ACT20P-UI-2RCO-AC-S
Product image
ACT20P-UI-2RCO-AC-S
ACT20P-UI-2RCO-AC-S
Dimensioned drawing
ACT20P-UI-2RCO-AC-S
Similar to illustration
ACT20P-UI-2RCO-AC-S
ACT20P-UI-2RCO-AC-S
ACT20P-UI-2RCO-AC-S

ACT20P-UI-2RCO-AC-S

Monitorowanie wartości granicznej, Wejście : Uniwersalny U, I, R,ϑ, Wyjście : 2 x przekaźniki, Zasilanie 90…264 V AC

Ürün No. 1238910000
Konfigüratörde aç
Veri sayfasını indir Supporto ingegneristico Supporto software 製品ダウンロード
Aksesuarlar 3 Münferit parçalar 1 İlgili ürünler 18
Omologazioni Ogólne dane zamówieniowe Dimensioni e pesi Temperatury Probability of failure Environmental Product Compliance Input Output Output (digital) General data Insulation coordination Connection data Part description Classifications Testi descrittivi per l'offerta

Omologazioni

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_322323/-S800/-T1z1mm-S80) 
Approvals
CULUS; 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate no. (cULusEX)
E338066 

Ogólne dane zamówieniowe

Version
Monitorowanie wartości granicznej, Wejście : Uniwersalny U, I, R,ϑ, Wyjście : 2 x przekaźniki, Zasilanie 90…264 V AC 
Order No.
1238910000 
Type
ACT20P-UI-2RCO-AC-S 
GTIN (EAN)
4050118027075 
Qty.
1 adet

Dimensioni e pesi

Depth
113,6 mm
Głębokość (cale)
4,472 inch
Height
119,2 mm
Height (inches)
4,693 inch
Width
22,5 mm
Width (inches)
0,886 inch
Net weight
345,685 g

Temperatury

Storage temperature
-20 °C...70 °C 
Operating temperature
-20 °C...60 °C 
Humidity at operating temperature
0...95 % (no condensation) 
Humidity
10…90 %, no condensation 

Probability of failure

SIL in compliance with IEC 61508
None 
MTBF
180 a

Environmental Product Compliance

RoHS Compliance Status
Zgodne, z wyłączeniem 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Cable-length compensation
<±0.002 Ω per cable resistance Ω 
Influence of the sensor cable resistance
5 Ω @ RTD- Kabel 
Input current
configurable 
± 25 mA DC 
±5 A DC 
Input resistance, current
40 Ω 
Input resistance, voltage
2 MΩ 
> 10 MΩ 
Input voltage
configurable 
±150 mV DC 
± 600mV DC 
±30 V DC 
±300 V DC 
Number inputs
1 
Potentiometer
1.2…500 kΩ 
Resistance
0…10 kΩ 
0…12 kΩ 
0…15 kΩ 
Sensor
RTD (2,3-wire): Pt100, Pt200, Pt1000, Ni120, Cu10 
Thermocouples: B, E, J, K, L, N, R, S, T,U 
Sensor supply
0,1 mA / 0,05 mA (v závislosti na měřicím rozsahu) u RTD kabelu 
24 V (ve smyčce 4-20 mA) 
Temperature input range
B: +100…+1820 °C 
E: -270…+1000 °C 
J: (-210…+1200 °C) 
K: -270…+1372 °C 
L: +100…+900 °C 
N: (-180…+1300 °C) 
R: -50…+1768 °C 
S: -50…+1768 °C 
T: -270…+400 °C 
U: -200…+600 °C 

Output

Number of outputs
2 

Output (digital)

Max. switching voltage, AC
250 V
Rated switching current
200mA @ 110Vdc 
6A @ 24Vdc / 240Vac 
Salidas digitales
2 
Tension de commutation DC, max.
110 V
Típus
2 přepínací kontakty 
normální/inverzní úprava 
Spínací kmitočet 20 Hz 
알람 기능
nastavitelné 
Horní a spodní mezní hodnota, rozsah 
Prodleva výstrahy: 0–99 s 
Nastavitelná hystereze 
auto / manual reset 

General data

Accuracy
<0.1 % of measuring range 
Cold-junction compensation error
±2.0°C @ -20° C - 70°C 
Einsatzhöhe
≤ 2000 m 
Konfigurace
With FDT/DTM software 
or via 7-segment display, push-buttons and rotary encoder on the device itself 
Requires configuration adapter 8978580000 CBX200 USB 
Long-term drift
0.1 % / 10.000 h 
Mounting rail
TS 35 
Nominal power consumption
1,5 VA
Power consumption
≤ 3.5 W 
<2 W 
Protection degree
IP20 
Repeat accuracy
± 0.05 % of measuring range final value 
Step response time
450 ms 
Supply voltage
90…264 V AC 
Temperature coefficient
<0.02 °C měřicího rozsahu / °C 
350 ppm/K 

Insulation coordination

EMC standards
EN 61326-1 
Galvanic isolation
between input ⁄ output ⁄ supply ⁄ relay 
Impulse withstand voltage
4 kV (1.2/50 µs) 
Insulation voltage
4 kV (input / output) 
Pollution severity
2 
Rated voltage
300 Veff 
Surge voltage category
III 
Test voltage
0,3 kV

Connection data

Type of connection
Screw connection 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
2,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 12 

Part description

Product description
The devices of the ACT20P-UI-2RCO-XX-x family record current, voltage, potentiometer and temperature sensor signals (mA, A, mV, V, potentiometer, RTD and TC). They have two independent relay outputs which emit an alarm when levels exceed or fall below pre-set limits.

Properties

  • Configuration and diagnosis with the FDT/DTM software “WI-Manager”.
  • Manual configuration on the device is performed via the LED display by means of operating buttons and rotary encoders.
  • The dual-channel trip amplifier enables various alarm functions: window alarm, alarm delay, wire break detection, hysteresis and upper / lower limit alarm.
  • The active or passive signal inputs for RTD, TC, potentiometer, voltage and current are fully galvanically isolated.
  • Remote diagnosis: reporting of errors (e.g. cable breaks) via status relay.
  • Operational status and relay status indicated by front panel LEDs.
  • Galvanic 4-way isolation between input, output and supply.
 

Classifications

ETIM 8.0
EC002654 
ETIM 9.0
EC002654 
ETIM 10.0
EC002654 
ECLASS 14.0
27-21-01-22 
ECLASS 15.0
27-21-01-22 

Testi descrittivi per l'offerta

Long specification

릴레이 출력 및 외부 공급이 채용된 범용 제한값 모니터링
콤포넌트
22.5 mm 폭, 외부 전압 및 센서 공급이 채용된 범용 제한값 모니터링 콤포넌트,
DC 전류 +/- 25mA~5 A,
DC 전압 +/-600 mV~ 300 V 모니터링 및 절연용, 2-/3-/-4-와이어 RTD 센서, 저항기, 전위차계
및 써모커플 신호, IEC584 준수.
두 개의 릴레이 접점(CO)을 출력 측에서 사용할 수 있습니다.
이 콤포넌트는 FDT/DTM 소프트웨어를 사용하여 프로그래밍합니다.

TS 35 레일 장착용 애드온 하우징
크기: L/W/H 119/ 22.5/ 113.6 mm
스크류 결선 / 공칭 단면적 2.5 mm2
보호 등급: IP 20  

입력                         +/-25 mA~5 A DC                                      
                                      +/- 600 mV~300 V DC
                                      PT100, PT1000, Ni100, Ni1000
                                      저항 0~12 kOhm
                                      전위차계 0~500 kOhm
                                      써모커플 유형 B, E, J, K, L, LR, N, R, S, T, U, W3, W5
센서 공급 24 V DC  
출력                                             2 x 1 CO(경화 금도금) 
                                     240 V AC/ 24 V DC @ 6 A
반복 정확도        < 0,05 % v. E.  
스텝 반응 시간
10~90 %                      < 200 ms
보조 전원                                     90~264 V AC / 120~370 V DC
전력 손실 약 3 W @ 240 V AC
주변
온도 범위 -20 °C~+70 °C



절연                                 EN 50178, 서로 간 모든 회로의 최대 3 kV AC/DC 3-웨이 절연
테스트 전압                                보조 전원에 대해 출력에 대해 3 kV 입력
정격
전압                                       과전압 범주 II 및 오염 등급 2에서 300 V AC/DC

인증 cULus




유형                                                            ACT20P-UI-2RCO-AC-S


 
Short specification
Universal limit-value monitoring component with relay output and
external supply
Universal limit-value monitoring component in 22.5 mm width with external voltage
and sensor supply for monitoring and isolating DC currents +/- 25mA...5 A,
DC- voltages +/-600 mV... 300 V, 2-/3-/-4-wire RTD sensors, resistors, potentiometers
and thermocouple signals, in compliance with IEC584.
Two relay contacts (CO) are available on the output side.
This component is programmed using FDT/DTM software.