LM2N 3.50/32/90 3.2SN OR BX
Product image
Similar to illustration
LM2N 3.50/32/90 3.2SN OR BX
Dimensional drawing
LM2N 3.50/32/90 3.2SN OR BX
Graph

LM2N 3.50/32/90 3.2SN OR BX

Printed circuit board terminals, 3.50 mm, Number of poles: 32, 90°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 2.08 mm², Box

Product ID 1703840000
Gegevensblad downloaden Engineering Support Product Downloads
Verwante producten 23
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319226/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319262/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate No. (UR)
E60693 

General ordering data

Version
Printed circuit board terminals, 3.50 mm, Number of poles: 32, 90°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 2.08 mm², Box 
Order No.
1703840000 
Type
LM2N 3.50/32/90 3.2SN OR BX 
GTIN (EAN)
4008190910914 
Qty.
25 items
Product data
IEC: 320 V / 13 A / 0.5 - 1.5 mm²
UL: 300 V / 10 A / AWG 28 - AWG 14 
Packaging
Box 

Dimensions and weights

Depth
16,75 mm
Depth (inches)
0,659 inch
Height
27,3 mm
Height (inches)
1,075 inch
Height of lowest version
24,1 mm
Width
58,35 mm
Width (inches)
2,297 inch
Net weight
21,578 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Signal - series LM 
Wire connection method
Clamping yoke connection 
Mounting onto the PCB
THT solder connection 
Conductor outlet direction
90° 
Rozteč v mm (P)
3,5 mm
Pitch in inches (P)
0,138 "
Number of poles
32 
Pin series quantity
2 
Fitted by customer
Yes 
Number of rows
2 
Max. adjacent poles per row
24 
Solder pin length (l)
3,2 mm
Rozměry pájecích pinů
1.0 x 0.6 mm 
Solder eyelet hole diameter (D)
1,3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
Number of solder pins per pole
1 
Screwdriver blade
0.4 x 2.5 
Screwdriver blade standard
DIN 5264 
Tightening torque, min.
0,2 Nm
Tightening torque, max.
0,2 Nm
Clamping screw
M 2 
Stripping length
5 mm
L1 in mm
52,5 mm
L1 in inches
2,067 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 
Volume resistance
3.60 mΩ 

Material data

Изоляционный материал
PA 
컬러 코드
orange 
Carta de colores (similar)
RAL 2000 
Gruppo materiali isolanti
I 
Índice de resistencia al encaminamiento eléctrico (CTI)
≥ 600 
UL 94 flammability rating
V-2 
Matériau des contacts
Cu-alloy 
Contact surface
tinned 
Coating
1-3 μm Ni 
4-6 μm SN 
Тип лужения
matt 
Estructura de capas de la conexión por soldadura
1.5...3 µm Ni / 4...6 µm Sn matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
100 °C

Conductors suitable for connection

Clamping range, min.
0,08 mm²
2,08 mm²
Sezione di collegamento cavo AWG, min.
AWG 28 
Wire connection cross section AWG, max.
AWG 14 
Rígido, mín. H05(07) V-U
0,5 mm²
entrådig, max. H05(07) V-U
1,5 mm²
Flessibile, min. H05(07) V-K
0,5 mm²
Flessibile, max. H05(07) V-K
1,5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,5 mm²
műanyag galléros érvéghüvellyel, DIN 46228 pt 4, max.
0,75 mm²
Нутрометр в соответствии с EN 60999 a x b; ø
2.4 mm x 1.5 mm 
Conductor embornable
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409600000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Prąd znamionowy, min. liczba biegunów (Tu=20°C)
13 A
Corrente di dimensionamento, numero massimo di poli (Tu=20 °C)
12 A
Corriente nominal, número de polos mín. (Tu=40 °C)
11 A
Corrente di dimensionamento, numero massimo di poli (Tu = 40°C)
10 A
Tensione di dimensionamento con classe di sovratensione/grado di lordura II/2
320 V
Névleges feszültség a III/2 túlfeszültség osztályhoz / szennyezés mértékéhez
160 V
Номинальное импульсное напряжение при категории помехозащищенности/Категория загрязнения III/3
160 V
Tension de choc nominale pour classe de surtension/Degré de pollution II/2
2,5 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
2,5 kV
Tension de choc nominale pour classe de surtension/Degré de pollution III/3
2,5 kV
Resistencia a corrientes de corta duración
3 x 1s with 72 A 

Rated data acc. to CSA

Institute (CSA)
CSA 
Certificate No. (CSA)
154685-1202192 
Rated voltage (Use group B / CSA)
300 V
Jmenovité napětí (aplikační skupina D / CSA)
300 V
Rated current (Use group B / CSA)
10 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 28 
Wire cross-section, AWG, max.
AWG 14 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

Institute (UR)
UR 
Certificate No. (UR)
E60693 
Rated voltage (Use group B / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Jmenovitý proud (aplikační skupina B / UL 1059)
10 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 28 
Wire cross-section, AWG, max.
AWG 14 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Packing

Packaging
Box 
VPE length
195 mm
Šířka VPE
135 mm
Výška VPE
37 mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Max. outer diameter of the conductor: 2.9 mm
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01