TOPL 24-110VDC 5-110VDC0.25A TRAK
Similar to illustration
TOPL 24-110VDC 5-110VDC0.25A TRAK
Similar to illustration
TOPL 24-110VDC 5-110VDC0.25A TRAK
Wiring diagram
TOPL 24-110VDC 5-110VDC0.25A TRAK
Graph
DC load limit curve
Resistive load
TOPL 24-110VDC 5-110VDC0.25A TRAK
Dimensional drawing
TOPL 24-110VDC 5-110VDC0.25A TRAK
Miscellaneous

TOPL 24-110VDC 5-110VDC0.25A TRAK

TERMSERIES-compact, Solid-state relay, Rated control voltage: 24...110 V DC -30 / +25 % , Rated switching voltage: 5...110 V DC, Continuous current: 250 mA, PUSH IN

Product ID 2773600000
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 28 Verwante producten 1
General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Control side Load side General data Insulation coordination Connection data Classifications Approvals

General ordering data

Version
TERMSERIES-compact, Solid-state relay, Rated control voltage: 24...110 V DC -30 / +25 % , Rated switching voltage: 5...110 V DC, Continuous current: 250 mA, PUSH IN  
Order No.
2773600000  
Type
TOPL 24-110VDC 5-110VDC0.25A TRAK  
GTIN (EAN)
4064675037378  
Qty.
10  items

Dimensions and weights

Depth
62,5  mm
Depth (inches)
2,461  inch
Height
89,4  mm
Height (inches)
3,52  inch
Width
6,4  mm
Width (inches)
0,252  inch
Net weight
27,2  g

Temperatures

Storage temperature
-40 °C...85 °C  
Operating temperature
-40 °C...70 °C  
Humidity
5-85% relative humidity, Tu = 40°C, without condensation  

Probability of failure

MTTF
2.551  a

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7a, 7cI  
REACH SVHC
Lead 7439-92-1  

Control side

Rated control voltage
24...110 V DC -30 / +25 %  
Rated control voltage (control input)
24...110 V DC -30 / +25 %  
Rated current DC
1.9 mA @ 24 V DC  
3.2 mA @ 110 V DC  
Power rating
46 mW @ 24 V DC  
352 mW @ 110 V DC  
Status indicator
Green LED  
Protective circuit
Reverse polarity protection  
Input frequency
10 Hz  

Load side

Rated switching voltage
5...110 V DC  
Continuous current
0.25 A  
Max. switching frequency at rated load
0,1  Hz
Inrush current
3.4 mA @ 24 V DC  
11.4 mA @ 110 V DC  
Switch-on delay
<4 ms  
Switch-off delay
<150 ms  
Protective circuit, load side
Suppressor diode  
Free-wheeling diode  
Contact type
NO contact (Transistor)  

General data

Operating altitude
≤ 2000 m  
above sea level  
Version
for railway applications  
Rail
TS 35  
Test button available
No  
Mechanical switch position indicator
No  
Colour
black  
UL 94 flammability rating
V-0  
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-0
  • Component:
    Relay status indicator
  • UL94 flammability rating:
    V-0
  • Component:
    Pusher
  • UL94 flammability rating:
    V-0

Insulation coordination

Pollution severity
2  
Surge voltage category
III  
Clearance and creepage distances for control side - load side
8 mm  
Dielectric strength for control side - load side
2.5 kVeff  
Type of isolation at input and output
reinforced insulation  
Dielectric strength to mounting rail
4 kVeff / 1 Min.  
Impulse withstand voltage
6 kV (1.2/50 µs)  
Protection degree
IP20  

Connection data

Stripping length
9  mm
Wire connection method
PUSH IN  
Stripping length, rated connection
9  mm
Clamping range, rated connection
1,5  mm²
Clamping range, min.
0,14  mm²
Clamping range, max.
2,5  mm²
Wire connection cross section AWG, min.
AWG 26  
Wire connection cross section AWG, max.
AWG 14  
Wire cross-section, solid, min.
0,5  mm²
Wire cross-section, solid, max.
1,5  mm²
Wire cross-section, solid, min. (AWG)
AWG 26  
Wire cross-section, solid, max. (AWG)
AWG 14  
Wire connection cross section, finely stranded, min.
0,35  mm²
Wire connection cross section, finely stranded, max.
2,5  mm²
Wire cross-section, finely stranded, min. (AWG)
AWG 26  
Wire cross-section, finely stranded, max. (AWG)
AWG 14  
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,14  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5  mm²
Blade size
0.6 x 3.5 mm  

Classifications

ETIM 6.0
EC001504  
ETIM 7.0
EC001504  
ETIM 8.0
EC001504  
ETIM 9.0
EC001504  
ETIM 10.0
EC001504  
ECLASS 9.0
27-37-16-04  
ECLASS 9.1
27-37-16-04  
ECLASS 10.0
27-37-16-04  
ECLASS 11.0
27-37-16-04  
ECLASS 12.0
27-37-16-04  
ECLASS 13.0
27-37-16-04  
ECLASS 14.0
27-37-16-04  
ECLASS 15.0
27-37-16-04  

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80)