PAS CMR 4,5...10 A DC
Product image
PAS CMR 4,5...10 A DC
Electric symbol
PAS CMR 4,5...10 A DC

PAS CMR 4,5...10 A DC

Current monitoring, 4.5...10 A DC, 1, Screw connection

Ürün No. 8742630000
Veri sayfasını indir Product Downloads
İlgili ürünler 3
General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance General data Insulation coordination Input Output Connection data Classifications Tender specification sheets Approvals

General ordering data

Version
Current monitoring, 4.5...10 A DC, 1, Screw connection  
Order No.
8742630000  
Type
PAS CMR 4,5...10 A DC  
GTIN (EAN)
4032248413942  
Qty.
10  adet

Dimensions and weights

Depth
95  mm
Depth (inches)
3,74  inch
Height
95  mm
Height (inches)
3,74  inch
Width
15,3  mm
Width (inches)
0,602  inch
Length
92  mm
Length (inches)
3,622  inch
Net weight
55  g

Temperatures

Storage temperature
-40 °C...85 °C  
Operating temperature
-20 °C...60 °C  
Humidity at operating temperature
0...95 % (no condensation)  
Humidity
5-95% relative humidity, Tu = 40°C, without condensation  

Probability of failure

SIL in compliance with IEC 61508
None  

Environmental Product Compliance

RoHS Compliance Status
Compliant  
REACH SVHC
No SVHC above 0.1 wt%  

General data

Configuration
none  
Galvanic isolation
between input ⁄ output ⁄ supply ⁄ relay  
Nominal power consumption
1,5  VA
Protection degree
IP20  
Rail
TS 35  
Temperature coefficient
350 ppm/K  

Insulation coordination

EMC standards
EN 55011  
EN 61000-6-1, 2, 3, 4  
Galvanic isolation
between input ⁄ output ⁄ supply ⁄ relay  
Impulse withstand voltage
6 kV  
Insulation voltage
4 kVeff / 1 min.  
Pollution severity
2  
Rated voltage
300 V  
Surge voltage category
III  

Input

Input current
4.5...10 A DC  
Input resistance, current
<50 mΩ  
Making current threshold
≤ 4.5 A  
Max. current
30 A for 10 s  
Pulse duration
min. 1 ms  
Resistance of sensor circuit
50 Ω  
Secure off
≤ 600 mA  

Output

Contact assembly
1 NO contact  
Contact material
RH/Rd (Reed contact)*  
Continuous current
100 mA  
Max. switching frequency
20 Hz  
Max. switching voltage, AC
250  V
Max. switching voltage, DC
100  V
Number of outputs
1  
Switching current
2 A  
Switching voltage AC, min.
1  V
Switching voltage DC, min.
1  V
Temperature coefficient
350 ppm/K  

Connection data

Type of connection
Screw connection  
Clamping range, rated connection
1,5  mm²
Clamping range, min.
2,5  mm²
Clamping range, max.
2,5  mm²

Classifications

ETIM 6.0
EC002654  
ETIM 7.0
EC002654  
ETIM 8.0
EC002654  
ETIM 9.0
EC002654  
ETIM 10.0
EC002654  
ECLASS 9.0
27-21-01-22  
ECLASS 9.1
27-21-01-22  
ECLASS 10.0
27-21-01-22  
ECLASS 11.0
27-21-01-22  
ECLASS 12.0
27-21-01-22  
ECLASS 13.0
27-21-01-22  
ECLASS 14.0
27-21-01-22  
ECLASS 15.0
27-21-01-22  

Tender specification sheets

Long specification

Limit-value monitoring of DC currents up to 10 A with switching output
limit-value monitoring component for measuring DC currents 4.5...10 A with
switching output. The monitoring unit is designed so that it can be plugged onto the mounting base.


Pluggable unit on base, for mounting on TS35 DIN rail
Dimensions: L/W/H 92/ 15.3/ 95 mm
Screw connection / Nominal cross-section 2.5 mm2
Protection degree: IP 20

Input                         4.5 ...10 A DC / Reed relay coil
Switch-on threshold         < 4,5  A
Switch-off threshold       < 600 mA
Output                                             1 NO / Reed contact
Switching current max 100 mA AC/DC
Switching voltage 100 V AC / 50 V DC
Ambient
temperature range 0 °C...+55 °C

Secure isolation                   EN 50178, 2-way isolation up to 6 kV
Test voltage                               4 kVeff / 1 min. input against output
Rated
voltage                                          300 V AC/DC at overvoltage category III and pollution degree 2
Approvals cULus




Type                                                             PAS CMR 4.5...10 A DC

 
Short specification

Limit-value monitoring of DC currents up to 10 A with switching output
limit-value monitoring component for measuring DC currents  4.5...10 A with
switching output. The monitoring unit is designed so that it can be plugged onto the mounting base.

 

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80)  
ROHS
Conform  
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)  
Certificate no. (cULus)
E141197