VPU AC II F 1 R 300/40
Product image
Image similar
VPU AC II F 1 R 300/40
Electric symbol
Schematic circuit diagram

VPU AC II F 1 R 300/40

Surge voltage arrester, Low voltage, Surge protection, with remote contact, Single-phase, TN

Ürün No. 2807390000
Konfigüratörde aç
Veri sayfasını indir Mühendislik desteği Ürün İndirmleri
Aksesuarlar 4 Yedek parçalar 3 İlgili ürünler 6
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Connection data, remote alert General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Guarantee Important note Classifications

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, Surge protection, with remote contact, Single-phase, TN 
Order No.
2807390000 
Type
VPU AC II F 1 R 300/40 
GTIN (EAN)
4064675275480 
Qty.
1 adet

Dimensions and weights

Depth
68 mm
Depth (inches)
2,677 inch
Depth including DIN rail
76 mm
Height
111 mm
Height (inches)
4,37 inch
Width
18 mm
Width (inches)
0,709 inch
Net weight
155 g

Temperatures

Storage temperature
-40 °C...85 °C 
Ambient temperature
-40 °C…85 °C 
Operating temperature
-40 °C...85 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Connection data, remote alert

Connection type
PUSH IN 
Cross-section for connected wire, solid core, max.
1,5 mm²
Cross-section for connected wire, solid core, min.
0,25 mm²
Stripping length
8 mm

General data

Colour
orange 
black 
Design
Installation housing; 1TE 
Insta IP 20 
Mounting rail
TS 35 
Operating altitude
≤ 4000 m 
Protection degree
IP20 in installed state 
UL 94 flammability rating
V-0 
Utförande
Surge protection 
with remote contact 
Сегмент
Power distribution 
광학 기능 디스플레이
green = OK; red = arrester is defective - replace 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
III 

Rated data IEC / EN

Combined pulse UOC
6 kV
Discharge current Imax (8/20µs) wire-PE
40 kA 
Discharge current In (8/20µs) wire-PE
20 kA 
Energy coordination (≤10 m)
Type II 
Type III 
Follow-on current extinguishing capability Ifi
Follow current need not be taken into account 
Frequency range, max.
60 Hz
Frequency range, min.
50 Hz
Integrated back-up fuse
Yes 
Leakage current at Un
0,3 mA
Low voltage network
Single-phase 
TN 
Mains voltage
230 V / 400 V 
Max. continuous voltage, Uc (AC)
300 V 
Number of poles
1 
Protection level Up at IN (L/N-PE)
≤ 1500 V 
Rated voltage (AC)
230 V
Requirements category acc. to IEC 61643-11
Type II 
Type III 
Requirements class, acc. to EN 61643-11
T2 
T3 
Response time / fallback time
≤ 25 ns 
Short-circuit current rating ISCCR
100 kA
Signalling contact
250 V 1A 1CO 
SPD type
T2 
T3 
Standards
IEC 61643-11 
EN 61643-11 
Voltage type
AC 
Защита предохранителем
Not required 
internally available 
No Fuse neccessary ≤315 A gG 
순간 서지 전압(과전압) - TOV
337 V

Connection data

탈피 길이
18 mm
와이어 결선 방식
Screw connection 
Screw connection 
Stripping length, rated connection
18 mm
Tightening torque, min.
3 Nm
Tightening torque, max.
4,5 Nm
Clamping range, rated connection
16 mm²
Clamping range, min.
1,5 mm²
Clamping range, max.
35 mm²
Wire connection cross section AWG, min.
AWG 16 
Wire connection cross section AWG, max.
AWG 2 
Wire cross-section, solid, min.
1,5 mm²
Wire cross-section, solid, max.
35 mm²
Wire connection cross section, finely stranded, min.
1,5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
2,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
25 mm²
Connection cross-section, stranded, min.
1,5 mm²
Connection cross-section, stranded, max.
35 mm²

Electrical data

Tipo di tensione
AC 

General data

극 수
1 
Protection degree
IP20 in installed state 
Colour
orange 
black 

Guarantee

Czasokres
5 years 

Important note

Product information
If F1 > 63A gG, then the integrated backup fuse always operates before F1 

Classifications

ETIM 8.0
EC000941 
ETIM 9.0
EC000941 
ETIM 10.0
EC000941 
ECLASS 14.0
27-17-12-02 
ECLASS 15.0
27-17-12-02