LLFS 7.50/05/180V 5.0SN BK BX SO
Product image
LLFS 7.50/05/180V 5.0SN BK BX SO
Product image
LLFS 7.50/05/180V 5.0SN BK BX SO
Dimensional drawing
LLFS 7.50/05/180V 5.0SN BK BX SO
Derating curve
LLFS 7.50/05/180V 5.0SN BK BX SO
Derating curve
LLFS 7.50/05/180V 5.0SN BK BX SO
Product benefits
Power up to UL 600 V
Offset solder pins
LLFS 7.50/05/180V 5.0SN BK BX SO
Product benefits
Tool-free wiring
Top contact security

LLFS 7.50/05/180V 5.0SN BK BX SO

Клемма печатной платы, 7.50 mm, Количество полюсов: 5, 180°, Длина штифта для припайки (l): 5 mm, луженые, черный, PUSH IN без исполнительного устройства, Диапазон зажима, макс. : 6 mm², Ящик

Ürün No. 2891920000
Veri sayfasını indir Mühendislik desteği Ürün İndirmleri
Aksesuarlar 2 İlgili ürünler 12
Approvals Основные данные для заказа Wymiary i masa Zgodność produktu z wymogami środowiska naturalnego Parametry systemu Dane materiałowe Przewody pasujące do złącza Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Opakowanie Type tests Important note Classifications

Approvals

ROHS
Conform 

Основные данные для заказа

Version
Клемма печатной платы, 7.50 mm, Количество полюсов: 5, 180°, Длина штифта для припайки (l): 5 mm, луженые, черный, PUSH IN без исполнительного устройства, Диапазон зажима, макс. : 6 mm², Ящик 
Order No.
2891920000 
Type
LLFS 7.50/05/180V 5.0SN BK BX SO 
GTIN (EAN)
4064675881490 
Qty.
50 adet
Product data
IEC: 1000 V / 41 A / 0.5 - 6 mm²
UL: 600 V / 37 A / AWG 24 - AWG 8 
Packaging
Box 

Wymiary i masa

Depth
18,5 mm
Profondeur (pouces)
0,728 inch
Height
29,15 mm
Height (inches)
1,148 inch
Height of lowest version
24,15 mm
Width
46,8 mm
Width (inches)
1,843 inch
Net weight
18,058 g

Zgodność produktu z wymogami środowiska naturalnego

RoHS Compliance Status
Zgodne, bez wyłączenia 
REACH SVHC
No SVHC above 0.1 wt% 

Parametry systemu

Product family
OMNIMATE Power - seria LL 
Wire connection method
PUSH IN without actuator 
Mounting onto the PCB
THT solder connection 
Conductor outlet direction
180° 
Pitch in mm (P)
7,5 mm
Pitch in inches (P)
0,295 "
Number of poles
5 
Pin series quantity
1 
Fitted by customer
No 
Number of rows
1 
Solder pin length (l)
5 mm
Solder pin dimensions
d = 1.5 mm 
Solder eyelet hole diameter (D)
2 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 

Dane materiałowe

Insulating material
Wemid (PA) 
Colour
svart 
Éléments d'actionnement de couleurs
orange 
Colour chart (similar)
RAL 9011 
Insulating material group
I 
UL 94 flammability rating
V-0 
Contact material
Cu-alloy 
Contact surface
tinned 
Layer structure of solder connection
4...10 µm Sn matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-40 °C
Operating temperature, max.
120 °C

Przewody pasujące do złącza

Clamping range, min.
0,25 mm²
Clamping range, max.
6 mm²
Solid, min. H05(07) V-U
0,5 mm²
Solid, max. H05(07) V-U
6 mm²
Stranded, min. H07V-R
0,5 mm²
feindrähtig, min. H05(07) V-K
0,5 mm²
Flexible, max. H05(07) V-K
6 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,25 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
6 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0,25 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
6 mm²
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      1076980000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        15 mm
    • Recommended wire-end ferrule:
      9025930000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        15 mm
    • Recommended wire-end ferrule:
      9019140000
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9004060000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      9025910000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      9019170000
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0186100000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      4 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0244100000
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      9019200000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      6 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      0533500000
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0191900000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60947-7-4 
Rated current, min. number of poles (Tu=20°C)
41 A
Rated current, max. number of poles (Tu=20°C)
32 A
Rated current, min. number of poles (Tu=40°C)
38 A
Bemessungsstrom, max. Polzahl (Tu=40°C)
28 A
Rated voltage for surge voltage class / pollution degree II/2
1.000 V
Rated voltage for surge voltage class / pollution degree III/2
1.000 V
Rated voltage for surge voltage class / pollution degree III/3
1.000 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
8 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
8 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
8 kV

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
600 V
Rated voltage (Use group C / CSA)
600 V
Rated voltage (Use group D / CSA)
600 V
Rated current (Use group B / CSA)
37 A
Rated current (Use group C / CSA)
37 A
Rated current (Use group D / CSA)
5 A

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
600 V
Rated voltage (Use group C / UL 1059)
600 V
Rated voltage (Use group D / UL 1059)
600 V
Rated current (Use group B / UL 1059)
37 A
Rated current (Use group C / UL 1059)
37 A
Rated current (Use group D / UL 1059)
5 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 8 

Opakowanie

Packaging
skrzynia 
VPE length
220 mm
VPE width
210 mm
VPE height
49 mm

Type tests

Test: Durability of markings
  • Standard:
    IEC 60947-7-4 section 7.1.4 / 08.13
  • Test:
    mark of origin, type identification, type of material, pitch, durability, stripping length
  • Evaluation:
    available
Test: Clampable cross section
  • Standard:
    IEC 60999-1 section 7 and 9.1 / 11.99, IEC 60947-1 section 8.2.4.5.1 / 03.11
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      solid 6 mm²
    • Type of conductor and conductor cross-section:
      stranded 6 mm²
    • Type of conductor and conductor cross-section:
      AWG 24/19
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 10/1
    • Type of conductor and conductor cross-section:
      AWG 10/19
    • Type of conductor and conductor cross-section:
      H07V-K10
  • Evaluation:
    passed
Test for damage to and accidental loosening of conductors
  • Standard:
    IEC 60999-1 section 9.4 / 11.99, IEC 60999-1 section 9.5 / 11.99
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-K0.5
    • Type of conductor and conductor cross-section:
      H05V-U0.5
  • Evaluation:
    passed
  • Requirement:
    0,4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K1
    • Type of conductor and conductor cross-section:
      H07V-U1
  • Evaluation:
    passed
  • Requirement:
    0.7 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K2.5
    • Type of conductor and conductor cross-section:
      H07V-U2.5
  • Evaluation:
    passed
  • Requirement:
    0.9 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K4
    • Type of conductor and conductor cross-section:
      H07V-U4.0
  • Evaluation:
    passed
  • Requirement:
    1.4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K6
    • Type of conductor and conductor cross-section:
      H07V-U6
  • Evaluation:
    passed
Pull-out test
  • Standard:
    DIN EN 60999-1 section 9.5 / 12.00
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-K0.5
    • Type of conductor and conductor cross-section:
      H05V-U0.5
  • Evaluation:
    passed
  • Requirement:
    ≥50 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K2.5
    • Type of conductor and conductor cross-section:
      H07V-U2.5
  • Evaluation:
    passed
  • Requirement:
    ≥60 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K4
    • Type of conductor and conductor cross-section:
      H07V-U4.0
  • Evaluation:
    passed
  • Requirement:
    ≥80 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K6
    • Type of conductor and conductor cross-section:
      H07V-U6
  • Evaluation:
    passed
  • Requirement:
    ≥35 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K1
    • Type of conductor and conductor cross-section:
      H07V-U1
  • Evaluation:
    passed

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • The test point can only be used as potential-pickup point.
  • The single-position PCB terminal block can be used for voltages up to 1500 V (DC) and 1000 V (AC). The relevant device standard and the appropriate required clearances and creepage distances should be observed in the application
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01