LM2NZF 5.08/04/135 3.5SN OR BX
Product image
Similar to illustration
LM2NZF 5.08/04/135 3.5SN OR BX
Dimensional drawing
LM2NZF 5.08/04/135 3.5SN OR BX
Graph

LM2NZF 5.08/04/135 3.5SN OR BX

Printed circuit board terminals, 5.08 mm, Number of poles: 4, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box

Produkt ID 1764810000
Download datablad Engineering Support Product Downloads
Anvendte produkter 19
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

ROHS
Conform  

General ordering data

Version
Printed circuit board terminals, 5.08 mm, Number of poles: 4, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box  
Order No.
1764810000  
Type
LM2NZF 5.08/04/135 3.5SN OR BX  
GTIN (EAN)
4032248102945  
Qty.
50  Styk
Product data
IEC: 630 V / 15 A / 0.2 - 2.5 mm²
UL: 300 V / 10 A / AWG 24 - AWG 14  
Packaging
Box  

Dimensions and weights

Depth
24,05  mm
Depth (inches)
0,947  inch
Height
29,1  mm
Height (inches)
1,146  inch
Height of lowest version
25,6  mm
Width
10,86  mm
Width (inches)
0,428  inch
Net weight
5,36  g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

System parameters

Product family
OMNIMATE Signal - series LMZF  
Wire connection method
Tension-clamp connection  
Mounting onto the PCB
THT solder connection  
Conductor outlet direction
135°  
Pitch in mm (P)
5,08  mm
Pitch in inches (P)
0,2  "
Number of poles
4  
Pin series quantity
2  
Fitted by customer
No  
Number of rows
2  
Solder pin length (l)
3,5  mm
Solder pin dimensions
0.7 x 1.0 mm  
Solder eyelet hole diameter (D)
1,3  mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm  
Number of solder pins per pole
1  
Screwdriver blade
0.6 x 3.5  
Screwdriver blade standard
DIN 5264-A  
Stripping length
7,5  mm
L1 in mm
5,08  mm
L1 in inches
0,2  "
Touch-safe protection acc. to DIN VDE 0470
IP 20  
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch  
Protection degree
IP20  
Volume resistance
2.10 mΩ  

Material data

Insulating material
PA  
Colour
orange  
Colour chart (similar)
RAL 2000  
Insulating material group
I  
Comparative Tracking Index (CTI)
≥ 600  
UL 94 flammability rating
V-0  
Contact material
Cu-alloy  
Storage temperature, min.
-40  °C
Storage temperature, max.
70  °C
Operating temperature, min.
-50  °C
Operating temperature, max.
100  °C
Temperature range, installation, min.
-25  °C
Temperature range, installation, max.
100  °C

Conductors suitable for connection

Clamping range, min.
0,13  mm²
Clamping range, max.
2,5  mm²
Wire connection cross section AWG, min.
AWG 24  
Wire connection cross section AWG, max.
AWG 14  
Solid, min. H05(07) V-U
0,2  mm²
Solid, max. H05(07) V-U
2,5  mm²
Flexible, min. H05(07) V-K
0,2  mm²
Flexible, max. H05(07) V-K
1,5  mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,25  mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
1,5  mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0,25  mm²
w. wire end ferrule, DIN 46228 pt 1, max.
1,5  mm²
Plug gauge in accordance with EN 60999 a x b; ø
2.4 mm x 1.5 mm  
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0372700000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage.  
The outside diameter of the plastic collar should not be larger than the pitch (P)  

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1  
IEC 61984  
Rated current, min. number of poles (Tu=20°C)
15  A
Rated current, max. number of poles (Tu=20°C)
12  A
Rated current, min. number of poles (Tu=40°C)
13  A
Rated current, max. number of poles (Tu=40°C)
10  A
Rated voltage for surge voltage class / pollution degree II/2
630  V
Rated voltage for surge voltage class / pollution degree III/2
320  V
Rated voltage for surge voltage class / pollution degree III/3
250  V
Rated impulse voltage for surge voltage class/ pollution degree II/2
4  kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
4  kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
4  kV

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
300  V
Rated voltage (Use group D / CSA)
300  V
Rated current (Use group B / CSA)
10  A
Rated current (Use group D / CSA)
10  A
Wire cross-section, AWG, min.
AWG 24  
Wire cross-section, AWG, max.
AWG 14  

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
300  V
Rated voltage (Use group D / UL 1059)
300  V
Rated current (Use group B / UL 1059)
10  A
Rated current (Use group D / UL 1059)
10  A
Wire cross-section, AWG, min.
AWG 24  
Wire cross-section, AWG, max.
AWG 14  

Packing

Packaging
Box  
VPE length
141  mm
VPE width
105  mm
VPE height
40  mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.  
Notes
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 6.0
EC002643  
ETIM 7.0
EC002643  
ETIM 8.0
EC002643  
ETIM 9.0
EC002643  
ETIM 10.0
EC002643  
ECLASS 9.0
27-44-04-01  
ECLASS 9.1
27-44-04-01  
ECLASS 10.0
27-44-04-01  
ECLASS 11.0
27-46-01-01  
ECLASS 12.0
27-46-01-01  
ECLASS 13.0
27-46-01-01  
ECLASS 14.0
27-46-01-01  
ECLASS 15.0
27-46-01-01