RCMKITP-I 24VAC 4CO LD
Product image
Similar to illustration
RCMKITP-I 24VAC 4CO LD
Wiring diagram
RCMKITP-I 24VAC 4CO LD
Graph
DC load limit curve
Resistive load
RCMKITP-I 24VAC 4CO LD
Graph
Derating curve
Relay in combination with base
RCMKITP-I 24VAC 4CO LD
Graph
AC operational voltage range
RCMKITP-I 24VAC 4CO LD
Graph
Electrical service life
250 V AC resistive load
RCMKITP-I 24VAC 4CO LD
Dimensional drawing
RCMKITP-I 24VAC 4CO LD
Miscellaneous
RCMKITP-I 24VAC 4CO LD
Miscellaneous
RCMKITP-I 24VAC 4CO LD
Miscellaneous
RCMKITP-I 24VAC 4CO LD

RCMKITP-I 24VAC 4CO LD

Tämä tuote ei ole pian enää saatavana.

Available until: 31.01.2026

RIDERSERIES RCM, Reléový modul, Počet kontaktů: 4, CO contact AgNi, Jmenovité řídicí napětí: 24 V AC, Trvalý proud: 6 A, PUSH IN, Testovací tlačítko k dispozici: Ano

№ продукта 8921130000
Открыть в конфигураторе
Загрузить спецификации Engineering Support Product Downloads
Lisävarusteet 20 Yksittäiset osat 4 Samankaltaiset tuotteet 4
Approvals Všeobecné objednací údaje Dimensions and weights Temperatures Environmental Product Compliance Control side Lastseite General data Insulation coordination Further details of approvals / standards Data připojení Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319234/-S800/-T1z1mm-S80) 
ROHS
Conform 

Všeobecné objednací údaje

Version
RIDERSERIES RCM, Reléový modul, Počet kontaktů: 4, CO contact AgNi, Jmenovité řídicí napětí: 24 V AC, Trvalý proud: 6 A, PUSH IN, Testovací tlačítko k dispozici: Ano 
Order No.
8921130000 
Type
RCMKITP-I 24VAC 4CO LD 
GTIN (EAN)
4032248692347 
Qty.
10 items
Delivery status
This article will no longer be available in the future. 
Available until
31.01.2026 

Dimensions and weights

Depth
78,3 mm
Depth (inches)
3,083 inch
Height
98 mm
Height (inches)
3,858 inch
Width
28 mm
Width (inches)
1,102 inch
Net weight
108,4 g

Temperatures

Storage temperature
-40 °C...70 °C 
Ambient temperature
-40 °C…70 °C 
Humidity
40 °C / 93 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Control side

Rated control voltage
24 V AC 
Номинальный ток, AC
55 mA 
Power rating
1.32 VA 
Coil resistance
192 Ω ± 10 % 
Status indicator
red LED 

Lastseite

Rated switching voltage
240 V AC 
Continuous current
6 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Min. switching power
1 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
Inrush current
12 A / 20 ms 
AC switching capacity (resistive), max.
1500 VA 
DC switching capacity (resistive), max.
144 W @ 24 V 
Switch-on delay
≤ 15 ms 
Switch-off delay
≤ 10 ms 
Contact type
4 CO contact (AgNi) 
Mechanical service life
AC coil 20 x 106 switching cycles 
DC coil 30 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
Oui 
테스트 버튼 버전
Lockable test button 
Momentary test button 
Mechanical switch position indicator
Да 
Colour
black 

Insulation coordination

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Insulating material group
IIIa 
Clearance and creepage distances for control side - load side
≥ 4 mm 
Dielectric strength for control side - load side
2.5 kVeff / 1 Min. 
Dielectric strength of neighbouring contacts
2 kVeff / 1 min 
Dielectric strength of open contact
1.2 kVeff /1 min. 
Impulse withstand voltage
5 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (CSA) relay
249409-2426937 
Certificate no. (CSA) base
249409-2295474 
Certificate No. (DNV)
TAA000011A 
Certificate no. (cURus) relay
E522350 
Certificate no. (cURus) base
E223759 

Data připojení

Wire connection method
PUSH IN 
Stripping length, rated connection
12 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,75 mm²
1,5 mm²
Wire cross-section, solid, min.
0,75 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire cross-section, solid, max. (AWG)
AWG 16 
Wire connection cross section, finely stranded, min.
0,75 mm²
Wire connection cross section, finely stranded, max.
1,5 mm²
Wire cross-section, finely stranded, max. (AWG)
AWG 16 
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,75 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
0,75 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,75 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1 mm²
Blade size
0.6 x 3.5 mm 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01