ACT20P-UI-2RCO-DC-S

  
  

CULUS;  

Conform  

[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)  

E338066  

Limit value monitoring, Input : universal U, I, R,ϑ, Output : 2 x relays, 24 V DC power supply  

7940045760  

ACT20P-UI-2RCO-DC-S  

4050118278507  

1  items

113,6  mm

4,472  inch

119,2  mm

4,693  inch

22,5  mm

0,886  inch

142,278  g

-20 °C...70 °C  

-20 °C...60 °C  

0...95 % (no condensation)  

10…90 %, no condensation  

None  

180  a

Compliant with exemption  

7a, 7cI  

Lead 7439-92-1  

2f6dd957-421a-46db-a0c2-cf1609156924  

<±0.002 Ω per cable resistance Ω  

5 Ω @ RTD- Kabel  

configurable  
± 25 mA DC  
±5 A DC  

40 Ω  

2 MΩ  
> 10 MΩ  

configurable  
±150 mV DC  
± 600mV DC  
±30 V DC  
±300 V DC  

1  

1.2…500 kΩ  

0…10 kΩ  
0…12 kΩ  
0…15 kΩ  

RTD (2,3-wire): Pt100, Pt200, Pt1000, Ni120, Cu10  
Thermocouples: B, E, J, K, L, N, R, S, T,U  

0.1 mA / 0.05 mA (depending on measuring range) @ RTD cable  
24 V (@ 4-20 mA loop)  

B: +100…+1820 °C  
E: -270…+1000 °C  
J: (-210…+1200 °C)  
K: -270…+1372 °C  
L: +100…+900 °C  
N: (-180…+1300 °C)  
R: -50…+1768 °C  
S: -50…+1768 °C  
T: -270…+400 °C  
U: -200…+600 °C  

2  

configurable  
Top and bottom limit values, window range  
Alarm delay: 0…99 s  
Hysteresis adjustable  
auto / manual reset  

250  V

110  V

2  

200mA @ 110Vdc  
6A @ 24Vdc / 240Vac  

2 CO contacts  
normal / inverse adjustment  
Switching frequency 20 Hz  

<0.1 % of measuring range  

±2.0°C @ -20° C - 70°C  

With FDT/DTM software  
or via 7-segment display, push-buttons and rotary encoder on the device itself  
Requires configuration adapter 8978580000 CBX200 USB  

0.1 % / 10.000 h  

1,5  VA

≤ 2000 m  

≤ 3.5 W  
<2 W  

IP20  

TS 35  

± 0.05 % of measuring range final value  

450 ms  

<0.02 °C of measuring range / °C  
350 ppm/K  

9...60 V DC  

EN 61326-1  

between input ⁄ output ⁄ supply ⁄ relay  

4 kV (1.2/50 µs)  

4 kV (input / output)  

2  

300 V_eff  

III  

0,3  kV

Screw connection  

0,4  Nm

0,6  Nm

2,5  mm²

0,5  mm²

2,5  mm²

AWG 26  

AWG 12  

The devices of the ACT20P-UI-2RCO-XX-x family record current, voltage, potentiometer and temperature sensor signals (mA, A, mV, V, potentiometer, RTD and TC). They have two independent relay outputs which emit an alarm when levels exceed or fall below pre-set limits.

Properties

• Configuration and diagnosis with the FDT/DTM software “WI-Manager”.
• Manual configuration on the device is performed via the LED display by means of operating buttons and rotary encoders.
• The dual-channel trip amplifier enables various alarm functions: window alarm, alarm delay, wire break detection, hysteresis and upper / lower limit alarm.
• The active or passive signal inputs for RTD, TC, potentiometer, voltage and current are fully galvanically isolated.
• Remote diagnosis: reporting of errors (e.g. cable breaks) via status relay.
• Operational status and relay status indicated by front panel LEDs.
• Galvanic 4-way isolation between input, output and supply.

 

EC002654  

EC002654  

EC002654  

EC002654  

EC002654  

27-21-01-22  

27-21-01-22  

27-21-01-22  

27-21-01-22  

27-21-01-22  

27-21-01-22  

27-21-01-22  

27-21-01-22