ACT20X-HDI-SDO-RNO-S
Product image
ACT20X-HDI-SDO-RNO-S
Connection diagram
ACT20X-HDI-SDO-RNO-S
Application
ACT20X-HDI-SDO-RNO-S
Block diagram
ACT20X-HDI-SDO-RNO-S
ACT20X-HDI-SDO-RNO-S
ACT20X-HDI-SDO-RNO-S
ACT20X-HDI-SDO-RNO-S
Dimensioned drawing
ACT20X-HDI-SDO-RNO-S
Derating curve
Removable terminals with coding

ACT20X-HDI-SDO-RNO-S

EX signal isolating converter, Ex-input: NAMUR sensor/switch, Safe-output: relay, NO contact, 1-channel

Ürün No. 8965340000
Veri sayfasını indir Engineering Support Software Support Product Downloads
Aksesuarlar 3 İlgili ürünler 8
Approvals General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Assembling Input EX Output Digital output Output (Status) General specifications Insulation coordination Data for Ex applications (ATEX) Safety-related basic specifications Safety-related specifications Low demand mode Connection data Guarantee Part description Classifications Tender specification sheets

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319234/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319237/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319238/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319240/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319243/-S800/-T1z1mm-S80) 
Approvals
DNVGL; 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate no. (cULus)
E337701 

General ordering data

Version
EX signal isolating converter, Ex-input: NAMUR sensor/switch, Safe-output: relay, NO contact, 1-channel 
Order No.
8965340000 
Type
ACT20X-HDI-SDO-RNO-S 
GTIN (EAN)
4032248784851 
Qty.
1 adet

Dimensions and weights

Depth
113,6 mm
Depth (inches)
4,472 inch
Height
119,2 mm
Height (inches)
4,693 inch
Width
22,5 mm
Width (inches)
0,886 inch
Net weight
177 g

Temperatures

Storage temperature
-20 °C...85 °C 
Operating temperature
-20 °C...60 °C 
Humidity
0...95 % (no condensation) 

Probability of failure

SIL PAPER
[SIL certificate](PDF/Cert_Weidmueller_070902_P0002_C001_V2R1.pdf) 
SIL in compliance with IEC 61508
2 
MTBF
207 a

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Assembling

Mounting position
horizontal or vertical 
Mounting rail
TS 35 
Type of mounting
Snap mounting support rail 

Input EX

Input frequency
<20 Hz 
Input resistance
1 kΩ 
NAMUR supply
8 V DC / 8 mA 
Output signal in case of wire break
<0.1 mA 
> 6.5 mA (in case of wire break) 
Pulse duration
> 0.1 ms 
Resistance
RP = 750 Ω / RS = 15kΩ 
Sensor
NAMUR sensor, according to EN60947-5-6 
switch with or without RS, RP 
Sensor supply
8 V DC / 8 mA 
Trigger level high
> 2.1 mA 
Trigger level low
<1.2 mA 
Type
intrinsically safe circuit 

Output

Number of outputs
1 

Digital output

Continuous current
≤ 2 A AC/DC (safe area, Zone 2 area) 
Function
Output = input 
direct or inverse (configurable) 
Max. switching frequency
20 Hz 
Nominal switching voltage
≤ 250 V AC / 30 V DC (safe area)
≤ 32 V AC / 32 V DC (zone 2) 
Switching capacity
500 VA / 60 W (safe area) 
16 VA / 60 W (zone 2) 
Type
Relay, 1 NO 

Output (Status)

Alarm function
Device error 
No supply voltage 
Short circuit at input 
Open circuit at input 
Continuous current
≤ 0.5 A AC / 0.3 A DC (safe zone) 
≤ 0,5 A AC / 1 A DC (zone 2) 
Hysteresis
0.1 mA (switching threshold) 
Nominal switching voltage
≤ 125 V AC / 110 V DC (safe area)
≤ 32 V AC / 32 V DC (zone 2) 
Number of alarm outputs
1 
Power rating
≤ 62.5 VA / 32 W (safe area)
≤ 16 VA / 32 W (Zone 2) 
Type
Status relay 
1 NC (voltage-free) 

General specifications

Configuration
With FDT/DTM software 
Requires configuration adapter 8978580000 CBX200 USB 
Humidity
0...95 % (no condensation) 
Operating altitude
≤ 2000 m 
Power consumption
≤ 1.3 W 
Protection degree
IP20 
Supply voltage
19.2…31.2 V DC 
Type of connection
Screw connection 

Insulation coordination

EMC standards
EN 61326-1 
Insulation voltage
2.6 kV (input / output) 
Rated voltage
300 V 
Standards
EN 61010-1 

Data for Ex applications (ATEX)

Installation location
Device installed in safe area, zone 2 

Safety-related basic specifications

Description of the "safe state"
de-energized (relay output) 
Device type
B 
Diagnostic test interval
10 s
Tproof
4 a
Total failure rate for safe detected failures (λSD)
0 FIT
Hardware fault tolerance (HFT)
0 
Safety category
SIL 2 
Relay lifetime
100000 times 
Safe Failure Fraction (SFF)
90 %
Mean Time To Repair (MTTR)
8 h
Total failure rate for safe undetected failures (λSU)
289 FIT
Total failure rate for dangerous detected failures (λDD)
130 FIT
Total failure rate for dangerous undetected failures (λDU)
46 FIT
Probability of outage PFH
4.66 x 10-8 h-1 
Demand mode
High 
Demand rate
1.000 s
Demand response time
<10 ms (relay output) 

Safety-related specifications Low demand mode

Safe Failure Fraction (SFF)
90 %
Average Probability of Failure on Demand (PFDavg)
2.04 x 10-4 (Tproof = 1 year) 
4.08 x 10-4 (Tproof = 2 years) 
1.02 x 10-4 (Tproof = 5 years) 

Connection data

Type of connection
Screw connection 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,25 mm²
Clamping range, max.
2,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 12 

Guarantee

Time interval
3 years 

Part description

Product description
The devices of the ACT20X-HDI-SDO-S family transmit digital signals galvanic isolated from potentially explosive atmospheres to non-hazardous or less hazardous areas.
For this purpose the input circuits are designed intrinsically safe. They can process NAMUR sensor signals according to EN 60947-5-6 or be connected to potential-free contacts (with or without resistor circuitry).
Single and dual channel versions are available with relay or transistor outputs. 

Classifications

ETIM 6.0
EC002653 
ETIM 7.0
EC002653 
ETIM 8.0
EC002653 
ETIM 9.0
EC002653 
ETIM 10.0
EC002653 
ECLASS 9.0
27-21-01-20 
ECLASS 9.1
27-21-01-20 
ECLASS 10.0
27-21-01-20 
ECLASS 11.0
27-21-01-20 
ECLASS 12.0
27-21-01-20 
ECLASS 13.0
27-21-01-20 
ECLASS 14.0
27-21-01-20 
ECLASS 15.0
27-21-01-20 

Tender specification sheets

Long specification

Ex isolating switch amplifiers for Namur sensors
1-channel isolating switch amplifiers in 22.5 mm width with an external power supply,
to transmit and isolate Namur sensor signals from Ex zones 0,1,2 into the safe zone.
On the output side there is a potential-free relay contact with closing function and an alarm contact for
status/error messages.
The component can be configured using standard FDT/DTM software.

Add-on housing for TS35 DIN rail installation
Dimensions: L/W/H 119.2/ 22.5/ 113.6
Screw connection/ nominal cross-section 2.5 mm2
Protection degree: IP20  

Input                      NAMUR sensor according to EN 60947 
                                    8 VDC / 8 mA sensor power supply 
                                    0 to 5 kHz input frequency
                                    wire-break detection
Output                                            Relay 1 NO contact
                                     250 VAC / 30 VDC @ 2A safe zone
                                    32 VAC @ 0.5 A/ 32 VDC @ 1 A zone 2
Alarm output relay 1 NO contact 
                                     250 VAC / 30 VDC @ 2A safe zone
                                     32 VAC @ 0.5 A/ 32 VDC @ 1 A zone 2
Auxiliary power                                    19 to 31.2 VDC
Power loss approx. 1.8 W
Ambient
temperature range -20 °C to +60 °C



Secure isolation                 EN 61010, 3-way isolation up to 2.6 kV AC/DC of all circuits against each other
Working voltage                   300 V AC/DC at overvoltage category II and pollution degree 2
Approvals cULus, ATEX IECEX, FM

ATEX marking II 3 G ExnA nC IIC T4
ATEX characteristic data U0 = 10, 6 V DC
                                      I0  = 12 mA DC
                                      P0 = 32 W

Type                                                             ACT20X-HDI-SDO-RNO-S

 
Short specification

Ex isolating switch amplifiers for Namur sensors
1-channel isolating switch amplifiers in 22.5 mm width with an external power supply,
to transmit and isolate Namur sensor signals from Ex zones 0,1,2 into the safe zone.
On the output side there is a potential-free relay contact with closing function and an alarm contact for
status/error messages.
The component can be configured using standard FDT/DTM software.