PCB端子PM 5.00/04/90 3.5SN BK BX
产品图片
PCB端子PM 5.00/04/90 3.5SN BK BX
产品图片
PCB端子PM 5.00/04/90 3.5SN BK BX
Dimensional drawing
PCB端子PM 5.00/04/90 3.5SN BK BX
Graph
PCB端子PM 5.00/04/90 3.5SN BK BX
Graph

PCB端子PM 5.00/04/90 3.5SN BK BX

Клемма печатной платы, 5.00 mm, 90°, Длина штифта для припайки (l): 3.5 mm, луженые, черный, Пружинное соединение, Диапазон зажима, макс. : 2.5 mm², Ящик

Ürün No. 7940008066
Veri sayfasını indir Ürün İndirmleri Mühendislik desteği
Aksesuarlar 1 İlgili ürünler 17
Approvals Основные данные для заказа Размеры и массы Termékek környezetvédelmi megfelelősége System parameters Material data Przewody pasujące do złącza Datos nominales conformes a IEC Rated data acc. to CSA Rated data acc. to UL 1059 Opakowanie Type tests 重要注意事项 Классификации

Approvals

认证
![](https://assets.dam.weidmueller.com/assets/api/33feeb02-46e9-4a14-9d79-8ec5ee409fe3/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
cURus 证书号
E60693 

Основные данные для заказа

版本
Клемма печатной платы, 5.00 mm, 90°, Длина штифта для припайки (l): 3.5 mm, луженые, черный, Пружинное соединение, Диапазон зажима, макс. : 2.5 mm², Ящик 
订货号
7940008066 
类型
PM 5.00/04/90 3.5SN BK BX 
GTIN (EAN)
4050118131505 
数量
100 adet
Product data
IEC: 600 V / 24 A / 0.13 - 2.5 mm²
UL: 300 V / 15 A / AWG 26 - AWG 14 
Packaging
Box 

Размеры и массы

深
8 mm
Hloubka (v palcích)
0.315 inch
高度
13.5 mm
Height (inches)
0.531 inch
Высота, мин.
10 mm
宽度
20.6 mm
Width (inches)
0.811 inch
净重
3.44 g

Termékek környezetvédelmi megfelelősége

RoHS 合规状态
Conforme avec exemption 
RoHS 豁免（如适用/已知）
6c 
REACH SVHC
Lead 7439-92-1 
SCIP
c2abd024-c370-41bc-90fc-5ba34b090103 

System parameters

产品系列
OMNIMATE Signal - seria PM 
导线连接方式
Pressure clamp connection 
安装在印刷线路板上
THT solder connection 
导线出线方向
90° 
间距 P（单位：mm）
5 mm
间距 P（单位：inch）
0.197 "
由客户装配
Yes 
Number of rows
1 
每排最大邻近回路数
24 
焊脚长度 (l)
3.5 mm
焊针规格
d = 1.0 mm 
焊接孔直径 (D)
1.3 mm
焊接孔直径公差 (D)
+ 0,1 mm 
每回路的焊脚数目
1 
直杆螺丝刀口尺寸
0.6 x 3.5 
Screwdriver blade standard
DIN 5264 
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.5 Nm
Clamping screw
M 2.5 
Stripping length
6 mm
L1 in mm
15 mm
L1 in inches
0.591 "
Touch-safe protection acc. to DIN VDE 0470
IP 20, above the PCB; with conductor connected 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 

Material data

绝缘材料
Wemid (PA) 
颜色编码
nero 
比色表 (相似)
RAL 9011 
绝缘材料组
I 
相比漏电起痕指数（CTI）
≥ 600 
UL 94 flammability rating
V-0 
触点材料
Cu-alloy 
插针镀层
tinned 
涂层
1-3 μm Ni 
4-6 μm SN 
镀锡类型
matt 
焊接连接的焊层结构
1.5...3.5 µm Ni / 4...6 µm Sn matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C

Przewody pasujące do złącza

压接范围，最小
0.13 mm²
压接范围，最大
2.5 mm²
导线最小压接面积 AWG
AWG 26 
导线最大压接面积 AWG
AWG 14 
单股导线的，最小值 H05(07) V-U
0.13 mm²
单股导线的，最大值 H05(07) V-U
2.5 mm²
软导线，最小压接面积 H05(07) V-K
0.13 mm²
软导线，最大压接面积 H05(07) V-K
2.5 mm²
最小压接面积 带预绝缘管状端头(DIN 46 228/4)
0.25 mm²
最大压接面积 带预绝缘管状端头(DIN 46 228/4)
1.5 mm²
带导线管状端头，DIN 46228 部分 1，最小
0.25 mm²
最大压接面积 带管状端头，符合DIN46 228/ 1
1.5 mm²
可压接导线
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0.5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409500000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0.75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409600000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409700000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0372600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0.25 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      9025740000
    • Stripping length:
      • nominal:
        5 mm
    • Recommended wire-end ferrule:
      9018910000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0.34 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      9025750000
参考文本
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Datos nominales conformes a IEC

testado según la norma
IEC 60664-1 
IEC 61984 
额定电流，最小回路数 (Tu = 20°C)
24 A
额定电流，最大回路数 (Tu = 20°C)
24 A
额定电流，最小回路数 (Tu = 40°C)
24 A
额定电流，最大回路数 (Tu = 40°C)
24 A
额定电压值（过电压等级II/污染等级2）
600 V
额定电压值（过电压等级III/污染等级2）
250 V
额定电压值（过电压等级III/污染等级3）
250 V
额定冲击电压（过压等级 II/污染等级2）
4 kV
额定冲击电压（过压等级III/污染等级2）
4 kV
额定冲击电压（过压等级III/污染等级3）
4 kV
瞬时耐电流
3 x 1s with 120 A 

Rated data acc. to CSA

额定电压 (使用组 B / CSA)
300 V
额定电压 (使用组 D / CSA)
300 V
额定电流 (使用组 B / CSA)
15 A
额定电流 (使用组 D / CSA)
10 A
导线最小压接面积，AWG,
AWG 26 
导线最大压接面积，AWG
AWG 14 

Rated data acc. to UL 1059

机构
CURUS 
cURus 证书号
E60693 
额定电压 (使用组 B / UL 1059)
300 V
额定电压 (使用组 D / UL 1059)
300 V
额定电流 (使用组 B / UL 1059)
15 A
额定电流 (使用组 D / UL 1059)
10 A
导线最小压接面积，AWG
AWG 26 
导线最大压接面积，AWG
AWG 14 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Opakowanie

包装
skrzynia 
VPE 长度
150 mm
VPE 宽度
90 mm
VPE 高度
45 mm

Type tests

测试标识的耐久性
  • Test:
    mark of origin, type identification, pitch, type of material, approval marking UL, approval marking CSA, durability
  • Evaluation:
    elérhető
测试 可夹紧 截面积
  • Standard:
    DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.14 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.14 mm²
    • Type of conductor and conductor cross-section:
      solid 2.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 2.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 26/1
    • Type of conductor and conductor cross-section:
      AWG 26/19
    • Type of conductor and conductor cross-section:
      AWG 14/1
    • Type of conductor and conductor cross-section:
      AWG 14/19
  • Evaluation:
    passed
导体损坏和意外松动测试
  • Standard:
    DIN EN 60999-1 section 9.4 / 12.00
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      AWG 26/1
    • Type of conductor and conductor cross-section:
      AWG 26/19
  • Evaluation:
    passed
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
  • Evaluation:
    passed
  • Requirement:
    0.7 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 2.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 2.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 14/1
    • Type of conductor and conductor cross-section:
      AWG 14/19
  • Evaluation:
    passed
拉出测试
  • Standard:
    DIN EN 60999-1 section 9.5 / 12.00
  • Requirement:
    ≥10 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      AWG 26/1
    • Type of conductor and conductor cross-section:
      AWG 26/19
  • Evaluation:
    passed
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    ≥50 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U2.5
    • Type of conductor and conductor cross-section:
      H07V-K2.5
    • Type of conductor and conductor cross-section:
      AWG 14/1
    • Type of conductor and conductor cross-section:
      AWG 14/19
  • Evaluation:
    passed

重要注意事项

IPC 标准的符合性
符合性：该产品根据国际认可的标准进行开发、生产和交付，符合数据页中确保的特性，装饰性特性满足 IPC-A-610 “等级 2”。其他针对产品的权利主张可以应要求进行评估。 
备注

• 额定电流大小与额定截面积和产品的位数有关系
• 针对裸端头
• 针对带护套的管状端头
• 根据与 cUL 批准有关的 CSA 认证提供的数据 - E60693
• 图示中P = 间距
• 该额定数据只适用于产品本身。对电气间隙和爬电距离的设定符合相关行业的应用标准。
• 产品在平均温度 50 °C 和最大湿度 70% 的条件下长期储存 36 个月 

Классификации

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01