PVN DC 3I 3O 3MPP SW SPD1R EVO 11
PVN DC 3I 3O 3MPP SW SPD1R EVO 11
PVN DC 3I 3O 3MPP SW SPD1R EVO 11
PVN DC 3I 3O 3MPP SW SPD1R EVO 11

PVN DC 3I 3O 3MPP SW SPD1R EVO 11

Photovoltaics, Combiner Box, PV Next, 1100 V, 3 MPP's, 3 Inputs / 3 Outputs per MPP, Surge protection I / II, Switch disconnector, MC4-Evo 2

Tuotteen tunnus 2890370000
Lataa tietosivu Tuotelataukset Tekninen tuki
Lisävarusteet 12 On lisävaruste 1 Samankaltaiset tuotteet 66
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance DC string monitoring Guarantee Electrical characteristics Enclosure General data Inputs Outputs Surge protection DC side DC load break switch Classifications Tender specification sheets

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
Photovoltaics, Combiner Box, PV Next, 1100 V, 3 MPP's, 3 Inputs / 3 Outputs per MPP, Surge protection I / II, Switch disconnector, MC4-Evo 2 
Best.-Nr.
2890370000 
Type
PVN DC 3I 3O 3MPP SW SPD1R EVO 11 
GTIN (EAN)
4064675878216 
Qty.
1 items

Dimensions and weights

Depth
226 mm
Depth (inches)
8,898 inch
Depth with add-on components
226,2 mm
Height
336 mm
Height (inches)
13,228 inch
Width
400 mm
Width (inches)
15,748 inch
Net weight
5 844 g

Temperatures

Ambient temperature
-40 °C…40 °C 
Humidity
5 to 95 % (non-condensing) 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS-Ausnahme (falls zutreffend/bekannt)
6c 
REACH SVHC
Lead 7439-92-1 
SCIP
bdab5698-6a20-4370-8e28-8810d882d01a 

DC string monitoring

Monitoring function
Non monitored 

Guarantee

Time interval
5 years 

Electrical characteristics

Current per Maximum Power Point, max.
42 A
Rated DC current per connection
  • Current per string, max.:
    42 A
  • Rated current:
    42 A
Rated DC voltage
1 100 V
Rated short-term current resistance
  • Rated current:
    52,5 A

Enclosure

Clase de protección
II 
Cover
removeable 
Enclosure attachment
Via mounting foots 
Impact resistance
IK08 in accordance with IEC 62208 
IK10 in accordance with IEC 62262 
Insulating material
Polyester glass-fibre reinforced, Polycarbonate 
Polycarbonate 
Ligne type de raccordement
Plug MC4-Evo 2 
Type of mounting
Wall mounting 

General data

Degré de protection
IP65 
Installation location
Protected outdoor area (Land and Sea) 
Szabványok
EN 61643-31 
IEC 61439-2 ed 3.0 

Inputs

Amount of maximum power points (MPP)
3 
DC Input + & -
  • Wire connection:
    • Type of connection:
      Stäubli MC4-Evo 2 connector
    • Wire cross-section, min.:
      4 mm²
    • Wire cross-section, max.:
      6 mm²
Functional earth connector
  • Cable entry:
    • Number of cable entries:
      2
    • Cable diameter, min.:
      4 mm
    • Cable diameter, max.:
      9 mm
    • Cable gland:
      M 25
  • Wire connection:
    • Type of connection:
      PUSH IN with actuator
    • Flexible, max. H05(07) V-K:
      25 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      16 mm²
Fuse type
Neither fuse cartridge nor holder 
Fuses
No 
Max. number of DC inputs
per Maximum Power Point 3 inputs connected in parallel 
Number of string inputs per MPP
≤ 3 
Surge protection auxiliary contact
  • Cable entry:
    • Number of cable entries:
      1
    • Cable diameter, min.:
      4 mm
    • Cable diameter, max.:
      9 mm
    • Cable gland:
      M 25
  • Wire connection:
    • Type of connection:
      PUSH IN with actuator
    • Flexible, max. H05(07) V-K:
      1,5 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      1,5 mm²
Number of inputs
9 

Outputs

DC Output + & -
  • Wire connection:
    • Type of connection:
      Stäubli MC4-Evo 2 connector
    • Wire cross-section, min.:
      4 mm²
    • Wire cross-section, max.:
      6 mm²
Max. number of DC outputs
per Maximum Power Point 3 outputs connected in parallel 

Surge protection DC side

Corrente di dispersione max. (8/20 µs)
40 kA
Corrente di prova da fulmine Iimp (10/350 µs)
6.25 kA 
Maximum continuous operating voltage DC UCPV mode +/-, -/PE, +/PE
1 100 V
Norme
EN 61643-31 
IEC 61439-2 ed 3.0 
Protection level Up (+/-)
≤ 3.8 kV 
Protection level Up (+/PE)
≤ 3.8 kV 
Protection level Up (-/PE)
≤ 3.8 kV 
Prąd wyładowczy In (8/20 µs)
20 kA 
PV system voltage, max. Ucpv
1 100 V
Short-circuit curent ISCPV
11 000 A
Surge protection DC side
1000 V type I + II 
Total avledningsström Itotalt (10/350µs)
6,25 kA
Łączny prąd wyładowczy Iłączny (8/20 µs)
50 kA
Класс требований
Type I/II 
보호 레벨 Up (+/- , -/PE , +/PE)
≤ 3.8 kV 

DC load break switch

Motor drive available
No 
Nominal current
42 A
Nominal voltage
1 100 V
Number of contacts as NC contact
0 
Number of contacts as NO contact
6 
Rated impulse withstand voltage
8 kV 
Rated short-circuit making current
1,4 kA
Switch disconnector execution
switch in cover 
Switching disconnector capacity
DC-PV1 
Voltage type
DC 

Classifications

ETIM 8.0
EC003857 
ETIM 9.0
EC003857 
ETIM 10.0
EC003857 
ECLASS 14.0
22-57-02-92 
ECLASS 15.0
22-57-02-92 

Tender specification sheets

Long specification

Combiner box for inverters with 3 MPP tracker, suitable for protecting the DC side of a photovoltaic system according to DIN CLC/TS 51643-32.

MPP1:
3 inputs, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063
3 outputs, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063

MPP2 to 3:
identical to MPP1

Max. string voltage Uoc: 1100 VDC
1 class/type I + II combined arrester with signal contact
With lockable DC load break switch for safe separation of the string lines according to DIN EN IEC 60947-3
Connection of the signal contact via M16 cable glands (Clamping range 5-10 mmØ) max. conductor cross-section: 1.5 mm²
Connection of the functional earth via M16 cable glands (Clamping range 5-10 mmØ) Conductor cross-section: ≥ 16 mm²
Protection class: IP65
All built into a glas fibre reinforced polyester housing. Dimensions HxWxD: 336x400x226 mm

Approval according to low voltage switchgear and controlgear IEC 61439-1 and EN 61439-2