BVFL 7.62HP/05/180F SN BK BX
Product image
BVFL 7.62HP/05/180F SN BK BX
Product image
BVFL 7.62HP/05/180F SN BK BX
Dimensional drawing
BVFL 7.62HP/05/180F SN BK BX
Graph
BVFL 7.62HP/05/180F SN BK BX
Graph
Installation without tools
Outlet direction: 90° und 180°
BVFL 7.62HP/05/180F SN BK BX
Graph
BVFL 7.62HP/05/180F SN BK BX
Product benefits
Secure connection of small conductors
PUSH IN WIRE READY
BVFL 7.62HP/05/180F SN BK BX
Product benefits
Installation without tools
Outlet direction: 90° und 180°

BVFL 7.62HP/05/180F SN BK BX

PCB plug-in connector, female plug, 7.62 mm, Number of poles: 5, 180°, PUSH IN with actuator, Clamping range, max. : 6 mm², Box

Produkt ID 2549350000
Download datablad Engineering-support Produktdownloads
Tilbehør 3 Modstykker 6 Anvendte produkter 4
Approvals General ordering data Wymiary i masa Экологическое соответствие изделия Системные параметры Данные о материалах Anslutningsbara ledare Dane znamionowe wg IEC Rated data acc. to CSA Rated data acc. to UL 1059 Упаковка Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
PCB plug-in connector, female plug, 7.62 mm, Number of poles: 5, 180°, PUSH IN with actuator, Clamping range, max. : 6 mm², Box 
Order No.
2549350000 
Type
BVFL 7.62HP/05/180F SN BK BX 
GTIN (EAN)
4050118558821 
Qty.
36 Styk
Product data
IEC: 1000 V / 41 A / 0.5 - 6 mm²
UL: 600 V / 39 A / AWG 24 - AWG 8 
Packaging
Box 

Wymiary i masa

Depth
52,1 mm
Głębokość (cale)
2,051 inch
Height
20,6 mm
Height (inches)
0,811 inch
Peso neto
23,806 g

Экологическое соответствие изделия

RoHS Compliance Status
Kompatibel utan undantag 
REACH SVHC
No SVHC above 0.1 wt% 

Системные параметры

Product family
OMNIMATE Power — серия BV/SV 7.62HP 
Field connection 
Wire connection method
PUSH IN with actuator 
Pitch in mm (P)
7,62 mm
Pitch in inches (P)
0,3 "
Conductor outlet direction
180° 
Number of poles
5 
L1 in mm
30,48 mm
L1 in inches
1,2 "
Number of rows
1 
Pin series quantity
1 
Rated cross-section
6 mm²
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Protection degree
IP20 
Volume resistance
4.50 mΩ 
Kodierbar
Yes 
Stripping length
12 mm
Screwdriver blade
0.6 x 3.5 
Plugging cycles
25 

Данные о материалах

Materiał izolacyjny
PA GF 
Barwny
black 
kolor elementów uruchamiających
white 
Colour chart (similar)
RAL 9011 
grupa materiałów izolacyjnych
II 
Porównywalny wskaźnik śledzenia (CTI)
≥ 600 
UL 94 flammability rating
V-0 
Contact material
Cu-alloy 
Contact surface
tinned 
Struttura a strati del connettore maschio
6...8 µm Sn glossy 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
125 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
125 °C

Anslutningsbara ledare

Sección de embornado, mín.
0,5 mm²
Sección de embornado, máx.
6 mm²
jednodrutowe, min. H05(07) V-U
0,5 mm²
Solid, max. H05(07) V-U
6 mm²
cienkodrutowe, min. H05(07) V-K
0,5 mm²
cienkodrutowe, maks. H05(07) V-K
6 mm²
con term. tub. con aislamiento DIN 46 228/4,mín.
0,5 mm²
z AEH z kołnierzem DIN 46 228/4, maks.
6 mm²
z tulejką zaciskową, DIN 46228 pt 1, min.
0,5 mm²
z końcówką kablową wg DIN 46 228/1, maks.
6 mm²
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      0409500000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      9025910000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        15 mm
    • Recommended wire-end ferrule:
      9025930000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9004060000
    • Stripping length:
      • nominal:
        15 mm
    • Recommended wire-end ferrule:
      9019140000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0186100000
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      9019170000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      4 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0244100000
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      9019200000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      6 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0191900000
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      0533500000
Testo di riferimento
The outside diameter of the plastic collar should not be larger than the pitch (P) 
Length of ferrules is to be chosen depending on the product and the rated voltage. 

Dane znamionowe wg IEC

przetestowane zgodnie z normą
IEC 60664-1 
IEC 61984 
Prąd znamionowy, min. liczba biegunów (Tu=20°C)
41 A
Prąd znamionowy, maks. liczba biegunów (Tu=20°C)
41 A
Rated current, min. number of poles (Tu=40°C)
41 A
Prąd znamionowy, maks. liczba biegunów (Tu=40°C)
38 A
napięcie znamionowe przy kat. przepięć/stopniu zanieczyszczenia II/2
1.000 V
napięcie znamionowe przy kat. przepięć/stopniu zanieczyszczenia III/2
1.000 V
napięcie znamionowe przy kat. przepięć/stopniu zanieczyszczenia III/3
800 V
znamionowe napięcie udarowe przy kat. przepięć/stopniu zanieczyszczenia II/2
6 kV
znamionowe napięcie udarowe przy kat. przepięć/stopniu zanieczyszczenia III/2
8 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
8 kV
단시간 내전류 저항
3 x 1s with 420 A 
Clearance, min.
10,4 mm
Kúszóút, min.
12,7 mm

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
600 V
Rated voltage (Use group C / CSA)
600 V
Rated voltage (Use group D / CSA)
600 V
Rated current (Use group B / CSA)
33 A
Rated current (Use group C / CSA)
33 A
Rated current (Use group D / CSA)
5 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 8 

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
600 V
Rated voltage (Use group C / UL 1059)
600 V
Rated voltage (Use group D / UL 1059)
600 V
Rated current (Use group B / UL 1059)
39 A
Rated current (Use group C / UL 1059)
39 A
Rated current (Use group D / UL 1059)
5 A
Wire cross-section, AWG, min.
AWG 24 
Leiteranschlussquerschnitt AWG, max.
AWG 8 

Упаковка

Packaging
Ящик 
VPE length
353 mm
VPE width
146 mm
VPE height
61 mm

Important note

Conformidad con IPC
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Wire end ferrule with plastic collar to DIN 46228/4
  • Wire end ferrule without plastic collar to DIN 46228/1
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Additional pole combinations on request
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002638 
ETIM 9.0
EC002638 
ETIM 10.0
EC002638 
ECLASS 14.0
27-46-02-02 
ECLASS 15.0
27-46-02-02