TS 35X15/LL 2M/ST/SZ
Product image
Similar to illustration
TS 35X15/LL 2M/ST/SZ
Product image
Similar to illustration
TS 35X15/LL 2M/ST/SZ

TS 35X15/LL 2M/ST/SZ

Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 15 mm

Référence produit 7907490000
Ouvrir dans le configurateur
Fiche technique Engineering Support Product Downloads
Tilbehør 20 Er tilbehør til 19 Anvendte produkter 19
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Mounting rail Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Változat
Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 15 mm 
Rendelési szám
7907490000 
Típus
TS 35X15/LL 2M/ST/SZ 
GTIN (EAN)
4032248296262 
Qty.
20 

Dimensions and weights

Mélység
15 mm
Depth (inches)
0,591 inch
Magasság
35 mm
Height (inches)
1,378 inch
Szélesség
2.000 mm
Width (inches)
78,74 inch
Net weight
611,111 g

Temperatures

Temperatura ambiente
-5 °C…40 °C 

Environmental Product Compliance

Stato conformità RoHS
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Mounting rail

Basic material
Steel 
Bohrlochdurchmesser
5,2 mm
Installation advice
Direct mounting 
Length of the terminal rail
  • min.:
    0 mm
  • nominal:
    2.000 mm
  • max.:
    2.000 mm
Pre-punched mounting rail
Yes 
Separación de ranura
  • min.:
    11 mm
  • nominal:
    11 mm
  • max.:
    11 mm
Short circuit strength corresponds to E-Cu wire
50 mm²
Short-time withstand current per second according to IEC 60947-7-2
6 kA
Slit gap
11 mm
Slit length
25 mm
Slit length
  • min.:
    25 mm
  • nominal:
    25 mm
  • max.:
    25 mm
Slit width
5,2 mm
Slit width
  • min.:
    5,2 mm
  • nominal:
    5,2 mm
  • max.:
    5,2 mm
Slotted drill holes
Yes 
Solder eyelet hole diameter (D)
5,2 mm
Spacing of holes, centre-to-centre
36 mm
Standards
In accordance with DIN EN 60715 
Surface finish
galvanic zinc plated and passivated 
Thickness
1,5 mm

Important note

제품 정보
Din rails with Sendzimier treatment have limited corrosion resistance on the outer and cut edges 

Classifications

ETIM 8.0
EC001285 
ETIM 9.0
EC001285 
ETIM 10.0
EC001285 
ECLASS 14.0
27-40-06-02 
ECLASS 15.0
27-40-06-02