PAS CMR 0,5...2,5 A DC
Product image
PAS CMR 0,5...2,5 A DC
Electric symbol
PAS CMR 0,5...2,5 A DC

PAS CMR 0,5...2,5 A DC

Current monitoring, 0.5...2.5 A DC, 1, Screw connection

Ürün No. 8742610000
Veri sayfasını indir Product Downloads
Aksesuarlar 2 İlgili ürünler 3
Approvals General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance General data Insulation coordination Input Output Connection data Classifications Tender specification sheets

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate no. (cULus)
E141197 

General ordering data

Version
Current monitoring, 0.5...2.5 A DC, 1, Screw connection 
Order No.
8742610000 
Type
PAS CMR 0,5...2,5 A DC 
GTIN (EAN)
4032248413928 
Qty.
10 adet

Dimensions and weights

Depth
95 mm
Depth (inches)
3,74 inch
Height
16 mm
Height (inches)
0,63 inch
Width
15,3 mm
Width (inches)
0,602 inch
Length
92 mm
Length (inches)
3,622 inch
Net weight
69,6 g

Temperatures

Storage temperature
-40 °C...85 °C 
Operating temperature
-20 °C...60 °C 
Humidity at operating temperature
0...95 % (no condensation) 
Humidity
5-95% relative humidity, Tu = 40°C, without condensation 

Probability of failure

SIL in compliance with IEC 61508
None 

Environmental Product Compliance

RoHS Compliance Status
Compliant 
REACH SVHC
No SVHC above 0.1 wt% 

General data

Configuration
none 
Mounting rail
TS 35 
Nominal power consumption
1,5 VA
Protection degree
IP20 
Temperature coefficient
350 ppm/K 

Insulation coordination

EMC standards
EN 55011 
EN 61000-6-1, 2, 3, 4 
Galvanic isolation
between input ⁄ output ⁄ supply ⁄ relay 
Impulse withstand voltage
6 kV 
Insulation voltage
4 kVeff / 1 min. 
Pollution severity
2 
Rated voltage
300 V 
Surge voltage category
III 

Input

Input current
0.5...2.5 A DC 
Input resistance, current
<50 mΩ 
Making current threshold
≤ 500 mA 
Max. current
7.5 A for 10 s 
Pulse duration
min. 1 ms 
Secure off
≤ 50 mA 

Output

Folytonos áram
100 mA 
Kopplingsfrekvens, max.
20 Hz 
Materiale dei contatti
RH/Rd (Reed contact)* 
Número de salidas
1 
Switching current
2 A 
Switching voltage DC, min.
1 V
Temperature coefficient
350 ppm/K 
Tensione di commutazion AC, max.
250 V
Tensione di commutazion AC, min.
1 V
Комплектация контактов
1 NO contact 
최대 스위칭 전압, DC
100 V

Connection data

Type of connection
Screw connection 
Clamping range, rated connection
1,5 mm²
Clamping range, min.
2,5 mm²
2,5 mm²

Classifications

ETIM 8.0
EC002654 
ETIM 9.0
EC002654 
ETIM 10.0
EC002654 
ECLASS 14.0
27-21-01-22 
ECLASS 15.0
27-21-01-22 

Tender specification sheets

Long specification

Limit-value monitoring of DC currents up to 2.5 A with switching output
limit-value monitoring component for measuring DC currents 0.5... 2.5 A with
switching output. The monitoring unit is designed so that it can be plugged onto the mounting base.


Pluggable unit on base, for mounting on TS35 DIN rail
Dimensions: L/W/H 92/ 15.3/ 95 mm
Screw connection / Nominal cross-section 2.5 mm2
Protection degree: IP 20

Input                         0.5...2.5 A DC / Reed relay coil
Switch-on threshold < 500 mA
Switch-off threshold      < 50 mA
Output                                             1 NO / Reed contact
Switching current max 100 mA AC/DC
Switching voltage 100 V AC / 50 V DC
Ambient
temperature range 0 °C...+55 °C

Secure isolation                   EN 50178, 2-way isolation up to 6 kV
Test voltage                               4 kVeff / 1 min. input against output
Rated
voltage                                          300 V AC/DC at overvoltage category III and pollution degree 2
Approvals cULus




Type                                                            PAS CMR 0.5...2.5 A DC



 
Short specification

Limit-value monitoring of DC currents up to 2.5 A with switching output
limit-value monitoring component for measuring DC currents 0.5... 2.5 A with
switching output. The monitoring unit is designed so that it can be plugged onto the mounting base.