SPE P20 R1H 2.1 6 YG/YG TU

SPE P20 R1H 2.1 6 YG/YG TU

Tämä tuote ei ole vielä saatavana .

, SPE (Single Pair Ethernet), Clip-on flange, THT/THR solder connection, 1.80 mm, Number of poles: 2, 90°, Solder pin length (l): 2.1 mm, Ni/Au, black, Tape

Tuotteen tunnus 3150590000
Lataa tietosivu
Samankaltaiset tuotteet 12
General ordering data Dimensions and weights System specifications Electrical properties Standards Material data Packing Classifications

General ordering data

Version
, SPE (Single Pair Ethernet), Clip-on flange, THT/THR solder connection, 1.80 mm, Number of poles: 2, 90°, Solder pin length (l): 2.1 mm, Ni/Au, black, Tape 
Order No.
3150590000 
Type
SPE P20 R1H 2.1 6 YG/YG TU 
GTIN (EAN)
4099987609883 
Qty.
100 items
Packaging
Tape 

Dimensions and weights

Depth
19,9 mm
Depth (inches)
0,783 inch
Height
10,9 mm
Height (inches)
0,429 inch
Width
7,52 mm
Width (inches)
0,296 inch
Net weight
3 g

System specifications

Category
T1-B 
LED
Yes 
Mounting onto the PCB
THT/THR solder connection 
Number of poles
2 
Outgoing elbow
90° 
Performance-Category
T1-B 10/100 MBit/s, 1000 MBit/s, 10/100/1000 MBit/s 
Pitch in inches (P)
0,071 "
Pitch in mm (P)
1,8 mm
Plugging cycles
750 
Protection degree
IP20 
Shield surface
tinned 
Shielding
Yes 
Shielding material
CuSn 
Side termination, characteristic
Clip-on flange 
Solder pin dimensions
Octagonal 
Solder pin length (l)
2,1 mm
Soldering process
Reflow soldering 
Manual soldering 
Wave soldering 
Transmission rate
10/100 MBit/s 
1000 MBit/s 
10/100/1000 MBit/s 
Type of connection
Solder connection 

Electrical properties

Dielectric strength, contact / contact
1000 V DC 
Dielectric strength, contact / shield
2250 V DC 
Insulation resistance
≥ 500 MΩ 
Nominal voltage
72 V
PoE / PoE+
PoDL acc. to IEEE 802.3bu / cg 

Standards

Connector standard
IEC 63171-2 

Material data

Insulating material
LCP 
Colour
black 
Colour chart (similar)
RAL 9011 
Insulation resistance
≥ 500 MΩ 
Moisture Level (MSL)
1 
UL 94 flammability rating
V-0 
Contact base material
CuMg 
Contact material
Cu-alloy 
Contact surface
Ni/Au 
Layer structure of solder connection
2...4 µm Ni / ≥ 0.25 µm Au 
Operating temperature, min.
−40 °C
Operating temperature, max.
85 °C

Packing

Packaging
Tape 
VPE length
0 mm
VPE width
0 mm
VPE height
0 mm

Classifications

ETIM 6.0
EC002637 
ETIM 7.0
EC002637 
ETIM 8.0
EC002637 
ETIM 9.0
EC002637 
ETIM 10.0
EC002637 
ECLASS 9.1
27-44-04-02 
ECLASS 10.0
27-44-04-02 
ECLASS 11.0
27-46-02-01 
ECLASS 12.0
27-46-02-01 
ECLASS 13.0
27-46-02-01 
ECLASS 14.0
27-46-02-01 
ECLASS 15.0
27-46-02-01