DRIKITP 24VDC 1CO LD/PB
Product image
Similar to illustration
DRIKITP 24VDC 1CO LD/PB
Wiring diagram
DRIKITP 24VDC 1CO LD/PB
Graph
DC load limit curve
Resistive load
DRIKITP 24VDC 1CO LD/PB
Graph
Electrical service life
DRIKITP 24VDC 1CO LD/PB
Graph
DC operational voltage range
DRIKITP 24VDC 1CO LD/PB
Dimensional drawing
Relay in combination with base
DRIKITP 24VDC 1CO LD/PB
Miscellaneous
Type codes

DRIKITP 24VDC 1CO LD/PB

D-SERIES DRI, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 24 V DC, Continuous current: 10 A, PUSH IN, Test button available: Yes

Item No. 2576210000
Open in Configurator
Download data sheet Engineering Support Product Downloads
Lisävarusteet 12 Yksittäiset osat 3 Samankaltaiset tuotteet 8
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Informations suplémentaires sur les agréments / standards Connection data Classifications

Approvals

Agréments
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
D-SERIES DRI, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 24 V DC, Continuous current: 10 A, PUSH IN, Test button available: Yes 
Référence
2576210000 
Type
DRIKITP 24VDC 1CO LD/PB 
GTIN (EAN)
4050118585971 
Qty.
10 items

Dimensions and weights

Mélység
63 mm
Depth (inches)
2,48 inch
Magasság
102,1 mm
Height (inches)
4,02 inch
Szélesség
15,9 mm
Width (inches)
0,626 inch
Net weight
56,241 g

Temperatures

Tárolási hőmérséklet
-40 °C...85 °C 
Ambient temperature
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS megfelelőségi állapot
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Control side

Rated control voltage
24 V DC 
Rated current DC
21,8 mA 
Power rating
530 mW 
Coil resistance
1100 Ω ± 10 % 
Status indicator
LED verte 
Circuito di protezione
환류 다이오드 

Load side

Rated switching voltage
250 V AC 
Continuous current
10 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
10 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
AC switching capacity (resistive), max.
2500 VA 
DC switching capacity (resistive), max.
240 W @ 24 V 
Switch-on delay
≤ 15 ms 
Switch-off delay
≤ 10 ms 
Contact type
1 CO contact (AgSnO) 
Mechanical service life
10 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
Yes 
Version of test button
Lockable test button 
Momentary test button 
Механический индикатор положения переключателя
No 
Colour
black 
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Pusher
  • UL94 flammability rating:
    HB
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB

Insulation coordination

Névleges feszültség
300 V
Grado di lordura
2 
Категория перенапряжения
III 
Insulating material group
IIIb 
Clearance and creepage distances for control side - load side
≥ 3 mm 
Dielectric strength for control side - load side
5 kVeff / 1min 
Dielectric strength of open contact
1 kVeff / 1 min 
Stöthållspänning
5 kV (1.2/50 µs) 
Protection degree
IP20 
Resistenza alla tensione impulsiva nei contatti vicini
4.8 kV (1.2/50 µs) 

Informations suplémentaires sur les agréments / standards

Tanúsítványszám (cURus) relé
E312083 
Certificate no. (cURus) base
E312083 

Connection data

Technique de raccordement de conducteurs
PUSH IN 
Longueur de dénudage, raccordement nominal
10 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,14 mm²
1,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 16 
Wire cross-section, solid, min.
0,14 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire connection cross section, finely stranded, min.
0,14 mm²
Wire connection cross section, finely stranded, max.
1,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,14 mm²
Leiteranschlussquerschnitt, feindrähtig AEH mit Kunststoffkragen DIN 46228/4, max.
1 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,14 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5 mm²
Blade size
0,4 x 2,5 mm 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01