WGK 4/Z BK BX
WGK 4/Z BK BX
Dimensional drawing

WGK 4/Z BK BX

OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 4 mm², Screw connection, Wemid (PA), black, Direct mounting, Feed-through (bushing)

Ürün No. 1250940000
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 5 İlgili ürünler 6
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Номинальные характеристики по IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Product images Classifications

Approvals

ROHS
Conform 

General ordering data

Version
OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 4 mm², Screw connection, Wemid (PA), black, Direct mounting, Feed-through (bushing) 
Order No.
1250940000 
Type
WGK 4/Z BK BX 
GTIN (EAN)
4050118042528 
Qty.
50 adet
Product data
IEC: 500 V / 32 A / 0.5 - 6 mm²
UL: 300 V / 30 A / AWG 30 - AWG 10 
Packaging
Box 

Dimensions and weights

Height
21,5 mm
Height (inches)
0,846 inch
Height of lowest version
21,5 mm
Ширина
8,1 mm
Width (inches)
0,319 inch
Length
10,1 mm
Length (inches)
0,398 inch
순중량
8,4 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Power - series WGK 
Wire connection method
Screw connection 
Conductor outlet direction
180° 
Number of poles
1 
Pin series quantity
1 
Fitted by customer
Yes 
Screwdriver blade
0.6 x 3.5 
Tightening torque, min.
0,6 Nm
Tightening torque, max.
0,8 Nm
Clamping screw
M 3 
Stripping length
8 mm
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Protection degree
IP20 
Type of connection 1
Clamping yoke 
Type of connection 2
Clamping yoke 

Material data

Insulating material
Wemid (PA) 
Colour
black 
Tableau des couleurs (similaire)
RAL 9011 
UL 94 flammability rating
V-0 
Contact material
Cu-alloy 
Contact surface
tinned 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C

Conductors suitable for connection

Campo di sezioni, min.
0,5 mm²
6 mm²
Vezeték csatlakozási keresztmetszet AWG, min.
AWG 30 
Wire connection cross section AWG, max.
AWG 10 
Solid, min. H05(07) V-U
0,5 mm²
Solid, max. H05(07) V-U
6 mm²
Stranded, min. H07V-R
0,5 mm²
Stranded, max. H07V-R
4 mm²
Flexible, min. H05(07) V-K
0,5 mm²
연선, 최대 H05(07) V-K
4 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
4 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0,5 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
4 mm²
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0372700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0373000000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Номинальные характеристики по IEC

пройдены испытания по стандарту
IEC 60664-1 
Rated current, min. number of poles (Tu=20°C)
32 A
Rated current, max. number of poles (Tu=20°C)
32 A
Rated voltage for surge voltage class / pollution degree III/3
500 V
Rated impulse voltage for surge voltage class/ contamination degree III/3
6 kV

Rated data acc. to CSA

Névleges feszültség (B felhasználási csoport / CSA)
300 V
Rated voltage (Use group C / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
30 A
Rated current (Use group C / CSA)
30 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 30 
Wire cross-section, AWG, max.
AWG 10 

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
300 V
Rated voltage (Use group C / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
30 A
Rated current (Use group C / UL 1059)
30 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 30 
Wire cross-section, AWG, max.
AWG 10 

Packing

Packaging
Box 
VPE length
155 mm
Largeur VPE
86 mm
Altezza VPE
84 mm

Important note

Poznámky
  • Clearance and creepage distances to other components must be devised in accordance with the relevant application standard. This can be achieved in the device by full encapsulation or by the use of additional spacer plates.
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Colours: SW = black; GN/YL = green/yellow; GY = grey
  • Additional variants on request
  • WGK: Rated voltage plastic walls: 1 - 4 mm = 500 V; metal walls: 1 - 2.5 mm = 400 V; metal walls: 2.5 - 4 mm = 250 V
  • WGKV: Rated voltage plastic walls: 1 - 4 mm = 400 V; metal walls: 1 - 2.5 mm = 400 V; metal walls: 2.5 - 4 mm = 250 V
  • VWGK: Rated voltage plastic walls: 1 - 4 mm = 500 V; metal walls: 1 - 4 mm = 500 V
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Product images

Classifications

ETIM 8.0
EC001283 
ETIM 9.0
EC001283 
ETIM 10.0
EC001283 
ECLASS 14.0
27-14-11-34 
ECLASS 15.0
27-14-11-34