BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180
BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180
Product image
BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180
Product image
BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180
Dimensional drawing
Similar to illustration
BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180
Graph
BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180
Graph
BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180
Product benefits
one connector for: Power, Signal (data) and Shielding
BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180
Product benefits
Single-handed operation
Automatic latching

BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180

PCB plug-in connector, female plug, 7.62 mm, Number of poles: 4, 180°, PUSH IN with actuator, Clamping range, max. : 6 mm², Box

Tuotteen tunnus 2681770000
Lataa tietosivu Tekninen tuki Tuotelataukset
Lisävarusteet 5 Vastineet 3 Samankaltaiset tuotteet 1
Approvals General ordering data Dimensions and weights Environmental Product Compliance System Parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to UL 1059 Packing Technical data - hybrid Conductors that can be connected - Hybrid Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
PCB plug-in connector, female plug, 7.62 mm, Number of poles: 4, 180°, PUSH IN with actuator, Clamping range, max. : 6 mm², Box 
Order No.
2681770000 
Type
BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180 
GTIN (EAN)
4050118691429 
Qty.
20 items
Product data
IEC: 800 V / 38 A / 0.5 - 6 mm²
UL: / AWG 24 - AWG 8 
Packaging
Box 

Dimensions and weights

Net weight
48,38 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System Parameters

Product family
OMNIMATE Power - series BV/SV 7.62HP 
Type of connection
Field connection 
Wire connection method
PUSH IN with actuator 
Pitch in mm (P)
7,62 mm
Pitch in inches (P)
0,3 "
Conductor outlet direction
180° 
Number of poles
4 
L1 in mm
30,48 mm
L1 in inches
1,2 "
L2 in mm
3,81 mm
L2 in inch
0,15 "
Number of rows
1 
Pin series quantity
1 
Rated cross-section
6 mm²
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Volume resistance
4.50 mΩ 
Can be coded
Yes 
Stripping length
12 mm
Tightening torque for screw flange, min.
0,2 Nm
Tightening torque for screw flange, max.
0,3 Nm
Screwdriver blade
0.6 x 3.5 
Plugging cycles
25 

Material data

Insulating material
PA GF 
Colour
black 
Colour of operational elements
white 
Carta de colores (similar)
RAL 9011 
Insulating material group
II 
Comparative Tracking Index (CTI)
≥ 500 
UL 94 flammability rating
V-0 
Material de contacto
Cu-alloy 
접점 표면
tinned 
Struttura a strati del connettore maschio
6...8 µm Sn glossy 
Storage temperature, min.
−40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
−50 °C
Operating temperature, max.
125 °C
Temperature range, installation, min.
−25 °C
Temperature range, installation, max.
125 °C

Conductors suitable for connection

Clamping range, min.
0,5 mm²
Clamping range, max.
6 mm²
Solid, min. H05(07) V-U
0,5 mm²
Solid, max. H05(07) V-U
6 mm²
Flexible, min. H05(07) V-K
0,5 mm²
Flexible, max. H05(07) V-K
6 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
6 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0,5 mm²
con terminal tubular según DIN 46 228/1, máx.
6 mm²
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      1076980000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        15 mm
    • Recommended wire-end ferrule:
      9025930000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        15 mm
    • Recommended wire-end ferrule:
      9019140000
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9004060000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      9025910000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      9019170000
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0186100000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      4 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0244100000
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      9019200000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      6 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      0533500000
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0191900000
参照テキスト
The outside diameter of the plastic collar should not be larger than the pitch (P) 
Length of ferrules is to be chosen depending on the product and the rated voltage. 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Rated current, min. number of poles (Tu=20°C)
38 A
Rated current, max. number of poles (Tu=20°C)
38 A
Corriente nominal, número de polos mín. (Tu=40 °C)
34 A
Rated current, max. number of poles (Tu=40°C)
34 A
Rated voltage for surge voltage class / pollution degree II/2
800 V
Märkspänning vid överspänningsk./Nedsmutsningsgrad III/2
630 V
Rated voltage for surge voltage class / pollution degree III/3
630 V
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 II/2
6 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
6 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/3
6 kV
단시간 내전류 저항
3 x 1s with 420 A 
Distancia mín.
10,4 mm
Kúszóút, min.
12,7 mm

Rated data acc. to UL 1059

Rated voltage (Use group F / UL 1059)
600 V
Rated current (Use group F / UL 1059)
33 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 8 

Packing

Packaging
Box 
VPE length
354 mm
VPE width
140 mm
VPE height
63 mm

Technical data - hybrid

Pitch in mm (Signal)
3.81 mm 
Pitch in inches (Signal)
0.15 inch 
Number of poles (Signal)
4 
L2 in mm
3,81 mm
L2 in inch
0,15 "
Number of rows (Signal)
2 
Materiál kontaktů (signál)
CuMg 
Kontaktoberfläche (Signal)
tinned 
Layer structure of the plug contact (Signal)
1-3 µ Ni / 4-8 µ Sn 
Rated voltage for overvoltage class/pollution severity level II/2 (Signal)
250 V 
Rated voltage for overvoltage class/pollution severity level III/2 (Signal)
150 V 
Rated voltage for overvoltage class/pollution severity level III/3 (Signal)
63 V 
Rated impulse voltage for overvoltage class/pollution severity level II/2 (Signal)
2.5 kV 
Rated impulse voltage for overvoltage class/pollution severity level III/2 (Signal)
2.5 kV 
Rated impulse voltage for overvoltage class/pollution severity level III/3 (Signal)
2.5 kV 
Short-time withstand current resistance (Signal)
3 x 1s with 80 A 
Connector cross-section (Signal)
AWG 26...AWG 16 

Conductors that can be connected - Hybrid

Clamping range, rated connection (Power)
0.5...10 mm² 
Clamping range, rated connection (Signal)
0.2...1.5 mm² 
Connector cross-section (Power)
AWG 24...AWG 8 
Connector cross-section AWG (Signal)
AWG 26...AWG 16 
solid, H05(07) V-U (Power)
0.5...10 mm² 
solid, H05(07) V-U (Signal)
0.14...1.5 mm² 
flexible, H05(07) V-K (Power)
0.5...6 mm² 
flexible, H05(07) V-K (Signal)
0.14...1.5 mm² 
with wire-end ferrule with collar (Power)
0.5...6 mm² 
mit AEH mit Kragen DIN 46 228/4 (Signal)
0.25...1.5 mm² 
with wire-end ferrule according to DIN 46 228/1 (Power)
0.5...6 mm² 
with wire-end ferrule according to DIN 46 228/1 (Signal)
0.25...1.5 mm² 

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Technical specifications refer to the power contacts
  • Technical data of signal contacts: 50V / 5A, stripping length 8mm
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule with plastic collar to DIN 46228/4
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Additional pole combinations on request
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002638 
ETIM 9.0
EC002638 
ETIM 10.0
EC002638 
ECLASS 14.0
27-46-03-02 
ECLASS 15.0
27-46-03-02