VPU AC I 4 275/25 LCF S
Product image
Abb.ähnlich
VPU AC I 4 275/25 LCF S
Electric symbol
Schematic circuit diagram

VPU AC I 4 275/25 LCF S

Surge voltage arrester, Low voltage, without telecomm. contact, Leakage-current-free, Surge protection, TN-C-S, TN-S

Produkt ID 2726780000
Åbn i konfiguratoren
Download datablad Engineering Support Product Downloads
Lisävarusteet 4 Varaosat 2 Samankaltaiset tuotteet 7
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Garantie Important note Classifications

Approvals

Jóváhagyások
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319263/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Változat
Surge voltage arrester, Low voltage, without telecomm. contact, Leakage-current-free, Surge protection, TN-C-S, TN-S 
Order No.
2726780000 
Type
VPU AC I 4 275/25 LCF S 
GTIN (EAN)
4050118802504 
Qty.
1 items

Dimensions and weights

Profondeur
91 mm
Depth (inches)
3,583 inch
Wysokość
90 mm
Height (inches)
3,543 inch
Width
72 mm
Width (inches)
2,835 inch
Net weight
672 g

Temperatures

Temperatura magazynowania
-40 °C...85 °C 
Ambient temperature
…85 °C 
Рабочая температура
-40 °C...85 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

Состояние соответствия RoHS
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

General data

Colour
orange 
black 
Design
Installation housing; 4TE 
Insta IP 20 
Mounting rail
TS 35 
Operating altitude
≤ 2000 m 
Optical function display
green = OK; red = arrester is defective - replace 
Protection degree
IP20 in installed state 
Segment
Power distribution 
UL 94 flammability rating
V-0 
Version
telekommunikációs érintkező nélkül 
Szivárgási áram mentes 
Túlfeszültség-védelem 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
IV 

Rated data IEC / EN

Corriente del conductor de protección IPE
1 µA
Discharge current Imax (8/20µs) wire-PE
65 kA 
Discharge current In (8/20µs) wire-PE
25 kA 
Energy coordination (≤10 m)
Type I 
Type II 
Type III 
Follow-on current extinguishing capability Ifi
50 kA 
Frequency range, max.
60 Hz
Frequency range, min.
50 Hz
Fuse protection
No Fuse neccessary ≤315 A gG 
Fusible de soporte integrado
No 
Leakage current at Un
1 µA
Lightning test current Iimp (10/350 µs) (L-PE)
25 kA
Low voltage network
TN-C-S 
TN-S 
Mains voltage
230 V / 400 V 
Max. continuous voltage, Uc (AC)
275 V 
Note follow current capability
No tripping of a 16 A gG fuse up to prospective 50 kAeff 
Number of poles
4 
Protection level Up at IN (L/N-PE)
≤ 1.5 kV 
Rated voltage (AC)
230 V
Requirements category acc. to IEC 61643-11
Type I 
Type II 
Requirements class, acc. to EN 61643-11
T1 
T2 
Response time / fallback time
<100 ns 
Short-circuit current rating ISCCR
50 kA
Signalling contact
No 
Standards
IEC 61643-11 
EN 61643-11 
Temporary surge voltage (over-voltage) - TOV
442 V
Voltage type
AC 

Connection data

Stripping length
18 mm
Wire connection method
Screw connection 
Type of connection
Screw connection 
Stripping length, rated connection
18 mm
Tightening torque, min.
3 Nm
Tightening torque, max.
4,5 Nm
Clamping range, rated connection
16 mm²
Clamping range, min.
1,5 mm²
35 mm²
Wire cross-section, solid, min.
2,5 mm²
Wire cross-section, solid, max.
35 mm²
Wire connection cross section, finely stranded, min.
2,5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
2,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
35 mm²
Connection cross-section, stranded, min.
2,5 mm²
Connection cross-section, stranded, max.
35 mm²

Electrical data

Voltage type
AC 

General data

Number of poles
4 
Protection degree
IP20 in installed state 
Colour
orange 
black 

Garantie

Time interval
5 años 

Important note

Product information
For use in DC applications, please use the fuse of SIBA Type NH2XL aR/aSF DC 1500 V 

Classifications

ETIM 8.0
EC001457 
ETIM 9.0
EC001457 
ETIM 10.0
EC001457 
ECLASS 14.0
27-17-12-04 
ECLASS 15.0
27-17-12-04