DRM270730LT AU
Product image
Similar to illustration
DRM270730LT AU
Schéma
Vue des broches par dessous
DRM270730LT AU
Graph
DC load limit curve
Resistive load
DRM270730LT AU
Graph
Electrical service life
DRM270730LT AU
Graph
Derating curve
Relay in combination with base
DRM270730LT AU
Graph
AC operational voltage range
DRM270730LT AU
Dimensional drawing
DRM270730LT AU
Miscellaneous
Type codes

DRM270730LT AU

D-SERIES DRM, Relay, Number of contacts: 2, CO contact, AgNi gold-plated, Rated control voltage: 230 V AC, Continuous current: 10 A, Plug-in connection

Produkt ID 7760056186
Download datablad Engineering-support Produktdownloads
Tilbehør 21 Modstykker 6 Anvendte produkter 2
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Connection data Classifications

Approvals

ROHS
Conform 

General ordering data

Version
D-SERIES DRM, Relay, Number of contacts: 2, CO contact, AgNi gold-plated, Rated control voltage: 230 V AC, Continuous current: 10 A, Plug-in connection 
Order No.
7760056186 
Type
DRM270730LT AU 
GTIN (EAN)
4032248922253 
Qty.
20 Styk

Dimensions and weights

Depth
35,7 mm
Depth (inches)
1,406 inch
Height
27,4 mm
Height (inches)
1,079 inch
Width
21 mm
Byggbredd (tum)
0,827 inch
正味重量
30,624 g

Temperatures

Storage temperature
-40 °C...70 °C 
Ambient temperature
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Control side

Номинальное напряжение
230 V AC 
Rated current AC
6.1 mA (50 Hz) 
5.2 mA (60 Hz) 
Puissance nominale
1.0...1.2VA (60HZ) 
Tekercsellenállása
16000 Ω ± 10 % 
Status indicator
red LED 

Load side

znamionowe napięcie załączające
250 V AC 
Continuous current
10 A 
Макс. частота коммутации при номинальной нагрузке
0,1 Hz
Min. switching power
1 mA @ 1 V 
Inrush current
20 A / 50 ms 
AC switching capacity (resistive), max.
2500 VA 
DC switching capacity (resistive), max.
240 W @ 24 V 
スイッチオン遅延
<20 ms 
Ritardo alla disinserzione
<20 ms 
Contact type
2 CO contact (AgNi gold-plated) 
Mechanical service life
20 x 106 switching cycles 

General data

Test button available
Yes 
Version of test button
Lockable test button 
Momentary test button 
Mechanical switch position indicator
Yes 
Colour
Transparent 
UL94 flammability rating component
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay status indicator
  • UL94 flammability rating:
    HB
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB

Insulation coordination

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Clearance and creepage distances for control side - load side
≥ 5.5 mm 
제어 측면 - 부하 측면에 대한 절연 강도
1.8 kVeff /1 min. 
Rigidità dielettrica dei contatti adiacenti
1 kVeff / 1 min 
Dielectric strength of open contact
1 kVeff / 1 min 
Impulse withstand voltage
6 kV (1.2/50 µs) 
Protection degree
IP20 

Connection data

Wire connection method
Plug-in connection 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01