DRIKITP 24VAC 1CO LD/PB
Product image
Similar to illustration
DRIKITP 24VAC 1CO LD/PB
Wiring diagram
DRIKITP 24VAC 1CO LD/PB
Graph
DC load limit curve
Resistive load
DRIKITP 24VAC 1CO LD/PB
Graph
Electrical service life
DRIKITP 24VAC 1CO LD/PB
Graph
AC operational voltage range
DRIKITP 24VAC 1CO LD/PB
Dimensional drawing
Relay in combination with base
DRIKITP 24VAC 1CO LD/PB
Miscellaneous
Type codes

DRIKITP 24VAC 1CO LD/PB

D-SERIES DRI, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 24 V AC, Continuous current: 10 A, PUSH IN, Test button available: Yes

№ продукта 2576250000
Открыть в конфигураторе
Загрузить спецификации Engineering-support Produktdownloads
Tilbehør 9 Enkeltdele 3 Anvendte produkter 8
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/5855f480-81e6-48e1-aa53-1e87419df7ba/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
D-SERIES DRI, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 24 V AC, Continuous current: 10 A, PUSH IN, Test button available: Yes 
Order No.
2576250000 
Type
DRIKITP 24VAC 1CO LD/PB 
GTIN (EAN)
4050118586015 
Qty.
10 Styk

Dimensions and weights

Depth
63 mm
Depth (inches)
2,48 inch
Height
102,1 mm
Height (inches)
4,02 inch
Width
15,9 mm
Breite (inch)
0,626 inch
Net weight
56,288 g

Temperatures

Storage temperature
-40 °C...85 °C 
Ambient temperature
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Control side

Rated control voltage
24 V AC 
Rated current AC
50 mA 
Power rating
1.2 VA 
Coil resistance
240 Ω ± 10 % 
Status indicator
red LED 

Load side

Nennschaltspannung
250 V AC 
Continuous current
10 A 
Max. četnost spínání při jmenovité zátěži
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
10 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
AC switching capacity (resistive), max.
2500 VA 
DC switching capacity (resistive), max.
240 W @ 24 V 
Switch-on delay
≤ 15 ms 
Switch-off delay
≤ 10 ms 
Contact type
1 CO contact (AgSnO) 
Mechanical service life
10 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
Yes 
Version of test button
Lockable test button 
Momentary test button 
Mechanical switch position indicator
No 
Colour
black 
UL94 éghetőségi osztály, alkatrész
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Pusher
  • UL94 flammability rating:
    HB
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB

Insulation coordination

Rated voltage
300 V
Pollution severity
2 
Surge voltage category
III 
Insulating material group
IIIb 
Uvolnění a povrchové vzdálenosti, kontrolní strana - strana zátěže
≥ 3 mm 
Dielectric strength for control side - load side
5 kVeff / 1min 
Dielectric strength of open contact
1 kVeff / 1 min 
Impulse withstand voltage
5 kV (1.2/50 µs) 
Impulse withstand voltage at neighbouring contacts
4.8 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Certificate no. (cURus) base
E312083 

Connection data

Wire connection method
PUSH IN 
Stripping length, rated connection
10 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,14 mm²
Rögzítési tartomány, névleges csatlakozás, max.
1,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 16 
Sezione di collegamento cavo, rigido, min.
0,14 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire connection cross section, finely stranded, min.
0,14 mm²
Wire connection cross section, finely stranded, max.
1,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,14 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,14 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5 mm²
Wielkość ostrza
0.4 x 2.5 mm 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01