PRO TOPDC 24V/24V 20A
PRO TOPDC 24V/24V 20A

PRO TOPDC 24V/24V 20A

DC/DC-Wandler

Art.-Nr. 2627630000
Datenblatt herunterladen Engineering Support Produkt Downloads
Verwandte Artikel 7
Zulassungen Allgemeine Bestelldaten Abmessungen und Gewichte Temperaturen Umweltanforderungen Input Output General data EMC / shock / vibration Insulation coordination Electrical safety (applied standards) Connection data (input) Connection data (output) Anschlussdaten (Signal) Signalling Klassifikationen

Zulassungen

Approvals
![](https://assets.dam.weidmueller.com/assets/api/63e27dd8-88d2-46a7-9840-58fe3637ac20/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/2a4a8742-86e3-45cc-8b68-a2da67801c40/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/7849a070-6e16-4866-9b5a-c610b7f622e5/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/2fe64228-e403-4415-b85f-44f3a8f8bb2c/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/cbf09862-97e9-475d-b71a-c6db1e3e9933/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/d1a278f5-5acb-4199-8c83-b599817086bc/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/106d65db-9035-4009-8a4b-55480269373e/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/a141b9cd-a4d9-451f-8b4d-e03428dc3481/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/5855f480-81e6-48e1-aa53-1e87419df7ba/DAP_Master_ICON,w_80,q_80) 
ROHS
Konform 

Allgemeine Bestelldaten

Version
DC/DC-Wandler 
Order No.
2627630000 
Type
PRO TOPDC 24V/24V 20A 
GTIN (EAN)
4050118661590 
VPE
1 Stück

Abmessungen und Gewichte

Depth
125 mm
Tiefe (inch)
4,921 inch
Height
130 mm
Höhe (inch)
5,118 inch
Width
75 mm
Breite (inch)
2,953 inch
Nettogewicht
1.746 g

Temperaturen

Storage temperature
-40 °C...85 °C 
Operating temperature
-25 °C...70 °C 
Feuchtigkeit bei Betriebstemperatur
5...95 % keine Betauung 
Start up
≥ -40 °C 

Umweltanforderungen

RoHS Compliance Status
Konform mit Ausnahme 
RoHS Exemption (if applicable/known)
6c, 7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
6d8cdf22-8230-4af8-86c8-3558c716666d 

Input

Assorbimento di corrente in relazione alla tensione d'ingresso
  • Voltage type:
    DC
  • Input voltage:
    24 V
  • Input current:
    22 A
  • Voltage type:
    DC
  • Input voltage:
    18 V
  • Input current:
    30 A
Connection system
PUSH IN with actuator 
DC input voltage range
14 V...31.2 V (linear Derating from 18 V...14 V, 60% rated load @ Uin 14 V) 
Input fuse (internal)
Yes 
Input voltage, max.
31,2 V
Inrush Current Limitation
Yes 
Intensidad de conexión
max. 15 A 
Rated input voltage
24 V DC 
Vstupní napětí, min.
14 V
Wire connection method
PUSH IN 
Номинальное энергопотребление
527,5 VA

Output

Connection system
PUSH IN with actuator 
DCL - peak load reserve
  • Boost duration:
    15 ms
  • Multiple of the rated current:
    500 %
  • Boost duration:
    5 s
  • Multiple of the rated current:
    200 %
Mains failure bridge-over time
  • Mains failure bridge-over time, min.:
    10 ms
  • Input voltage type:
    DC
  • Input voltage:
    24 V
  • Output current:
    20 A
  • Output voltage:
    24 V
Nominal output current for Unom
20 A @ 60 °C 
Output current, max.
26 A
Output power
480 W
Output voltage, max.
28,8 V
Output voltage, min.
22,5 V
Output voltage, note
adjustable with potentiometer or comunication module 
Parallel connection option
yes, max 10 
Protection against inverse voltage
Yes 
Ramp-up time
≤ 100 ms 
Rated output voltage
24 V DC ± 1 % 
Residual ripple, breaking spikes
<40 mVPP@25 °C 
Wire connection method
PUSH IN 

General data

Adjacent
No 
Conformal coating
No 
Degree of efficiency
91% 
Derating
> 60°C (2.5% / 1°C) 
Housing version
Metal, corrosion resistant 
Mounting position, installation notice
On TS 35 mounting rail, 50 mm clearance above and below for free air supply. 
MTBF
  • According to Standard:
    SN 29500
  • Operating time (hours), min.:
    1.018.000 h
  • Ambient temperature:
    25 °C
  • Input voltage:
    24 V
  • Output power:
    480 W
  • Duty cycle:
    100 %
  • According to Standard:
    SN 29500
  • Operating time (hours), min.:
    320.800 h
  • Ambient temperature:
    40 °C
  • Input voltage:
    24 V
  • Output power:
    480 W
  • Duty cycle:
    100 %
Power loss, idling
5 W
Protection degree
IP20 
Short-circuit protection
Yes 
Surge voltage category
I 
II 
III 

EMC / shock / vibration

Interference immunity test acc. to
EN 55032:2015 
EN 55035:2017 
EN 61000-4-6:2008 
IEC 61000-4-8 
EN 61000-6-1:2007 
EN 61000-6-2:2005 
EN 61000-6-3:2007/A1:2011 
EN 61000-6-4:2007/A1:2011 
IEC 61000-4-2 
IEC 61000-4-3 
DIN EN 61000-4-4 
EN 61000-4-5:2005 
Noise emission in accordance with EN55032
Class B 
Shock resistance IEC 60068-2-27
30 g in all directions 
Vibration resistance IEC 60068-2-6
2,3 g (auf DIN Schiene) 
4 g (bei Direktmontage) 

Insulation coordination

Insulation voltage input / earth
1,41 kV
Insulation voltage output / earth
0,7 kV
Kategoria przepięciowa
I 
II 
III 
Stopień ochrony
III, ohne PE-Anschluss, für SELV 
Напряжение изоляции вход / выход
1,41 kV

Electrical safety (applied standards)

Electrical machine equipment
Acc. to EN60204 
Safety extra-low voltage
SELV acc. to IEC 60950-1 
PELV according to EN 60204-1 
Safety transformers for switch-mode power supplies
Conforme a la norma EN 61558-2-16 

Connection data (input)

Conductor cross-section, AWG/kcmil , max.
8 AWG
Conductor cross-section, AWG/kcmil , min.
20 AWG
Conductor cross-section, flexible , min.
0,2 mm²
Conductor cross-section, rigid , max.
10 mm²
Conductor cross-section, rigid , min.
0,2 mm²
Connection system
PUSH IN with actuator 
Number of terminals
2 for (+, -) 
Screwdriver blade
0,6 x 3,5 
Wire connection cross section, flexible (input), max.
6 mm²

Connection data (output)

Conductor cross-section, AWG/kcmil , max.
8 AWG
Conductor cross-section, AWG/kcmil , min.
20 AWG
Conductor cross-section, flexible , max.
6 mm²
Conductor cross-section, flexible , min.
0,2 mm²
Conductor cross-section, rigid , max.
10 mm²
Conductor cross-section, rigid , min.
0,2 mm²
Connection system
PUSH IN with actuator 
Number of terminals
5 (+ + / - - -) 
Screwdriver blade
0,6 x 3,5 

Anschlussdaten (Signal)

Wire connection cross-section, flexible (signal), max.
1,5 mm²
Wire connection cross-section, flexible (signal), min.
0,14 mm²
Wire connection method
PUSH IN 
Wire cross-section, AWG/kcmil , max.
16 
Wire cross-section, AWG/kcmil , min.
26 mm²
Wire cross-section, solid , max.
1,5 mm²
Wire cross-section, solid , min.
0,14 mm²

Signalling

Floating contact
Yes 
LED green/red
Green: Operation (failure-free) 
Flashing green: advance warning I>90% 
Green/red flashing: output switched off (switch-off mode) 
Flashing red: overload/error 
Status relay (max. load)
Ausgangsspannung OK (30 V DC / 1 A) 

Klassifikationen

ETIM 8.0
EC002540 
ETIM 9.0
EC002540 
ETIM 10.0
EC002540 
ECLASS 14.0
27-04-07-01 
ECLASS 15.0
27-04-07-01