LSF-SMT 7.50/03/90 3.5SN BK TU
Product image
LSF-SMT 7.50/03/90 3.5SN BK TU
Product image
LSF-SMT 7.50/03/90 3.5SN BK TU
Dimensional drawing
LSF-SMT 7.50/03/90 3.5SN BK TU
Graph
LSF-SMT 7.50/03/90 3.5SN BK TU
Graph

LSF-SMT 7.50/03/90 3.5SN BK TU

Printed circuit board terminals, 7.50 mm, Number of poles: 3, 90°, Solder pin length (l): 3.5 mm, black, PUSH IN with actuator, Clamping range, max. : 1.5 mm², Tube

Produkt ID 1824890000
Download datablad Engineering Support Product Downloads
Anvendte produkter 24
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319226/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319230/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate No. (cURus)
E60693 

General ordering data

Version
Printed circuit board terminals, 7.50 mm, Number of poles: 3, 90°, Solder pin length (l): 3.5 mm, black, PUSH IN with actuator, Clamping range, max. : 1.5 mm², Tube 
Order No.
1824890000 
Тип
LSF-SMT 7.50/03/90 3.5SN BK TU 
GTIN (EAN)
4032248327515 
Qty.
28 Styk
Product data
IEC: 800 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 28 - AWG 14 
Packaging
Tube 

Dimensions and weights

깊이
14,75 mm
Depth (inches)
0.581 inch
Höjd
13,15 mm
Height (inches)
0.518 inch
Height of lowest version
8,5 mm
Szerokość
19,2 mm
Width (inches)
0.756 inch
Net weight
3,286 g

Temperatures

Continuous operating temp., max.
120 °C

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Famiglia prodotti
OMNIMATE Signal - series LSF 
Tecnica di collegamento cavi
PUSH IN with actuator 
Montaggio su circuito stampato
THT/THR solder connection 
Direzione d'uscita del conduttore
90° 
Passo in mm (P)
7,5 mm
Passo in pollici (P)
0,295 "
Numero di poli
3 
Pin series quantity
1 
assemblabile da parte del cliente
No 
Number of rows
1 
Lunghezza spina a saldare (l)
3,5 mm
Tolleranza della lunghezza del codolo a saldare
0 / -0.3 mm 
Dimensioni del codolo a saldare
0.35 x 0.8 mm 
Dimensioni del codolo a saldare = tolleranza d
0 / -0.1 mm 
Diametro foro di equipaggiamento (D)
1,1 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
Number of solder pins per pole
2 
Stripping length
8 mm
L1 in mm
15 mm
L1 in inches
0,591 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 
Volume resistance
1.60 mΩ 

Material data

Insulating material
LCP GF 
Colour
black 
Colour chart (similar)
RAL 9011 
Insulating material group
IIIa 
Comparative Tracking Index (CTI)
≥ 175 
Moisture Level (MSL)
1 
UL 94 flammability rating
V-0 
Contact material
Cu-alloy 
Layer structure of solder connection
4...6 µm Sn matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-30 °C
Temperature range, installation, max.
120 °C

Conductors suitable for connection

Clamping range, min.
0,13 mm²
1,5 mm²
Wire connection cross section AWG, min.
AWG 28 
Wire connection cross section AWG, max.
AWG 14 
Solid, min. H05(07) V-U
0,2 mm²
Solid, max. H05(07) V-U
1,5 mm²
Flexible, min. H05(07) V-K
0,2 mm²
Flexible, max. H05(07) V-K
1,5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,25 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
0,75 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0,25 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
1,5 mm²
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,25 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9025760000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,34 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9025770000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0690700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9021040000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Rated current, min. number of poles (Tu=20°C)
17,5 A
Rated current, max. number of poles (Tu=20°C)
17,5 A
Rated current, min. number of poles (Tu=40°C)
17,5 A
Rated current, max. number of poles (Tu=40°C)
15 A
Rated voltage for surge voltage class / pollution degree II/2
800 V
Rated voltage for surge voltage class / pollution degree III/2
630 V
Rated voltage for surge voltage class / pollution degree III/3
500 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
6 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
6 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
6 kV
Short-time withstand current resistance
3 x 1s with 80 A 

Rated data acc. to CSA

Istituto (CSA)
CSA 
N° certificato (CSA)
200039-1664286 
Tensione nominale (Gruppo B / CSA)
300 V
Tensione nominale (Gruppo C / CSA)
150 V
Tensione nominale (Gruppo D / CSA)
300 V
Corrente nominale (Gruppo B / CSA)
10 A
Corrente nominale (Gruppo C / CSA)
10 A
Courant nominal (groupe d'utilisation D / CSA)
10 A
Sezione di collegamento cavo AWG, min.
AWG 28 
Sezione di collegamento cavo AWG, max.
AWG 14 
Riferimento ai valori di omologazione
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

Istituto (cURus)
CURUS 
Tanúsítvány száma (cURus)
E60693 
Tensione nominale (Gruppo B / UL 1059)
300 V
Tensione nominale (Gruppo C / UL 1059)
150 V
Tensione nominale (Gruppo D / UL 1059)
300 V
Corrente nominale (Gruppo B / UL 1059)
12 A
Corrente nominale (Gruppo C / UL 1059)
10 A
Corrente nominale (Gruppo D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 28 
Sezione di collegamento cavo AWG, max.
AWG 14 
Riferimento ai valori di omologazione
Specifications are maximum values, details - see approval certificate. 

Packing

Imballaggio
Tube 
Lunghezza VPE
556 mm
Larghezza VPE
20 mm
Altezza VPE
15 mm
Resistenza superficiale
Rs = 109 - 1012 Ω 

Type tests

Test: Durabilità delle siglature
  • Standard:
    DIN EN 60512-1-1 / 01.03
  • Test:
    mark of origin, type identification, pitch, approval marking UL, durability
  • Evaluation:
    available
Test: Sezione bloccabile
  • Standard:
    DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.14 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.14 mm²
    • Type of conductor and conductor cross-section:
      solid 1.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed
Test per danni ai conduttori e allentamento accidentale degli stessi
  • Standard:
    DIN EN 60999-1 section 9.4 / 12.00
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
  • Evaluation:
    passed
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
  • Evaluation:
    passed
  • Requirement:
    0.4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 1.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed
Test di estrazione
  • Requirement:
    ≥10 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
  • Evaluation:
    passed
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      H05V-U0.5
  • Evaluation:
    passed
  • Requirement:
    ≥40 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U1.5
    • Type of conductor and conductor cross-section:
      H07V-K1.5
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional push button colours on request
  • Operating force of slider max. 40 N
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule with plastic collar to DIN 46228/4
  • Wire end ferrule without plastic collar to DIN 46228/1
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Crimping shape "A" for wire end ferrules with PZ 6/5 crimping tool recommended.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01