TOPL 24VDC 230VAC0.1A

TERMSERIES-kompakt, Solid-state relä, Märkstyrspänning: 24 V DC ±20 % , Märkkopplingsspänning: 230 V AC, Varaktig ström: 0,1 A, PUSH IN

Tuotteen tunnus 2773630000

Tanúsítványok

Approvals

Allmänna beställningsdata

Version
Order No.
Type
GTIN (EAN)
Qty.

치수 및 중량

Depth
Depth (inches)
Height
Height (inches)
Width
Width (inches)
Čistá hmotnost

Temperatury

Storage temperature
Ambient temperature
Humidity

Probability of failure

MTTF

Zgodność produktu z wymogami środowiska naturalnego

RoHS Compliance Status
RoHS Exemption (if applicable/known)
REACH SVHC

제어 측

Rated control voltage
Rated current DC
Power rating
Status indicator
Protective circuit

Load side

Rated switching voltage
Continuous current
Max. switching frequency at rated load
Switch-on delay
Switch-off delay
Min. switching current
Protective circuit, load side
Contact type

General data

Operating altitude
Mounting rail
Test button available
Mechanical switch position indicator
Colour
Komponent s klasifikací hořlavosti UL 94

Insulation coordination

Pollution severity
Surge voltage category
Clearance and creepage distances for control side - load side
Dielectric strength for control side - load side
Type of isolation at input and output
Impulse withstand voltage
Protection degree

Datos de conexión

Stripping length
Wire connection method
Stripping length, rated connection
Rozsah sevření, jmenovité připojení
Clamping range, min.
Clamping range, max.
Wire connection cross section AWG, min.
Wire connection cross section AWG, max.
Průřez vodiče, pevný, min.
Wire cross-section, solid, max.
Wire cross-section, solid, min. (AWG)
Wire cross-section, solid, max. (AWG)
Wire connection cross section, finely stranded, min.
Wire connection cross section, finely stranded, max.
Wire cross-section, finely stranded, min. (AWG)
Wire cross-section, finely stranded, max. (AWG)
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
Klingenmaß

Classifications

ETIM 8.0
ETIM 9.0
ETIM 10.0
ECLASS 14.0
ECLASS 15.0