Skip to content Skip to navigation menu

PRO CP 20W 12V 1.6A

PRO CP 20W 12V 1.6A

Download data sheet Related products

PRO CP 20W 12V 1.6A

Item No. 3026100000

Properties

General ordering data

Order No.	3026100000
Type	PRO CP 20W 12V 1.6A
GTIN (EAN)	4099986953581
Qty.	1 items

Dimensions and weights

Depth	29.5 mm
Depth (inches)	1.161 inch
Height	83 mm
Height (inches)	3.268 inch
Width	26.5 mm
Width (inches)	1.043 inch
Net weight	91 g

Storage temperature	-40 °C...90 °C
Humidity at storage temperature	95 %, no condensation
Operating temperature	-35 °C...50 °C
Humidity at operating temperature	20 to 90% RH

Environmental Product Compliance

RoHS Compliance Status	Compliant with exemption
RoHS Exemption (if applicable/known)	7a, 7cI
REACH SVHC	Lead 7439-92-1
SCIP	c40c4197-e4ff-4c59-8a6f-82632592ebb9

AC input voltage range	85 … 305 V AC
Frequency range AC	47...63 Hz
Input current	450 mA
Input fuse	2 A time-lag fuse (internal)
Inrush current (typ.)	40 A
Load regulation (typ.)	2 %
Rated input voltage	100…277 V AC
Start-up time, max.	150 ms

Capacitive load	6.000 µF
Load regulation (typ.)	2 %
Mains failure bridge-over time	Mains failure bridge-over time, min.: 8 ms Input voltage type: AC Input voltage: 100 V Output current: 1,667 mA Output voltage: 12 V Mains failure bridge-over time, min.: 30 ms Input voltage type: AC Input voltage: 230 V Output current: 1,667 mA Output voltage: 12 V Mains failure bridge-over time, min.: 50 ms Input voltage type: AC Input voltage: 277 V Output current: 1,667 mA Output voltage: 12 V
Max. residual ripple	120 mV_ss
Output power	20 W
Overload protection	120 … 180 %, switch off mode
Rated output voltage	12 V DC ± 3 %

Degree of efficiency (typ.)	87 %
EMC standards	EN IEC 61204-3
MTBF	According to Standard: MLT-HDBK-217F Operating time (hours), min.: 1,000,000 h Ambient temperature: 25 °C Input voltage: 230 V Output power: 20 W Duty cycle: 100 %
Power loss, idling	100 mW
Protection degree	IP30
Short-circuit protection	Yes
Standards	EN 60335-1
Surge voltage category	III
Weight	70.6 g

Insulation coordination

Humidity at storage temperature	95 %, no condensation
Insulation voltage, input/output	4 kV
Protection class	II
Surge voltage category	III

Electrical safety (applied standards)

Safety extra-low voltage	SELV according to EN 62368-1
Safety transformers for switch-mode power supplies	According to EN 61558-2-16

Connection data (input)

Conductor cross-section, AWG/kcmil , max.	12 AWG
Conductor cross-section, AWG/kcmil , min.	26 AWG
Conductor cross-section, rigid , max.	2.5 mm²
Conductor cross-section, rigid , min.	0.2 mm²
Number of terminals	2 (L,N)
Stripping length (input)	10 mm

Connection data (output)

Conductor cross-section, AWG/kcmil , max.	14 AWG
Conductor cross-section, AWG/kcmil , min.	28 AWG
Conductor cross-section, rigid , max.	1.5 mm²
Conductor cross-section, rigid , min.	0.2 mm²
Number of terminals	2 (+ / -)
Stripping length (output)	10 mm

LED green

Operating voltage OK

Approval/Certificate/Document of Conformity	[Declaration of Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_325573)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_323930)
User Documentation	[Operating Instruction](https://mdcop.weidmueller.com/mediadelivery/asset/900_327168)
Catalogues	[Catalogues in PDF-format](https://www.weidmueller.com/int/service/technical_product_catalogues.jsp)

Classifications

ETIM 6.0	EC002540
ETIM 7.0	EC002540
ETIM 8.0	EC002540
ETIM 9.0	EC002540
ETIM 10.0	EC002540
ECLASS 9.0	27-04-07-01
ECLASS 9.1	27-04-07-01
ECLASS 10.0	27-04-07-01
ECLASS 11.0	27-04-07-01
ECLASS 12.0	27-04-07-01
ECLASS 13.0	27-04-07-01
ECLASS 14.0	27-04-07-01
ECLASS 15.0	27-04-07-01

Approvals	![CE](/picture/CE.gif)
ROHS	Conform