RCMKITP-I 115VAC 2CO LD
Product image
Similar to illustration
RCMKITP-I 115VAC 2CO LD
Wiring diagram
RCMKITP-I 115VAC 2CO LD
Graph
DC load limit curve
Resistive load
RCMKITP-I 115VAC 2CO LD
Graph
Derating curve
Relay in combination with base
RCMKITP-I 115VAC 2CO LD
Graph
AC operational voltage range
RCMKITP-I 115VAC 2CO LD
Graph
Electrical service life
250 V AC resistive load
RCMKITP-I 115VAC 2CO LD
Dimensional drawing
RCMKITP-I 115VAC 2CO LD
Miscellaneous
RCMKITP-I 115VAC 2CO LD
Miscellaneous
RCMKITP-I 115VAC 2CO LD
Miscellaneous
RCMKITP-I 115VAC 2CO LD

RCMKITP-I 115VAC 2CO LD

RIDERSERIES RCM, Relay module, Number of contacts: 2, CO contact AgNi, Rated control voltage: 115 V AC, Continuous current: 12 A, PUSH IN, Test button available: Yes

Product ID 8921100000
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 19 Afzonderlijke onderdelen 4 Verwante producten 4
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319234/-S800/-T1z1mm-S80)  
ROHS
Conform  

General ordering data

Version
RIDERSERIES RCM, Relay module, Number of contacts: 2, CO contact AgNi, Rated control voltage: 115 V AC, Continuous current: 12 A, PUSH IN, Test button available: Yes  
Order No.
8921100000  
Type
RCMKITP-I 115VAC 2CO LD  
GTIN (EAN)
4032248692316  
Qty.
10  items
Delivery status
This article will no longer be available in the future.  
Available until
31.12.2025  

Dimensions and weights

Depth
78,3  mm
Depth (inches)
3,083  inch
Height
98  mm
Height (inches)
3,858  inch
Width
28  mm
Width (inches)
1,102  inch
Net weight
96,5  g

Temperatures

Storage temperature
-40 °C...70 °C  
Ambient temperature
-40 °C…70 °C  
Humidity
40 °C / 93 % rel. humidity, no condensation  

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

Control side

Rated control voltage
115 V AC  
Rated current AC
10.5 mA  
Power rating
1.36 VA  
Coil resistance
4845 Ω ± 12 %  
Status indicator
red LED  

Load side

Rated switching voltage
240 V AC  
Continuous current
12 A  
Max. switching frequency at rated load
0,1  Hz
Max. switching voltage, AC
250  V
Min. switching power
1 mA @ 24 V  
10 mA @ 12 V  
100 mA @ 5 V  
Inrush current
24 A / 20 ms  
AC switching capacity (resistive), max.
3000 VA  
DC switching capacity (resistive), max.
288 W @ 24 V  
Switch-on delay
≤ 15 ms  
Switch-off delay
≤ 10 ms  
Contact type
2 CO contact (AgNi)  
Mechanical service life
AC coil 20 x 106 switching cycles  
DC coil 30 x 106 switching cycles  

General data

Mounting rail
TS 35  
Test button available
Yes  
Version of test button
Lockable test button  
Momentary test button  
Mechanical switch position indicator
Yes  
Colour
black  

Insulation coordination

Rated voltage
250  V
Pollution severity
2  
Surge voltage category
III  
Insulating material group
IIIa  
Clearance and creepage distances for control side - load side
≥ 4 mm  
Dielectric strength for control side - load side
2.5 kVeff / 1 Min.  
Dielectric strength of neighbouring contacts
2.5 kVeff / 1 Min.  
Dielectric strength of open contact
1.2 kVeff /1 min.  
Impulse withstand voltage
5 kV (1.2/50 µs)  
Protection degree
IP20  

Further details of approvals / standards

Certificate no. (CSA) relay
249409-2426937  
Certificate no. (CSA) base
249409-2295474  
Certificate No. (DNV)
TAA000011A  
Certificate no. (cURus) relay
E522350  
Certificate no. (cURus) base
E223759  

Connection data

Wire connection method
PUSH IN  
Stripping length, rated connection
12  mm
Clamping range, rated connection
1,5  mm²
Clamping range, min.
0,75  mm²
Clamping range, max.
1,5  mm²
Wire cross-section, solid, min.
0,75  mm²
Wire cross-section, solid, max.
1,5  mm²
Wire cross-section, solid, max. (AWG)
AWG 16  
Wire connection cross section, finely stranded, min.
0,75  mm²
Wire connection cross section, finely stranded, max.
1,5  mm²
Wire cross-section, finely stranded, max. (AWG)
AWG 16  
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,75  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
0,75  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,75  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1  mm²
Blade size
0.6 x 3.5 mm  

Classifications

ETIM 6.0
EC001437  
ETIM 7.0
EC001437  
ETIM 8.0
EC001437  
ETIM 9.0
EC001437  
ETIM 10.0
EC001437  
ECLASS 9.0
27-37-16-01  
ECLASS 9.1
27-37-16-01  
ECLASS 10.0
27-37-16-01  
ECLASS 11.0
27-37-16-01  
ECLASS 12.0
27-37-16-01  
ECLASS 13.0
27-37-16-01  
ECLASS 14.0
27-37-16-01  
ECLASS 15.0
27-37-16-01