ACT20P-CI-CO-ILP-P
Similar to illustration
ACT20P-CI-CO-ILP-P
Connection diagram
ACT20P-CI-CO-ILP-P
Dimensioned drawing
ACT20P-CI-CO-ILP-P
Similar to illustration
ACT20P-CI-CO-ILP-P

ACT20P-CI-CO-ILP-P

Passive isolator, Input : 0(4)-20 mA, (loop powered), Output : 0(4)-20 mA, Input current loop feed

Produkt ID 7760054357
Åbn i konfiguratoren
Download datablad Tekninen tuki Tuotelataukset
Tilbehør 2 Enkeltdele 1 Anvendte produkter 14
Approvals General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Input Output Output (analogue) General data Insulation coordination Data for Ex applications (ATEX) Connection data Part description Classifications

Approvals

Agréments
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/0d1637a4-c7dd-4915-8bc8-4c9de8d8b393/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/680ba583-8621-4d57-b79a-2859678ecdf9/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/2fb608f0-c73d-4515-a7a5-878046a505f4/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/52b59257-358c-4bc4-9ea4-df407cebf157/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/5855f480-81e6-48e1-aa53-1e87419df7ba/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
인증 번호(cURusEX)
E338066 
Сертификат № (cULus)
E469563 

General ordering data

Version
Passive isolator, Input : 0(4)-20 mA, (loop powered), Output : 0(4)-20 mA, Input current loop feed 
Order No.
7760054357 
Type
ACT20P-CI-CO-ILP-P 
GTIN (EAN)
4050118559712 
Qty.
1 Styk

Dimensions and weights

Profundidad
114 mm
Depth (inches)
4,488 inch
Height
127,1 mm
Height (inches)
5,004 inch
Width
12,5 mm
Width (inches)
0,492 inch
Net weight
93 g

Temperatures

Storage temperature
-40 °C...85 °C 
Temperatura eksploatacyjna
-20 °C...60 °C 
Umidità
5...95 %, no condensation 

Probability of failure

SIL gemäß IEC 61508
None 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Входной ток
0(4)...20 mA current loop 
Датчик
4- wire sensor (with own power supply) 
Current source 
Количество входов
1 
Падение напряжения, токовый вход
3.8 V 

Output

Выходной ток
0…20 mA (if input: 0…20 mA) 
4…20 mA (if input: 4…20 mA) 
Количество выходов
1 
Тип
active 
connected control must be passive 
Ток полного сопротивления нагрузки
≤ 600 Ω 

Output (analogue)

Number analogue outputs
1 

General data

Accuracy
<0.1 % of end value 
Configuration
none 
Mounting rail
TS 35 
Nominal power consumption
2 VA
Operating altitude
≤ 2000 m 
Protection degree
IP20 
Step response time
≤ 1 ms 
Supply voltage
Loop powered, via 4…20 mA input 
Temperature coefficient
≤ 100 ppm/K 

Insulation coordination

Galvanic isolation
2-way isolator 
Insulation voltage
2.5 kV (input / output) 
Nedsmutsningsgrad
2 
Rated voltage
300 V 
Överspänningskategori
III 
Импульсное перенапряжение, до
3 kV (1.2/50µs) 
Нормы по ЭМС
EN 61326-1 
EN 61000-6-2 
EN 61000-6-4 

Data for Ex applications (ATEX)

IECEx - gas labelling
Ex ec IIC T6 Gc 
Marking
II 3 G Ex ec IIC T6 Gc 

Connection data

Type of connection
PUSH IN 
Момент затяжки, мин.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
2,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 14 
Wire cross-section, solid, min.
0,2 mm²
Wire cross-section, solid, max.
2,5 mm²
Wire connection cross section, finely stranded, min.
0,5 mm²
Wire connection cross section, finely stranded, max.
2,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2,5 mm²

Part description

Product description
The ACT20P-CI-CO-ILP-S fixed passive isolators isolate analogue standard current source signals. An analogue input current signal is converted linear and galvanic isolated into an analogue output current signal. The device is powered via the input current loop.

Features
  • Galvanic 2-way isolation (single-channel device) between input and output.
 

Classifications

ETIM 8.0
EC002653 
ETIM 9.0
EC002653 
ETIM 10.0
EC002653 
ECLASS 14.0
27-21-01-20 
ECLASS 15.0
27-21-01-20