ACT20P-UI-2RCO-DC-P
Product image
ACT20P-UI-2RCO-DC-P
ACT20P-UI-2RCO-DC-P
Dimensioned drawing
ACT20P-UI-2RCO-DC-P
Similar to illustration
ACT20P-UI-2RCO-DC-P
ACT20P-UI-2RCO-DC-P
ACT20P-UI-2RCO-DC-P
Example of use
ACT20P-UI-2RCO-DC-P

ACT20P-UI-2RCO-DC-P

Limit value monitoring, Input : universal U, I, R,ϑ, Output : 2 x relays, Input: temperature, R, U, I, Relay output, 24 V DC power supply

Tuotteen tunnus 2456840000
Avaa konfiguraattorissa
Lataa tietosivu Engineering Support Software Support Product Downloads
Tilbehør 3 Enkeltdele 1 Anvendte produkter 18
Approvals General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Input Wyjście Output (digital) General data Insulation coordination Connection data Part description Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
Approvals
CULUS; 
ROHS
Conform 

General ordering data

Version
Limit value monitoring, Input : universal U, I, R,ϑ, Output : 2 x relays, Input: temperature, R, U, I, Relay output, 24 V DC power supply 
Order No.
2456840000 
Type
ACT20P-UI-2RCO-DC-P 
GTIN (EAN)
4050118471779 
Qty.
1 Styk

Dimensions and weights

Depth
113.6 mm
Depth (inches)
4.472 inch
Height
127.1 mm
Height (inches)
5.004 inch
Width
22.5 mm
Width (inches)
0.886 inch
Net weight
166 g

Temperatures

Temperatura de almacenamiento
-20 °C...70 °C 
Température de fonctionnement
-20 °C...60 °C 
Humidity at operating temperature
0...95 % (no condensation) 
Humidity
10…90 %, no condensation 

Probability of failure

SIL in compliance with IEC 61508
None 
MTBF
180 a

Environmental Product Compliance

Stato conformità RoHS
Compliant with exemption 
RoHS alóli kivétel (ha van/ismert ilyen)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Antal ingångar
1 
Corrente d'ingresso
configurable 
± 25 mA DC 
±5 A DC 
Input resistance, current
40 Ω 
Input voltage
configurable 
±150 mV DC 
± 600mV DC 
±30 V DC 
±300 V DC 
Potentiometer
1.2…500 kΩ 
Påverkan på givarledningarnas motstånd
5 Ω @ RTD- Kabel 
Résistance
0…10 kΩ 
0…12 kΩ 
0…15 kΩ 
Sensor
Thermocouples: B, E, J, K, L, N, R, S, T, U 
RTD: PT100, PT200, PT1000, Ni120, Cu10, 2-/3-/4-wire 
Sensor supply
0.1 mA / 0.05 mA (depending on measuring range) @ RTD cable 
24 V (@ 4-20 mA loop) 
Temperatur-Eingangsbereich
B: +100…+1820 °C 
E: -270…+1000 °C 
J: (-210…+1200 °C) 
K: -270…+1372 °C 
L: +100…+900 °C 
N: (-180…+1300 °C) 
R: -50…+1768 °C 
S: -50…+1768 °C 
T: -270…+400 °C 
U: -200…+600 °C 
Компенсация длины линии
<±0.002 Ω per cable resistance Ω 
입력 저항, 전압
2 MΩ 
> 10 MΩ 

Wyjście

Numero di uscite
2 

Output (digital)

Alarm function
configurable 
Top and bottom limit values, window range 
Alarm delay: 0…99 s 
Hysteresis adjustable 
auto / manual reset 
Max. switching voltage, AC
250 V
Max. switching voltage, DC
110 V
Number of digital outputs
2 
Rated switching current
200mA @ 110Vdc 
6A @ 24Vdc / 240Vac 
Type
2 CO contacts 
normal / inverse adjustment 
Switching frequency 20 Hz 

General data

Accuracy
<0.1 % of measuring range 
Cold-junction compensation error
±2.0°C @ -20° C - 70°C 
Configuration
With FDT/DTM software 
or via 7-segment display, push-buttons and rotary encoder on the device itself 
Requires configuration adapter 8978580000 CBX200 USB 
Long-term drift
0,1 % / 10.000 h 
Mounting rail
TS 35 
Nominal power consumption
1.5 VA
Operating altitude
≤ 2000 m 
Power consumption
≤ 3.5 W 
<2 W 
Protection degree
IP20 
Repeat accuracy
± 0.05 % of measuring range final value 
Step response time
450 ms 
Supply voltage
9...60 V DC 
Temperature coefficient
<0.02 °C of measuring range / °C 
350 ppm/K 

Insulation coordination

EMC standards
EN 61326-1 
Galvanic isolation
between input ⁄ output ⁄ supply ⁄ relay 
Impulse withstand voltage
4 kV (1.2/50 µs) 
Insulation voltage
4 kV (input / output) 
Pollution severity
2 
Rated voltage
300 Veff 
Surge voltage category
III 
Test voltage
0.3 kV

Connection data

Type of connection
PUSH IN 
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.6 Nm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
2.5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 14 
Wire cross-section, solid, min.
0.2 mm²
Wire cross-section, solid, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
0.2 mm²
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.2 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²

Part description

Product description
The devices of the ACT20P-UI-2RCO-XX-x family record current, voltage, potentiometer and temperature sensor signals (mA, A, mV, V, potentiometer, RTD and TC). They have two independent relay outputs which emit an alarm when levels exceed or fall below pre-set limits.

Properties

  • Configuration and diagnosis with the FDT/DTM software “WI-Manager”.
  • Manual configuration on the device is performed via the LED display by means of operating buttons and rotary encoders.
  • The dual-channel trip amplifier enables various alarm functions: window alarm, alarm delay, wire break detection, hysteresis and upper / lower limit alarm.
  • The active or passive signal inputs for RTD, TC, potentiometer, voltage and current are fully galvanically isolated.
  • Remote diagnosis: reporting of errors (e.g. cable breaks) via status relay.
  • Operational status and relay status indicated by front panel LEDs.
  • Galvanic 4-way isolation between input, output and supply.
 

Classifications

ETIM 8.0
EC002654 
ETIM 9.0
EC002654 
ETIM 10.0
EC002654 
ECLASS 14.0
27-21-01-22 
ECLASS 15.0
27-21-01-22