MCZ R 24VDC 1CO AU TRAK
Product image
Similar to illustration
MCZ R 24VDC 1CO AU TRAK
Product image
Similar to illustration
MCZ R 24VDC 1CO AU TRAK
Wiring diagram
MCZ R 24VDC 1CO AU TRAK
Graph
DC load limit curve
MCZ R 24VDC 1CO AU TRAK
Graph
Derating curve
MCZ R 24VDC 1CO AU TRAK
Dimensional drawing

MCZ R 24VDC 1CO AU TRAK

Dette produkt er snart ikke længere tilgængeligt.

Available until: 30.10.2026

Alternative product: 2773900000

MCZ-SERIES TRAK, Relay module, Number of contacts: 1, CO contact AgSnO gold-plated, Rated control voltage: 24 V DC +25 % / -30 %, Continuous current: 6 A, Tension-clamp connection, Test button available: No

Produkt ID 8790520000
Download datablad Engineering Support Product Downloads
Tilbehør 18 Anvendte produkter 3
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Connection data Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
MCZ-SERIES TRAK, Relay module, Number of contacts: 1, CO contact AgSnO gold-plated, Rated control voltage: 24 V DC +25 % / -30 %, Continuous current: 6 A, Tension-clamp connection, Test button available: No 
Order No.
8790520000 
Type
MCZ R 24VDC 1CO AU TRAK 
GTIN (EAN)
4032248479535 
Qty.
10 Styk
Delivery status
This article will no longer be available in the future. 
Available until
30.10.2026 
Alternative product
[2773900000](~/p/2773900000) 

Dimensions and weights

Depth
63,2 mm
Depth (inches)
2,488 inch
Height
91 mm
Height (inches)
3,583 inch
Width
6,1 mm
Width (inches)
0,24 inch
Net weight
27,4 g

Temperatures

Storage temperature
-40 °C...85 °C 
Ambient temperature
-25 °C…70 °C 
Humidity
95 % for 30 days, minimal condensation to EN 50155 
Note: room temperature (service)
+85 °C for 10 minutes 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
35d83707-6a3b-45b5-b9f8-6ba8184c863e 

Control side

Rated control voltage
24 V DC +25 % / -30 % 
Rated current DC
11.5...16.5 mA 
Power rating
195...500 mW 
Status indicator
Green LED 
Protective circuit
Free-wheeling diode 
Varistor 
Reverse polarity protection 
Max. reset time after voltage interruption
10 ms

Load side

Rated switching voltage
250 V AC 
Continuous current
6 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
1 mA @ 1 V 
Inrush current
6 A 
AC switching capacity (resistive), max.
1500 VA 
DC switching capacity (resistive), max.
120 W @ 24 V 
Switch-on delay
<11 ms 
Switch-off delay
<50 ms 
Contact type
1 CO contact (AgSnO gold-plated) 
Mechanical service life
10 x 106 switching cycles 

General data

Version
for railway applications 
Mounting rail
TS 35 
Test button available
No 
Mechanical switch position indicator
No 
Open sides
right 
Colour
beige 
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-0

Insulation coordination

Rated voltage
300 V
Pollution severity
2 
Surge voltage category
III 
Clearance and creepage distances for control side - load side
≥ 5.5 mm 
Dielectric strength for control side - load side
4 kVeff / 1 s 
Dielectric strength to mounting rail
4 kVeff / 1 Min. 
Impulse withstand voltage
4 kV (1.2/50 µs) 
Protection degree
IP20 

Connection data

Wire connection method
Tension-clamp connection 
Stripping length, rated connection
8 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
1,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 16 
Wire cross-section, solid, min.
0,5 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire cross-section, solid, min. (AWG)
AWG 26 
Wire cross-section, solid, max. (AWG)
AWG 16 
Wire connection cross section, finely stranded, min.
0,5 mm²
Wire connection cross section, finely stranded, max.
1,5 mm²
Wire cross-section, finely stranded, min. (AWG)
AWG 26 
Wire cross-section, finely stranded, max. (AWG)
AWG 16 
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5 mm²
Blade size
0.6 x 3.5 mm 

Classifications

ETIM 6.0
EC001437 
ETIM 7.0
EC001437 
ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 9.0
27-37-16-01 
ECLASS 9.1
27-37-16-01 
ECLASS 10.0
27-37-16-01 
ECLASS 11.0
27-37-16-01 
ECLASS 12.0
27-37-16-01 
ECLASS 13.0
27-37-16-01 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01