ACT20P-CI-2CO-OLP-P
Product image
ACT20P-CI-2CO-OLP-P
Connection diagram
ACT20P-CI-2CO-OLP-P
Dimensioned drawing
ACT20P-CI-2CO-OLP-P
Similar to illustration
ACT20P-CI-2CO-OLP-P
Drawing

ACT20P-CI-2CO-OLP-P

Aisladores pasivos, Entrada : 4-20 mA, Salida : 2 x 4-20 mA, (alimentado por bucle de corriente), Amplificador de señal, Alimentado por bucle de corriente de salida

Produkt ID 2619390000
Åbn i konfiguratoren
Download datablad Engineering Support Product Downloads
Tilbehør 2 Enkeltdele 1 Anvendte produkter 14
Approvals Datos generales para pedido Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Input Output General data Insulation coordination Data for Ex applications (ATEX) Connection data Part description Besorolások

Approvals

Dopuszczenia
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319213/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319240/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80) 
ROHS
Megfelel 

Datos generales para pedido

Versione
Aisladores pasivos, Entrada : 4-20 mA, Salida : 2 x 4-20 mA, (alimentado por bucle de corriente), Amplificador de señal, Alimentado por bucle de corriente de salida 
Order No.
2619390000 
Tipo
ACT20P-CI-2CO-OLP-P 
GTIN (EAN)
4050118622904 
Кол.
1 szt.

Dimensions and weights

Profondeur
114 mm
Profundidad (pulgadas)
4,488 inch
Posizione verticale
127,1 mm
Magasság (coll)
5,004 inch
Larghezza
12,5 mm
Larghezza (pollici)
0,492 inch
Net weight
140 g

Temperatures

Lagertemperatur
-40 °C...85 °C 
Operating temperature
-20 °C...60 °C 
Humidity at operating temperature
0...95 % (no condensation) 
Humidity
5...95 %, no condensation 

Probability of failure

SIL según IEC 61508
None 

Environmental Product Compliance

RoHS Compliance Status
Conforme con exención 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Input current
4…20mA 
Number inputs
1 
Sensor
4- wire sensor (with own power supply) 
Current source 
Voltage drop, current input
<3 V 

Output

Load impedance current
RL = (UB-12 V) / 20 ± 20mA, e.g. 600 Ω at 24 V 
Output current
4...20 mA, loop-powered 
Type
passive 
connected control must be active 

General data

Accuracy
<0.1 % of end value 
Configuration
none 
Mounting rail
TS 35 
Nominal power consumption
2 VA
Operating altitude
≤ 2000 m 
Protection degree
IP20 
Step response time
≤ 2 ms 
Supply voltage
via output current loop 
min. 12 V DC/ max. 30 V DC 
Type of signal forwarding according to HART®
nezměněno 

Insulation coordination

EMC standards
EN 61326-1 
EN 61000-6-2 
EN 61000-6-4 
Impulse withstand voltage
4 kV (1.2/50 µs) 
Insulation voltage
2 kV (Input /Output), 1 min, 50 Hz 
Rated voltage
300 V 
Surge voltage category
III 

Data for Ex applications (ATEX)

IECEx - gas labelling
Ex ec IIC T6 Gc 
Marking
II 3 G Ex ec IIC T6 Gc 

Connection data

Type of connection
PUSH IN 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
2,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 14 
Wire cross-section, solid, min.
0,5 mm²
Wire cross-section, solid, max.
2,5 mm²
Wire connection cross section, finely stranded, min.
0,5 mm²
Wire connection cross section, finely stranded, max.
2,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,2 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2,5 mm²

Part description

Product description
The ACT20P-CI-2CO-OLP-S fixed passive isolator isolates analogue standard current source signals. An analogue input current signal is converted linearly and doubled to provide two galvanically separated output current signals. The device is powered via the output current loop.

Features
  • 3-way galvanic isolation between input, output 1 and output 2.
 

Besorolások

ETIM 8.0
EC002653 
ETIM 9.0
EC002653 
ETIM 10.0
EC002653 
ECLASS 14.0
27-21-01-20 
ECLASS 15.0
27-21-01-20