VPU AC II F 2 300/40
Product image
Abb.ähnlich
VPU AC II F 2 300/40
Electric symbol
Schematic circuit diagram

VPU AC II F 2 300/40

Surge voltage arrester, Low voltage, Class II surge protection, no leakage current, Single-phase, TN-S

Product ID 2827590000
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 4 Onderdelen 2 Verwante producten 6
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Guarantee Important note Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
ROHS
Conform  

General ordering data

Version
Surge voltage arrester, Low voltage, Class II surge protection, no leakage current, Single-phase, TN-S  
Order No.
2827590000  
Type
VPU AC II F 2 300/40  
GTIN (EAN)
4064675366584  
Qty.
1  items

Dimensions and weights

Depth
68  mm
Depth (inches)
2,677  inch
Depth including DIN rail
76  mm
Height
90  mm
Height (inches)
3,543  inch
Width
36  mm
Width (inches)
1,417  inch
Net weight
268  g

Temperatures

Storage temperature
-40 °C...85 °C  
Operating temperature
-40 °C...85 °C  
Humidity
5 - 95% rel. humidity  

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

General data

Colour
orange  
black  
Design
Installation housing; 2TE  
Insta IP 20  
Mounting rail
TS 35  
Operating altitude
≤ 4000 m  
Optical function display
green = OK; red = arrester is defective - replace  
Protection degree
IP20 in installed state  
Segment
Power distribution  
UL 94 flammability rating
V-0  
Version
Class II surge protection, no leakage current  

Insulation coordination acc. to EN 50178

Pollution severity
2  
Surge voltage category
III  

Rated data IEC / EN

Combined pulse UOC
6  kV
Discharge current Imax (8/20µs) wire-PE
40 kA  
Discharge current In (8/20µs) wire-PE
20 kA  
Energy coordination (≤10 m)
Type II  
Type III  
Follow-on current extinguishing capability Ifi
Follow current need not be taken into account  
Frequency range, max.
60  Hz
Frequency range, min.
50  Hz
Fuse protection
Not required  
internally available  
Integrated back-up fuse
Yes  
Leakage current at Un
0,4  mA
Low voltage network
Single-phase  
TN-S  
Mains voltage
230 V / 400 V  
Max. continuous voltage, Uc (AC)
300 V  
Number of poles
1  
Protection level Up at IN (L/N-PE)
≤ 1.5 kV  
Rated voltage (AC)
230  V
Requirements category acc. to IEC 61643-11
Type II  
Type III  
Requirements class, acc. to EN 61643-11
T2  
T3  
Response time / fallback time
≤ 25 ns  
Short-circuit current rating ISCCR
100  kA
Signalling contact
No  
SPD type
T2  
T3  
Standards
IEC 61643-11  
EN 61643-11  
Temporary surge voltage (over-voltage) - TOV
337  V
Voltage type
AC  

Connection data

Stripping length
18  mm
Wire connection method
Screw connection  
Type of connection
Screw connection  
Stripping length, rated connection
18  mm
Tightening torque, min.
3  Nm
Tightening torque, max.
4,5  Nm
Clamping range, rated connection
16  mm²
Clamping range, min.
1,5  mm²
Clamping range, max.
35  mm²
Wire connection cross section AWG, min.
AWG 16  
Wire connection cross section AWG, max.
AWG 2  
Wire cross-section, solid, min.
1,5  mm²
Wire cross-section, solid, max.
35  mm²
Wire connection cross section, finely stranded, min.
1,5  mm²
Wire connection cross section, finely stranded, max.
35  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
2,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
25  mm²
Connection cross-section, stranded, min.
1,5  mm²
Connection cross-section, stranded, max.
35  mm²

Electrical data

Voltage type
AC  

General data

Number of poles
1  
Protection degree
IP20 in installed state  
Colour
orange  
black  

Guarantee

Time interval
5 years  

Important note

Product information
If F1 > 63A gG, then the integrated backup fuse always operates before F1  

Classifications

ETIM 7.0
EC000941  
ETIM 8.0
EC000941  
ETIM 9.0
EC000941  
ETIM 10.0
EC000941  
ECLASS 12.0
27-17-12-02  
ECLASS 13.0
27-17-12-02  
ECLASS 14.0
27-17-12-02  
ECLASS 15.0
27-17-12-02