TS 35X7.5/5X18 2M/ST/SZ
Product image
Similar to illustration
TS 35X7.5/5X18 2M/ST/SZ
Product image
Similar to illustration
TS 35X7.5/5X18 2M/ST/SZ

TS 35X7.5/5X18 2M/ST/SZ

Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 7.5 mm

Tuotteen tunnus 1879090000
Avaa konfiguraattorissa
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 20 Samankaltaiset tuotteet 19
Dopuszczenia General ordering data Abmessungen und Gewichte Temperatures Environmental Product Compliance Mounting rail Important note Classifications

Dopuszczenia

ROHS
Соответствовать 

General ordering data

Version
Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 7.5 mm 
Order No.
1879090000 
Type
TS 35X7.5/5X18 2M/ST/SZ 
GTIN (EAN)
4032248473786 
Qty.
40 

Abmessungen und Gewichte

Djup
7,5 mm
Depth (inches)
0,295 inch
Height
35 mm
Altura (pulgadas)
1,378 inch
Width
2 000 mm
Byggbredd (tum)
78,74 inch
Net weight
264,815 g

Temperatures

Ambient temperature
-5 °C…40 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
Bez SVHC powyżej 0,1 wt% 

Mounting rail

Basic material
Steel 
Drill-hole diameter
5,2 mm
Installation advice
Direct mounting 
Length of the terminal rail
  • min.:
    0 mm
  • nominal:
    2 000 mm
  • max.:
    2 000 mm
Pre-punched mounting rail
Yes 
Short circuit strength corresponds to E-Cu wire
16 mm²
Short-time withstand current per second according to IEC 60947-7-2
1,92 kA
Slit gap
7 mm
Slit gap
  • min.:
    7 mm
  • nominal:
    7 mm
  • max.:
    7 mm
Slit length
18 mm
Slit width
5,2 mm
Slit width
  • min.:
    5 mm
  • nominal:
    5 mm
  • max.:
    5 mm
Slotted drill holes
Yes 
Solder eyelet hole diameter (D)
5,2 mm
Spacing of holes, centre-to-centre
25 mm
Standards
DIN EN 60715 
Surface finish
galvanic zinc plated and passivated 
Thickness
1 mm
Длина прорезей
  • min.:
    18 mm
  • nominal:
    18 mm
  • max.:
    18 mm

Important note

Product information
Din rails with Sendzimier treatment have limited corrosion resistance on the outer and cut edges 

Classifications

ETIM 8.0
EC001285 
ETIM 9.0
EC001285 
ETIM 10.0
EC001285 
ECLASS 14.0
27-40-06-02 
ECLASS 15.0
27-40-06-02