TOS 24VDC ACT
Product image
Similar to illustration
TOS 24VDC ACT
Wiring diagram
TOS 24VDC ACT
Dimensional drawing
TOS 24VDC ACT
Miscellaneous
Type codes
TOS 24VDC ACT
TOS 24VDC ACT

TOS 24VDC ACT

TERMSERIES, Solid-state relay, Rated control voltage: 24 V DC ±20 % , Rated switching voltage: 3...33 V DC, Continuous current: 2 A, Screw connection

Tuotteen tunnus 1391680000
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 28 Yksittäiset osat 1 Samankaltaiset tuotteet 1
Approvals General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Rated data UL Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319234/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80)  
ROHS
Conform  
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)  
Certificate no. (cULus)
E141197  

General ordering data

Version
TERMSERIES, Solid-state relay, Rated control voltage: 24 V DC ±20 % , Rated switching voltage: 3...33 V DC, Continuous current: 2 A, Screw connection  
Order No.
1391680000  
Type
TOS 24VDC ACT  
GTIN (EAN)
4050118192070  
Qty.
10  items

Dimensions and weights

Depth
87,8  mm
Depth (inches)
3,457  inch
Height
89,6  mm
Height (inches)
3,528  inch
Width
6,4  mm
Width (inches)
0,252  inch
Net weight
31,4  g

Temperatures

Storage temperature
-40 °C...70 °C  
Ambient temperature
-20 °C…60 °C  
Humidity
5-95% relative humidity, Tu = 40°C, without condensation  

Probability of failure

MTTF
1 077  a

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7a, 7cI  
REACH SVHC
Lead 7439-92-1  
SCIP
9e2cbc49-76d9-4611-b8ec-5b4f549a0aa9  

Rated data UL

Ambient temperature (operational), max.
60  °C
Output current derating (ohmic)
1.5 A @ 60 °C  
2 A @ 55 °C  
Connection cross-section AWG, min.
AWG 26  
Connection cross-section AWG, max.
AWG 14  
Type of conductor
rigid copper conductor  
flexible copper conductor  
Tightening torque, max.
0,4  Nm
Pollution severity level
2  

Control side

Rated control voltage
24 V DC ±20 %  
Nominal control current
11.5 mA DC (±10 %)  
Power rating
280 mW  
Status indicator
Green LED  
Protective circuit
Free-wheeling diode  
Reverse polarity protection  
Input frequency
300 Hz  
Coil voltage of the replacement relay deviating from the rated control voltage
No  
Coil voltage of the replacement relay
24 V DC  

Load side

Rated switching voltage
3...33 V DC  
Continuous current
2 A  
Rated switching current
2 A  
Inrush current
15 A / 10 ms  
Switch-on delay
≤0,1 ms  
Switch-off delay
<1 ms  
Voltage drop at max. load
≤ 120 mV  
Leakage current
<10 µA  
Min. switching current
5  mA
Short-circuit-proof
No  
Protective circuit, load side
Free-wheeling diode  
Contact type
1 NO contact (MOS-FET)  
max. switching frequency (DC control voltage)
300  Hz

General data

Version
Actuator version  
Mounting rail
TS 35  
Test button available
No  
Colour
black  
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-0
  • Component:
    Retaining clip
  • UL94 flammability rating:
    V-0

Insulation coordination

Rated voltage
300  V
Pollution severity
2  
Surge voltage category
III  
Clearance and creepage distances for control side - load side
≥ 5.5 mm  
Dielectric strength for control side - load side
2.5 kVeff  
Dielectric strength to mounting rail
4 kVeff / 1 Min.  
Impulse withstand voltage
6 kV (1.2/50 µs)  
Protection degree
IP20  

Further details of approvals / standards

Certificate No. (DNV)
TAA00001E5  
Certificate no. (cULus)
E141197  

Connection data

Wire connection method
Screw connection  
Stripping length, rated connection
8  mm
Tightening torque, max.
0,4  Nm
Clamping range, rated connection
1,5  mm²
Clamping range, min.
0,14  mm²
Clamping range, max.
2,5  mm²
Wire connection cross section AWG, min.
AWG 26  
Wire connection cross section AWG, max.
AWG 14  
Wire cross-section, solid, min.
0,14  mm²
Wire cross-section, solid, max.
2,5  mm²
Wire cross-section, solid, min. (AWG)
AWG 26  
Wire cross-section, solid, max. (AWG)
AWG 14  
Wire connection cross section, finely stranded, min.
0,14  mm²
Wire connection cross section, finely stranded, max.
2,5  mm²
Wire cross-section, finely stranded, min. (AWG)
AWG 26  
Wire cross-section, finely stranded, max. (AWG)
AWG 14  
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,25  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,25  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2,5  mm²
Wire connection cross section, finely stranded, two clampable wires, min.
0,5  mm²
Wire cross-section, finely stranded, two clampable wires, max.
1  mm²
Blade size
size PH0  

Classifications

ETIM 6.0
EC001504  
ETIM 7.0
EC001504  
ETIM 8.0
EC001504  
ETIM 9.0
EC001504  
ETIM 10.0
EC001504  
ECLASS 9.0
27-37-16-04  
ECLASS 9.1
27-37-16-04  
ECLASS 10.0
27-37-16-04  
ECLASS 11.0
27-37-16-04  
ECLASS 12.0
27-37-16-04  
ECLASS 13.0
27-37-16-04  
ECLASS 14.0
27-37-16-04  
ECLASS 15.0
27-37-16-04