TS 35X7.5/LL 2M/ST/SZ
Product image
TS 35X7.5/LL 2M/ST/SZ
Product image
Similar to illustration
TS 35X7.5/LL 2M/ST/SZ

TS 35X7.5/LL 2M/ST/SZ

Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 7.5 mm

Produkt ID 7915060000
Åbn i konfiguratoren
Download datablad Engineering-support Produktdownloads
Tilbehør 20 Er tilbehør til 115 Anvendte produkter 19
Approvals General ordering data Wymiary i masa Temperatures Environmental Product Compliance Mounting rail Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 7.5 mm 
Order No.
7915060000 
Type
TS 35X7.5/LL 2M/ST/SZ 
GTIN (EAN)
4032248296279 
Qty.
40 

Wymiary i masa

Depth
7,5 mm
Depth (inches)
0,295 inch
Height
35 mm
Height (inches)
1,378 inch
Width
2.000 mm
Width (inches)
78,74 inch
Net weight
300 g

Temperatures

Ambient temperature
-5 °C…40 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Mounting rail

Basic material
Steel 
Drill-hole diameter
5,2 mm
Installation advice
Direct mounting 
Length of the terminal rail
  • min.:
    0 mm
  • nominal:
    2.000 mm
  • max.:
    2.000 mm
Pre-punched mounting rail
Yes 
Short circuit strength corresponds to E-Cu wire
16 mm²
Short-time withstand current per second according to IEC 60947-7-2
1,92 kA
Slit gap
11 mm
Slit gap
  • min.:
    11 mm
  • nominal:
    11 mm
  • max.:
    11 mm
Slit length
25 mm
Slit length
  • min.:
    25 mm
  • nominal:
    25 mm
  • max.:
    25 mm
Slit width
5,2 mm
Slit width
  • min.:
    5,2 mm
  • nominal:
    5,2 mm
  • max.:
    5,2 mm
Slotted drill holes
Yes 
Solder eyelet hole diameter (D)
5,2 mm
Spacing of holes, centre-to-centre
36 mm
Standards
DIN EN 60715 
Surface finish
galvanic zinc plated and passivated 
Thickness
1 mm

Important note

Product information
Din rails with Sendzimier treatment have limited corrosion resistance on the outer and cut edges 

Classifications

ETIM 8.0
EC001285 
ETIM 9.0
EC001285 
ETIM 10.0
EC001285 
ECLASS 14.0
27-40-06-02 
ECLASS 15.0
27-40-06-02