DRMKITP 24VDC 4CO LD
Product image
Similar to illustration
DRMKITP 24VDC 4CO LD
Wiring diagram
DRMKITP 24VDC 4CO LD
Graph
DC load limit curve
Resistive load
DRMKITP 24VDC 4CO LD
Graph
Electrical service life
DRMKITP 24VDC 4CO LD
Graph
Derating curve
DRMKITP 24VDC 4CO LD
Graph
DC operational voltage range
DRMKITP 24VDC 4CO LD
Dimensional drawing
Relay in combination with base
DRMKITP 24VDC 4CO LD
Miscellaneous
Type codes

DRMKITP 24VDC 4CO LD

D-SERIES DRM, Relay module, Number of contacts: 4, CO contact AgNi flash gold-plated, Rated control voltage: 24 V DC, Continuous current: 5 A, PUSH IN, Test button available: No

Produkt ID 2576130000
Download datablad Engineering Support Product Downloads
Tilbehør 14 Enkeltdele 4 Anvendte produkter 8
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
D-SERIES DRM, Relay module, Number of contacts: 4, CO contact AgNi flash gold-plated, Rated control voltage: 24 V DC, Continuous current: 5 A, PUSH IN, Test button available: No 
Order No.
2576130000 
Type
DRMKITP 24VDC 4CO LD 
GTIN (EAN)
4050118585889 
Qty.
10 Styk

Dimensions and weights

Depth
82,3 mm
Depth (inches)
3,24 inch
Height
101,8 mm
Height (inches)
4,008 inch
Width
30,6 mm
Width (inches)
1,205 inch
Net weight
110,846 g

Temperatures

Storage temperature
-40 °C...70 °C 
Ambient temperature
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Control side

Rated control voltage
24 V DC 
Rated current DC
36.9 mA 
Power rating
0.9 W 
Coil resistance
630 Ω ± 10 % 
Status indicator
Green LED 
Protective circuit
Free-wheeling diode 

Load side

Rated switching voltage
250 V AC 
Continuous current
5 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Min. switching power
10 mA @ 12 V 
100 mA @ 5 V 
Inrush current
10 A / 50 ms 
AC switching capacity (resistive), max.
1250 VA 
DC switching capacity (resistive), max.
120 W @ 24 V 
Switch-on delay
<20 ms 
Switch-off delay
<20 ms 
Contact type
4 CO contact (AgNi flash gold-plated) 
Mechanical service life
20 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
No 
Mechanical switch position indicator
Yes 
Colour
black 
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Pusher
  • UL94 flammability rating:
    HB
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay status indicator
  • UL94 flammability rating:
    HB
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB

Insulation coordination

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Insulating material group
C 
Clearance and creepage distances for control side - load side
≥ 3 mm 
Dielectric strength for control side - load side
1.8 kVeff /1 min. 
Dielectric strength of neighbouring contacts
1 kVeff / 1 min 
Dielectric strength of open contact
1 kVeff / 1 min 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Certificate no. (cURus) base
E355547 

Connection data

Wire connection method
PUSH IN 
Stripping length, rated connection
10 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,14 mm²
Clamping range, max.
1,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 16 
Wire cross-section, solid, min.
0,14 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire connection cross section, finely stranded, min.
0,14 mm²
Wire connection cross section, finely stranded, max.
1,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,14 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,14 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5 mm²
Blade size
0.4 x 2.5 mm 

Classifications

ETIM 6.0
EC001437 
ETIM 7.0
EC001437 
ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 9.0
27-37-16-01 
ECLASS 9.1
27-37-16-01 
ECLASS 10.0
27-37-16-01 
ECLASS 11.0
27-37-16-01 
ECLASS 12.0
27-37-16-01 
ECLASS 13.0
27-37-16-01 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01