LM2N 3.50/06/90 3.2SN OR BX
Product image
Similar to illustration
LM2N 3.50/06/90 3.2SN OR BX
Dimensional drawing
LM2N 3.50/06/90 3.2SN OR BX
Graph

LM2N 3.50/06/90 3.2SN OR BX

Printed circuit board terminals, 3.50 mm, Number of poles: 6, 90°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 2.08 mm², Box

Produkt ID 1703710000
Download datablad Engineering Support Product Downloads
Anvendte produkter 23
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

Omologazioni
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319226/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319262/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
N° certificato (UR)
E60693 

General ordering data

Versione
Printed circuit board terminals, 3.50 mm, Number of poles: 6, 90°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 2.08 mm², Box 
N. d’ordine
1703710000 
Tipo
LM2N 3.50/06/90 3.2SN OR BX 
GTIN (EAN)
4008190910785 
CPZ
100 Styk
Product data
IEC: 320 V / 13 A / 0.5 - 1.5 mm²
UL: 300 V / 10 A / AWG 28 - AWG 14 
Packaging
Box 

Dimensions and weights

Profondità
16,75 mm
Głębokość (cale)
0,659 inch
Posizione verticale
27,3 mm
Height (inches)
1,075 inch
Height of lowest version
24,1 mm
Larghezza
12,85 mm
Width (inches)
0,506 inch
Peso netto
4,62 g

Environmental Product Compliance

Stato conformità RoHS
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Signal - series LM 
Wire connection method
Clamping yoke connection 
Mounting onto the PCB
THT solder connection 
Conductor outlet direction
90° 
Pitch in mm (P)
3,5 mm
Pitch in inches (P)
0,138 "
Number of poles
6 
Pin series quantity
2 
Fitted by customer
Yes 
Number of rows
2 
Max. adjacent poles per row
24 
Solder pin length (l)
3,2 mm
Dimensiones del pin de soldadura
1.0 x 0.6 mm 
Průměr otvoru pájecího očka (D)
1,3 mm
Tolleranza diametro di equipaggiamento (D)
+ 0,1 mm 
Numero di codoli a saldare per polo
1 
Lama cacciavite
0.4 x 2.5 
Screwdriver blade standard
DIN 5264 
Tightening torque, min.
0,2 Nm
Tightening torque, max.
0,2 Nm
Clamping screw
M 2 
Stripping length
5 mm
L1 in mm
7 mm
L1 in inches
0,276 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 
Volume resistance
3.60 mΩ 

Material data

Materiale isolante
PA 
Colori
orange 
Tabella dei colori (simile)
RAL 2000 
Gruppo materiali isolanti
I 
Comparative Tracking Index (CTI)
≥ 600 
UL 94 可燃性等級
V-2 
Materiale dei contatti
Cu-alloy 
Superficie dei contatti
tinned 
Rivestimento
1-3 μm Ni 
4-6 μm SN 
Tipo di stagnatura
matt 
Struttura a strati del collegamento a saldare
1.5...3 µm Ni / 4...6 µm Sn matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
100 °C

Conductors suitable for connection

Campo di sezioni, min.
0,08 mm²
2,08 mm²
Sezione di collegamento cavo AWG, min.
AWG 28 
Sezione di collegamento cavo AWG, max.
AWG 14 
rigido, min. H05(07) V-U
0,5 mm²
rigido, max. H05(07) V-U
1,5 mm²
Flessibile, min. H05(07) V-K
0,5 mm²
Flessibile, max. H05(07) V-K
1,5 mm²
con terminale AEH con collare DIN 46 228/4, min.
0,5 mm²
con terminale AEH con collare DIN 46 228/4, max.
0,75 mm²
Calibro a tampone secondo EN 60999 a x b; ø
2.4 mm x 1.5 mm 
Conduttore innestabile
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409600000
Testo di riferimento
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Corrente di dimensionamento, numero minimo di poli (Tu=20 °C)
13 A
Corrente di dimensionamento, numero massimo di poli (Tu=20 °C)
12 A
Corrente di dimensionamento, numero minimo di poli (Tu=40 °C)
11 A
Corrente di dimensionamento, numero massimo di poli (Tu = 40°C)
10 A
Tensione di dimensionamento con classe di sovratensione/grado di lordura II/2
320 V
Tensione di dimensionamento con classe di sovratensione/grado di lordura III/2
160 V
Tensione nominale con classe di sovratensione/grado di lordura III/3
160 V
Tensione di dimensionamento con classe di sovratensione/grado di lordura II/2
2,5 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
2,5 kV
Sovratensione nominale con classe di sovratensione/grado di lordura III/3
2,5 kV
Portata transitoria
3 x 1s with 72 A 

Rated data acc. to CSA

Institute (CSA)
CSA 
Certificate No. (CSA)
154685-1202192 
Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
10 A
Jmenovitý proud (aplikační skupina D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 28 
Wire cross-section, AWG, max.
AWG 14 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

Institute (UR)
UR 
Certificate No. (UR)
E60693 
Jmenovité napětí (aplikační skupina B / UL 1059)
300 V
Tensione nominale (Gruppo D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
10 A
Corrente nominale (Gruppo D / UL 1059)
10 A
Sezione di collegamento cavo AWG, min.
AWG 28 
Průřez vodiče, AWG, max.
AWG 14 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Packing

Verpackung
Box 
VPE length
140 mm
VPE width
86 mm
VPE height
67 mm

Important note

Conformità IPC
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Note
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Max. outer diameter of the conductor: 2.9 mm
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01