PRO CP 20W 24V 0.8A

PRO CP 20W 24V 0.8A

, 24 V

Produkt ID 3033220000
Download datablad Engineering Support Product Downloads
Tilbehør 1 Anvendte produkter 2
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Input Output General data Insulation coordination Electrical safety (applied standards) Connection data (input) Connection data (output) Signalling Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
ROHS
Conform  

General ordering data

Version
, 24 V  
Order No.
3033220000  
Type
PRO CP 20W 24V 0.8A  
GTIN (EAN)
4099986986091  
Qty.
1  Styk

Dimensions and weights

Depth
29,5  mm
Depth (inches)
1,161  inch
Height
83  mm
Height (inches)
3,268  inch
Width
26,5  mm
Width (inches)
1,043  inch
Net weight
91  g

Temperatures

Storage temperature
-40 °C...90 °C  
Humidity at storage temperature
95 %, no condensation  
Operating temperature
-35 °C...50 °C  
Humidity at operating temperature
20 to 90% RH  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7a, 7cI  
REACH SVHC
Lead 7439-92-1  
SCIP
c40c4197-e4ff-4c59-8a6f-82632592ebb9  

Input

AC input voltage range
85 … 305 V AC  
Connection system
PUSH IN with actuator  
Frequency range AC
47...63 Hz  
Input current
450 mA  
Input fuse
2 A time-lag fuse (internal)  
Inrush current (typ.)
40  A
Load regulation (typ.)
2  %
Nominal power consumption
22,99  VA
Rated input voltage
100…277 V AC  
Start-up time, max.
150  ms

Output

Capacitive load
3.000 µF  
Load regulation (typ.)
2  %
Mains failure bridge-over time
  • Mains failure bridge-over time, min.:
    8 ms
  • Input voltage type:
    AC
  • Input voltage:
    100 V
  • Output current:
    833 mA
  • Output voltage:
    24 V
  • Mains failure bridge-over time, min.:
    30 ms
  • Input voltage type:
    AC
  • Input voltage:
    230 V
  • Output current:
    833 mA
  • Output voltage:
    24 V
  • Mains failure bridge-over time, min.:
    50 ms
  • Input voltage type:
    AC
  • Input voltage:
    277 V
  • Output current:
    833 mA
  • Output voltage:
    24 V
Max. residual ripple
240 mVss  
Output current, max.
833  mA
Output power
20  W
Output voltage, max.
24,72  V
Output voltage, min.
23,28  V
Overload protection
120 … 180 %, switch off mode  
Rated output voltage
24 V DC ± 3 %  

General data

Building height
83  mm
Building Width
26,5  mm
Degree of efficiency (typ.)
87  %
EMC standards
EN IEC 61204-3  
Mounting position, installation notice
Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring subassemblies.  
On TS 35 mounting rail, 50 mm clearance above and below for free air supply.  
MTBF
  • According to Standard:
    MLT-HDBK-217F
  • Operating time (hours), min.:
    1.000.000 h
  • Ambient temperature:
    25 °C
  • Input voltage:
    230 V
  • Output power:
    20 W
  • Duty cycle:
    100 %
Power loss, idling
100  mW
Protection degree
IP30  
Short-circuit protection
Yes  
Standards
EN 60335-1  
Surge voltage category
III  

Insulation coordination

Humidity at storage temperature
95 %, no condensation  
Insulation voltage, input/output
4  kV
Protection class
II  
Surge voltage category
III  

Electrical safety (applied standards)

Safety extra-low voltage
SELV according to EN 62368-1  
Safety transformers for switch-mode power supplies
According to EN 61558-2-16  

Connection data (input)

Conductor cross-section, AWG/kcmil , max.
12  AWG
Conductor cross-section, AWG/kcmil , min.
26  AWG
Conductor cross-section, rigid , max.
2,5  mm²
Conductor cross-section, rigid , min.
0,2  mm²
Connection system
PUSH IN with actuator  
Number of terminals
2 (L,N)  
Stripping length (input)
10  mm

Connection data (output)

Conductor cross-section, AWG/kcmil , max.
14  AWG
Conductor cross-section, AWG/kcmil , min.
28  AWG
Conductor cross-section, rigid , max.
1,5  mm²
Conductor cross-section, rigid , min.
0,2  mm²
Number of terminals
2 (+ / -)  
Stripping length (output)
10  mm

Signalling

LED green
Operating voltage OK  

Classifications

ETIM 6.0
EC002540  
ETIM 7.0
EC002540  
ETIM 8.0
EC002540  
ETIM 9.0
EC002540  
ETIM 10.0
EC002540  
ECLASS 9.0
27-04-07-01  
ECLASS 9.1
27-04-07-01  
ECLASS 10.0
27-04-07-01  
ECLASS 11.0
27-04-07-01  
ECLASS 12.0
27-04-07-01  
ECLASS 13.0
27-04-07-01  
ECLASS 14.0
27-04-07-01  
ECLASS 15.0
27-04-07-01