MCZ R 36VDC 1CO TRAK
Product image
Similar to illustration
MCZ R 36VDC 1CO TRAK
Product image
Similar to illustration
MCZ R 36VDC 1CO TRAK
Wiring diagram
MCZ R 36VDC 1CO TRAK
Graph
DC load limit curve
MCZ R 36VDC 1CO TRAK
Graph
Derating curve
MCZ R 36VDC 1CO TRAK
Dimensional drawing

MCZ R 36VDC 1CO TRAK

MCZ-SERIES TRAK, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 36 V DC +25 % / -30 %, Continuous current: 6 A, Tension-clamp connection, Test button available: No

Tuotteen tunnus 8713900000
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 18 Samankaltaiset tuotteet 5
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Connection data Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80)  
ROHS
Conform  

General ordering data

Version
MCZ-SERIES TRAK, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 36 V DC +25 % / -30 %, Continuous current: 6 A, Tension-clamp connection, Test button available: No  
Order No.
8713900000  
Type
MCZ R 36VDC 1CO TRAK  
GTIN (EAN)
4032248395224  
Qty.
10  items
Delivery status
This article will no longer be available in the future.  
Available until
30.10.2026  

Dimensions and weights

Depth
63,2  mm
Depth (inches)
2,488  inch
Height
91  mm
Height (inches)
3,583  inch
Width
6,1  mm
Width (inches)
0,24  inch
Net weight
27,6  g

Temperatures

Storage temperature
-40 °C...85 °C  
Ambient temperature
-25 °C…70 °C  
Humidity
95 % for 30 days, minimal condensation to EN 50155  
Note: room temperature (service)
+85 °C for 10 minutes  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7a, 7cI  
REACH SVHC
Lead 7439-92-1  
SCIP
35d83707-6a3b-45b5-b9f8-6ba8184c863e  

Control side

Rated control voltage
36 V DC +25 % / -30 %  
Rated current DC
8...12 mA  
Power rating
200...540 mW  
Status indicator
Green LED  
Protective circuit
Free-wheeling diode  
Varistor  
Reverse polarity protection  
Max. reset time after voltage interruption
10  ms

Load side

Rated switching voltage
250 V AC  
Continuous current
6 A  
Max. switching frequency at rated load
0,1  Hz
Max. switching voltage, AC
250  V
Max. switching voltage, DC
250  V
Min. switching power
100 mA @ 12 V  
Inrush current
6 A  
AC switching capacity (resistive), max.
1500 VA  
DC switching capacity (resistive), max.
120 W @ 24 V  
Switch-on delay
<6 ms  
Switch-off delay
<70 ms  
Contact type
1 CO contact (AgSnO)  
Mechanical service life
10 x 106 switching cycles  

General data

Version
for railway applications  
Mounting rail
TS 35  
Test button available
No  
Mechanical switch position indicator
No  
Open sides
right  
Colour
beige  
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-0

Insulation coordination

Rated voltage
300  V
Pollution severity
2  
Surge voltage category
III  
Clearance and creepage distances for control side - load side
≥ 5.5 mm  
Dielectric strength for control side - load side
4 kVeff / 1 s  
Dielectric strength to mounting rail
4 kVeff / 1 Min.  
Impulse withstand voltage
4 kV (1.2/50 µs)  
Protection degree
IP20  

Connection data

Wire connection method
Tension-clamp connection  
Stripping length, rated connection
8  mm
Clamping range, rated connection
1,5  mm²
Clamping range, min.
0,5  mm²
Clamping range, max.
1,5  mm²
Wire connection cross section AWG, min.
AWG 26  
Wire connection cross section AWG, max.
AWG 16  
Wire cross-section, solid, min.
0,5  mm²
Wire cross-section, solid, max.
1,5  mm²
Wire cross-section, solid, min. (AWG)
AWG 26  
Wire cross-section, solid, max. (AWG)
AWG 16  
Wire connection cross section, finely stranded, min.
0,5  mm²
Wire connection cross section, finely stranded, max.
1,5  mm²
Wire cross-section, finely stranded, min. (AWG)
AWG 26  
Wire cross-section, finely stranded, max. (AWG)
AWG 16  
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,5  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5  mm²
Blade size
0.6 x 3.5 mm  

Classifications

ETIM 6.0
EC001437  
ETIM 7.0
EC001437  
ETIM 8.0
EC001437  
ETIM 9.0
EC001437  
ETIM 10.0
EC001437  
ECLASS 9.0
27-37-16-01  
ECLASS 9.1
27-37-16-01  
ECLASS 10.0
27-37-16-01  
ECLASS 11.0
27-37-16-01  
ECLASS 12.0
27-37-16-01  
ECLASS 13.0
27-37-16-01  
ECLASS 14.0
27-37-16-01  
ECLASS 15.0
27-37-16-01