CH20M6 BP 4P-4P BUS GY LF 1 1261516
Product image
CH20M6 BP 4P-4P BUS GY LF 1 1261516
Product image
CH20M6 BP 4P-4P BUS GY LF 1 1261516
Product image
CH20M6 BP 4P-4P BUS GY LF 1 1261516
Product benefits
Base element including BUS cut-out
CH20M6 BP 4P-4P BUS GY LF 1 1261516
Dimensioned drawing

CH20M6 BP 4P-4P BUS GY LF 1 1261516

Modular housing, OMNIMATE Housing - series CH20M Pebble grey, Housing base, Recess in detent foot area for BUS contact, Width: 6.1 mm

Ürün No. 2771440000
Konfigüratörde aç
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 4 Karşı parçalar 5 İlgili ürünler 5
Approvals General ordering data Dimensions and weights Environmental Product Compliance Material data General data Assembly properties Mechanical tests Component properties Design - IN requirements Individualization options Classifications

Approvals

ROHS
Conform 

General ordering data

버전
Modular housing, OMNIMATE Housing - series CH20M Pebble grey, Housing base, Recess in detent foot area for BUS contact, Width: 6.1 mm 
주문 번호
2771440000 
Typ
CH20M6 BP 4P-4P BUS GY LF 1 1261516 
GTIN (EAN)
4064675032175 
Qty.
50 adet

Dimensions and weights

깊이
114,3 mm
Depth (inches)
4,5 inch
Wysokość
110,7 mm
Height (inches)
4,358 inch
Width
6,1 mm
Width (inches)
0,24 inch
Net weight
2,32 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Material data

Basic material
Plastic 
Comparative Tracking Index (CTI)
400 ≤ CTI <600 
Insulating material
PBT 
Insulating material group
II 
Surface finish
untreated 
UL 94 flammability rating
V-0 

General data

Colour
Pebble grey 
Colour chart (similar)
RAL 7032 
Encapsulation option
No 
Mounting rail
TS 35 
Protection degree
IP20 in installed state 

Assembly properties

Number of PCBs, max.
1 
Number of connection levels, max.
8 
Number of poles, max.
8 
Height of components on the PCB, max.
3,5 mm
Type of assembly of the PCB
one-sided 

Mechanical tests

According to Standard
DIN EN 61373:1999 (shock and vibration) 
Test conditions
50g additional weight on the PCB 
with endbrackets WEW 35/1 (1059000000) 
four housings installed in a row 
Proved axles
X 
Y 
Z 
Shock test
  • General test advices:
    All mechanical tests were tested on examplary setup, or in view of depending regulation. The specified results do not replace approval relevant tests. They are just orientation values.
  • Test category:
    1
  • Number of shocks per axle:
    3 in positive and negative direction
  • Shock duration:
    30 ms
  • Acceleration horizontal:
    50 m/s²
  • Acceleration vertical:
    50 m/s²
  • Acceleration longitudinal:
    50 m/s²
Vibration test
  • Test category:
    1B
  • Test duration:
    5 hours per axle
  • Effective acceleration:
    7,9 m/s²

Component properties

Cut out in clip-on foot area as preperation for
BUS-contact 
contact not included! 
Number of connection levels, max.
8 

Design - IN requirements

NYÁK vastagsága
0,8 mm
Tolerance for the PCB shape
±0.1 mm 
Tolleranza di spessore del circuito stampato
±0.1 mm 

Individualization options

Alternitive colours
More on request 
Customer specific cutouts possible
Yes 
Customer specific labelling possible
Yes 
Kundenspezifischer Bestellprozess
See guideline under downloads 

Classifications

ETIM 8.0
EC001031 
ETIM 9.0
EC001031 
ETIM 10.0
EC001031 
ECLASS 14.0
27-19-06-01 
ECLASS 15.0
27-19-06-01