PVC DC 2I 2O 10MPP RD WM4 11
PVC DC 2I 2O 10MPP RD WM4 11
PVC DC 2I 2O 10MPP RD WM4 11

PVC DC 2I 2O 10MPP RD WM4 11

Photovoltaics, Combiner Box, Fireman's switch, PV Next, 10 MPP's, 2 Inputs / 2 Outputs per MPP, Remote disconnector, WM4C, 1100 V

Cikkszám 8000130052
Adatlap letöltése Product Downloads
Toebehoren 11 Is accessoire van 4 Onderdelen 2 Verwante producten 26
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Included in delivery Guarantee Electrical characteristics Enclosure General data Inputs Outputs Remote disconnector Surge protection DC side Product images Classifications Tender specification sheets

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
Photovoltaics, Combiner Box, Fireman's switch, PV Next, 10 MPP's, 2 Inputs / 2 Outputs per MPP, Remote disconnector, WM4C, 1100 V 
Order No.
8000130052 
Type
PVC DC 2I 2O 10MPP RD WM4 11 
GTIN (EAN)
4099987124997 
Qty.
1 items

Dimensions and weights

Depth
255 mm
Depth (inches)
10,039 inch
Height
485 mm
Height (inches)
19,094 inch
Width
600 mm
Width (inches)
23,622 inch
Net weight
16.880 g

Temperatures

Ambient temperature
-20 °C…50 °C 
Humidity
5 - 90 %, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Included in delivery

Included accessories
  • Article:
    Mounting foot
  • Quantity:
    4
  • Article:
    Dustcap VSSO
  • Quantity:
    40
  • Article:
    Sealing plug
  • Quantity:
    3

Guarantee

Time interval
5 years 

Electrical characteristics

Rated DC current per connection
  • Current per string, max.:
    35 A
Znamionowa obciążalność prądowa krótkoterminowa
  • Rated current:
    51,25 A
Ток на каждую точку максимальной мощности, макс.
41 A
정격 DC 전압
1.100 V

Enclosure

Clase de protección
II 
Connection type string
Plug WM4C 
Cover
Hinged door 
Enclosure attachment
Via mounting foots 
Insulating material
Polyester glass-fibre reinforced, Polycarbonate 
Schlagfestigkeit
IK08 in accordance with IEC 62262 
Typ montáže
Wall mounting 

General data

Installation location
Protected outdoor area (Land and Sea) 
Normes
EN 61439-2 
OVE-Directive R 11-1:2022-05-01 
Védelmi osztály
IP65 

Inputs

Amount of maximum power points (MPP)
10 
DC Input + & -
  • Wire connection:
    • Type of connection:
      WM4C plug-in connector
    • Wire cross-section, min.:
      4 mm²
    • Wire cross-section, max.:
      6 mm²
Fuses
No 
Max. number of DC inputs
per Maximum Power Point 2 inputs connected in parallel 
Number of conduit inlets
4 
Number of string inputs per MPP
≤ 2 
Number of inputs
20 

Outputs

DC Output + & -
  • Wire connection:
    • Type of connection:
      WM4C plug-in connector
    • Wire cross-section, min.:
      4 mm²
    • Wire cross-section, max.:
      6 mm²
Max. number of DC outputs
per Maximum Power Point 2 outputs connected in parallel 

Remote disconnector

Automatic reclosing after voltage drop
Yes 
Number of operating cycles
10000 
Control voltage
100 V AC - 250 V AC 50/60Hz 
Remote disconnector auxiliary contact
  • Cable entry:
    • Number of cable entries:
      1
  • Wire connection:
    • Type of connection:
      PUSH IN with actuator
    • Flexible, max. H05(07) V-K:
      2,5 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      2,5 mm²
Remote disconnector control contact
  • Cable entry:
    • Number of cable entries:
      1
  • Wire connection:
    • Type of connection:
      PUSH IN with actuator
    • Flexible, max. H05(07) V-K:
      2,5 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      2,5 mm²
Type of power circuit disconnection
Under voltage tripping 
Turn-off time
1.5 s 
Current consumption of switch
  • Type of switch:
    Fireman switch
  • Current consumption, note:
    The Peak current only arises for a short time when the capacitors of the fireman switch were previously completely discharged.
  • Current consumption peak:
    900 mA
  • Current consumption continuous:
    90 mA
Number of breaking operation cycles at rated current
300 
Switch disconnector execution
Remote disconnector inside enclosure 
Switching disconnector capacity
DC-PV1 

Surge protection DC side

Norme
EN 61439-2 
OVE-Directive R 11-1:2022-05-01 
Protezione contro le sovratensioni lato DC
No surge protection 

Product images

Classifications

ETIM 8.0
EC003857 
ETIM 9.0
EC003857 
ETIM 10.0
EC003857 
ECLASS 14.0
22-57-02-92 
ECLASS 15.0
22-57-02-92 

Tender specification sheets

Long specification

Combiner box for inverters with Fireman switch for the connection to 10 MPP tracker.
Suitable for remote disconnection of the DC side by the fire department according to VDE-AR-E2100-712.
Max. string voltage Uoc: 1100 VDC

MPP1:
2 inputs, connection via WM4 C connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063
2 outputs, connection via WM4 C connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063

MPP2 to 10:
identical to MPP1

DC fireman switch:
Switching off by undervoltage tripping.
Switching off by reaching a temperature of ≥ 100 °C in the housing.
Automatic reconnection after the control voltage (230 V AC) is applied again.
With signal contact.

Connection of the fireman switch control line 230 VAC via M16 cable glands (Clamping range 5-10 mmØ) max. conductor cross-section: 1.5 mm².
Connection of the signal contact 24 VDC (max. 300 mA) via M16 cable glands (Clamping range 5-10 mmØ) max. conductor cross-section: 1.5 mm².
Protection class: IP65.
All built into a glas fibre reinforced polyester housing. Dimensions HxWxD: 485x600x250 mm.

Approval according to low voltage switchgear IEC 61439-1 and EN 61439-2