TRPL 24VDC 1CO AU TRAK
Similar to illustration
TRPL 24VDC 1CO AU TRAK
Similar to illustration
TRPL 24VDC 1CO AU TRAK
Wiring diagram
TRPL 24VDC 1CO AU TRAK
Graph
DC load limit curve
Resistive load
TRPL 24VDC 1CO AU TRAK
Dimensional drawing
TRPL 24VDC 1CO AU TRAK
Miscellaneous
Type codes

TRPL 24VDC 1CO AU TRAK

TERMSERIES-compact, Relay module, Number of contacts: 1, CO contact Au (Gold), AgSnO2, Rated control voltage: 24 V DC +25 % / -30 %, Continuous current: 6 A, PUSH IN, Test button available: No

Tuotteen tunnus 2773900000
Avaa konfiguraattorissa
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 27 Samankaltaiset tuotteet 4
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Connection data Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 

General ordering data

Version
TERMSERIES-compact, Relay module, Number of contacts: 1, CO contact Au (Gold), AgSnO2, Rated control voltage: 24 V DC +25 % / -30 %, Continuous current: 6 A, PUSH IN, Test button available: No 
Order No.
2773900000 
Type
TRPL 24VDC 1CO AU TRAK 
GTIN (EAN)
4064675037675 
Qty.
10 items

Dimensions and weights

Depth
62,5 mm
Depth (inches)
2,461 inch
Height
89,4 mm
Height (inches)
3,52 inch
Width
6,4 mm
Ширина (в дюймах)
0,252 inch
순중량
25 g

Temperatures

Storage temperature
-40 °C...85 °C 
Ambient temperature
-40 °C…70 °C 
Humidity
95 % for 30 days, minimal condensation to EN 50155 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
75e5f661-708e-44b0-9fc2-4f6c675b3b71 

Control side

Rated control voltage
24 V DC +25 % / -30 % 
Rated current DC
16 mA 
Potencia nominal
384 mW 
Coil resistance
3390 Ω ± 10 % 
Status indicator
Green LED 
Protective circuit
Free-wheeling diode 
Suppressor diode 

Load side

Tension de commutation nominale
250 V AC 
Corrente permanente
6 A 
Макс. частота коммутации при номинальной нагрузке
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
50 mW 
Bekapcsolási áram
20 A / 20 ms 
AC switching capacity (resistive), max.
1500 VA 
DC switching capacity (resistive), max.
144 W @ 24 V 
켜기 지연
5.6 ms 
끄기 지연
21.4 ms 
Contact type
1 CO contact (Au (Gold), AgSnO2) 
Mechanical service life
10 x 106 switching cycles 

General data

Provozní nadmořská výška
≤ 2000 m 
above sea level 
Version
for railway applications 
Mounting rail
TS 35 
Tasto di prova disponibile
No 
Mechanical switch position indicator
No 
Colour
black 
UL 94 flammability rating
V-0 
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-0
  • Component:
    Relay status indicator
  • UL94 flammability rating:
    V-0
  • Component:
    Pusher
  • UL94 flammability rating:
    V-0

Insulation coordination

Rated voltage
300 V
Pollution severity
2 
Surge voltage category
III 
Clearance and creepage distances for control side - load side
≥ 6 mm 
제어 측면 - 부하 측면에 대한 절연 강도
4 kVeff / 1 Min. 
Type of isolation at input and output
reinforced insulation 
Dielectric strength of open contact
1 kVeff / 1 min 
Dielectric strength to mounting rail
4 kVeff / 1 Min. 
Impulse withstand voltage
6 kV (1.2/50 µs) 
Protection degree
IP20 

Connection data

Wire connection method
PUSH IN 
Stripping length, rated connection
9 mm
Anslutningsområde, märkarea
1,5 mm²
Clamping range, min.
0,14 mm²
2,5 mm²
przekrój przyłącza przewodu AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 14 
Wire cross-section, solid, min.
0,5 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire cross-section, solid, min. (AWG)
AWG 26 
Wire cross-section, solid, max. (AWG)
AWG 14 
Wire connection cross section, finely stranded, min.
0,35 mm²
Wire connection cross section, finely stranded, max.
2,5 mm²
Wire cross-section, finely stranded, min. (AWG)
AWG 26 
Wire cross-section, finely stranded, max. (AWG)
AWG 14 
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,14 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5 mm²
Blade size
0.6 x 3.5 mm 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01