VPUM1I1SXFXV2O0TXPX15
VPUM1I1SXFXV2O0TXPX15
Connection diagram
VPUM1I1SXFXV2O0TXPX15
Connection diagram
VPUM1I1SXFXV2O0TXPX15
VPUM1I1SXFXV2O0TXPX15

VPUM1I1SXFXV2O0TXPX15

Surge protection, 1 MPP, Surge protection II, Cable gland, PUSH IN connection, 1500 V

Tuotteen tunnus 2755990000
Lataa tietosivu Product Downloads
Lisävarusteet 6 Vastineet 3 On vastine kohteelle 2 Samankaltaiset tuotteet 12
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Enclosure General data Inputs Surge protection DC side Important note Classifications Tender specification sheets

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
ROHS
Conform  

General ordering data

Version
Surge protection, 1 MPP, Surge protection II, Cable gland, PUSH IN connection, 1500 V  
Order No.
2755990000  
Type
VPUM1I1SXFXV2O0TXPX15  
GTIN (EAN)
4064675003359  
Qty.
1  items

Dimensions and weights

Depth
91  mm
Depth (inches)
3,583  inch
Height
145  mm
Height (inches)
5,709  inch
Width
168  mm
Width (inches)
6,614  inch
Net weight
694  g

Temperatures

Storage temperature
-40 °C...85 °C  
Ambient temperature
-40 °C…85 °C  
Operating temperature
-40 °C...85 °C  
Humidity
5 - 95% rel. humidity  

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

Enclosure

Connection type string
Internal terminal (with cable gland feed-through)  
Enclosure attachment
Via the four holes under the cover screws  

General data

Protection degree
IP67  
Standards
EN 50539-11  

Inputs

Amount of maximum power points (MPP)
1  MPP
DC Input + & -
  • Wire connection:
    • Type of connection:
      PUSH IN
  • Cable entry:
    • Number of cable entries:
      1
Functional earth connector
  • Cable entry:
    • Number of cable entries:
      1
  • Wire connection:
    • Type of connection:
      PUSH IN
Fuse type
Neither fuse cartridge nor holder  
Number of string inputs per MPP
1  

Surge protection DC side

Conditions and requirements
EN 50539-11  
Discharge current In (8/20 µs)
15 kA  
Discharge current, max. (8/20 µs)
40  kA
Operating height in the grounded PV system
≤ 4000 m  
Operating height in ungrounded PV system
≤ 4000 m  
Protection level Up (+/- , -/PE , +/PE)
≤ 4.8 kV  
PV system voltage, max. Ucpv
1 500  V
Requirements class
Type II  
Short-circuit curent ISCPV
11  kA
Standards
EN 50539-11  
Total discharge current Itotal ( 8/20µs)
50  kA

Important note

Product information
The SPD in the box cannot be replaced.  

Classifications

ETIM 7.0
EC001457  
ETIM 8.0
EC001457  
ETIM 9.0
EC001457  
ETIM 10.0
EC001457  
ECLASS 12.0
27-17-14-03  
ECLASS 13.0
27-17-14-03  
ECLASS 14.0
27-17-14-03  
ECLASS 15.0
27-17-14-03  

Tender specification sheets

Long specification
Designation 2: VPU PV BOX CG II 3 1500 1M Over voltage protection box for inverters with 1 Mpp tracker, used to protect the DC side. Max. String voltage Uoc:1500 V MPPT1: 1 input, connection via cable gland (4-8mmØ) cable cross section: max. 16mm² Connection of the box in stitch without DC switch 1 surge protection type II Connection of functional earth via cable glands (8-12mmØ) cable cross-section: 16mm² Protection class: IP65 and IP67 Plastic enclosure Dimensions HxWxD:168x145x91 mm According to standard, EN 50539-11: 2013+A1:2014 IEC 61643-31: 2018