TS 35X15/LL 2M/ST/SZ
Product image
Similar to illustration
TS 35X15/LL 2M/ST/SZ
Product image
Similar to illustration
TS 35X15/LL 2M/ST/SZ

TS 35X15/LL 2M/ST/SZ

Guida di supporto, Accessori, acciaio, zincato glavanicamente e passivato, Larghezza: 2000 mm, Posizione verticale: 35 mm, Profondità: 15 mm

Produkt ID 7907490000
Åbn i konfiguratoren
Download datablad Engineering Support Product Downloads
Tilbehør 20 Er tilbehør til 19 Anvendte produkter 19
Approvals Dati generali per l’ordinazione Dimensiones y pesos Temperaturer Termékek környezetvédelmi megfelelősége Mounting rail Note importante Classifications

Approvals

ROHS
Conform 

Dati generali per l’ordinazione

Version
Guida di supporto, Accessori, acciaio, zincato glavanicamente e passivato, Larghezza: 2000 mm, Posizione verticale: 35 mm, Profondità: 15 mm 
Order No.
7907490000 
Type
TS 35X15/LL 2M/ST/SZ 
GTIN (EAN)
4032248296262 
Qty.
20 

Dimensiones y pesos

Depth
15 mm
Depth (inches)
0,591 inch
Height
35 mm
Height (inches)
1,378 inch
Width
2.000 mm
Width (inches)
78,74 inch
Net weight
611,111 g

Temperaturer

Ambient temperature
-5 °C…40 °C 

Termékek környezetvédelmi megfelelősége

RoHS Compliance Status
Megfelel, kivétel nélkül 
REACH SVHC
No SVHC above 0.1 wt% 

Mounting rail

Basic material
Steel 
Drill-hole diameter
5,2 mm
Installation advice
Direct mounting 
Length of the terminal rail
  • min.:
    0 mm
  • nominal:
    2.000 mm
  • max.:
    2.000 mm
Pre-punched mounting rail
Yes 
Short circuit strength corresponds to E-Cu wire
50 mm²
Short-time withstand current per second according to IEC 60947-7-2
6 kA
Slit gap
11 mm
Slit gap
  • min.:
    11 mm
  • nominal:
    11 mm
  • max.:
    11 mm
Slit length
25 mm
Slit length
  • min.:
    25 mm
  • nominal:
    25 mm
  • max.:
    25 mm
Slit width
5,2 mm
Slit width
  • min.:
    5,2 mm
  • nominal:
    5,2 mm
  • max.:
    5,2 mm
Slotted drill holes
Yes 
Solder eyelet hole diameter (D)
5,2 mm
Spacing of holes, centre-to-centre
36 mm
Standards
V souladu s DIN EN 60715 
Surface finish
galvanic zinc plated and passivated 
Thickness
1,5 mm

Note importante

Product information
Les rails profilés avec traitement Sendzimier ont une résistance à la corrosion limitée sur les bords extérieurs et coupés 

Classifications

ETIM 8.0
EC001285 
ETIM 9.0
EC001285 
ETIM 10.0
EC001285 
ECLASS 14.0
27-40-06-02 
ECLASS 15.0
27-40-06-02