VPU AC I F 1 275/25
Product image
Abb.ähnlich
VPU AC I F 1 275/25
Electric symbol
Schematic circuit diagram

VPU AC I F 1 275/25

Surge voltage arrester, Low voltage, Surge protection, Single-phase, TN

ID výrobku 2859330000
Im Konfigurator öffnen
Datenblatt herunterladen Engineering-support Produktdownloads
Tilbehør 3 Reservedele 2 Anvendte produkter 3
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Anslutningsdata fjärrmeddelande Allmänna data Insulation coordination acc. to EN 50178 Märkdata IEC/EN Connection data Electrical data General data Guarantee Important note Classifications

Approvals

Dopuszczenia
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/756ea985-024d-4142-85a7-acc2e9775394/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, Surge protection, Single-phase, TN 
Order No.
2859330000 
Type
VPU AC I F 1 275/25 
GTIN (EAN)
4064675570509 
Qty.
1 Styk

Dimensions and weights

Depth
86 mm
Depth (inches)
3,386 inch
Height
90 mm
Height (inches)
3,543 inch
Width
36 mm
Width (inches)
1,417 inch
Net weight
330 g

Temperatures

Температура хранения
-40 °C...85 °C 
Рабочая температура
-40 °C...85 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

Состояние соответствия RoHS
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Anslutningsdata fjärrmeddelande

Connection type
PUSH IN 

Allmänna data

Colour
svart 
orange 
Design
Installation housing; 2TE 
Insta IP 20 
Mounting rail
TS 35 
Operating altitude
≤ 2000 m 
Optical function display
green = OK; red = arrester is defective - replace 
Protection degree
IP20 in installed state 
Segment
Power distribution 
Suitable for
Count-in installation (leakage current free) 
UL 94 flammability rating
V-0 
Version
Surge protection 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
IV 

Märkdata IEC/EN

Clase de requisitos según IEC 61643-11
Typ I 
Typ II 
Typ III 
Corrente di scarica In (8/20 µs) filo-PE
25 kA 
Doba odezvy / doba havarijního stavu
<100 ns 
Energia koordináció (≤10 m)
Type I 
Type II 
Type III 
Frequenzbereich, max.
60 Hz
Frequenzbereich, min.
50 Hz
Fuse protection
internally available 
Geeignet für
Count-in installation (leakage current free) 
Lightning test current Iimp (10/350 µs) (L-PE)
25 kA
Lightning test current, Iimp (10/350 µs) (N-PE)
25 kA 
Low voltage network
Single-phase 
TN 
Max. continuous voltage, Uc (AC)
275 V 
Number of poles
1 
Protection level Up at IN (L/N-PE)
≤ 1.5 kV 
Rated voltage (AC)
230 V
Requirements class, acc. to EN 61643-11
T1 
T2 
T3 
Short-circuit current rating ISCCR
100 kA
Signalling contact
No 
Standards
IEC 61643-11 
EN 61643-11 
Temporary surge voltage (over-voltage) - TOV
442 V
Tension de réseau
230 V / 400 V 
Voltage type
AC 
Встроенный резервный предохранитель
Yes 
방전 전류 I최대 (8/20µs) 와이어-PE
65 kA 

Connection data

Stripping length
18 mm
Wire connection method
Screw connection 
Type of connection
Screw connection 
Длина снятия изоляции Измерительное соединение
18 mm
Момент затяжки, мин.
3 Nm
Tightening torque, max.
4,5 Nm
Clamping range, rated connection
16 mm²
Clamping range, min.
1,5 mm²
Clamping range, max.
35 mm²
Wire cross-section, solid, min.
1,5 mm²
Wire cross-section, solid, max.
35 mm²
Wire connection cross section, finely stranded, min.
1,5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
2,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
35 mm²
Connection cross-section, stranded, min.
1,5 mm²
Connection cross-section, stranded, max.
35 mm²

Electrical data

Voltage type
AC 

General data

Number of poles
1 
Protection degree
IP20 in installed state 
Colour
black 
orange 

Guarantee

Time interval
5 years 

Important note

Сведения об изделии
If F1 > 315A gG, then the integrated backup fuse always operates before F1 
Примечания
Additional tests for 100kA Isccr have been passed without certification. 

Classifications

ETIM 8.0
EC001457 
ETIM 9.0
EC001457 
ETIM 10.0
EC001457 
ECLASS 14.0
27-17-12-04 
ECLASS 15.0
27-17-12-04