VPU AC II 4 150/50
VPU AC II 4 150/50
Electric symbol
Schematic circuit diagram

VPU AC II 4 150/50

Surge voltage arrester, Low voltage, Surge protection, TN-C-S, TN-S

Référence produit 2591710000
Ouvrir dans le configurateur
Fiche technique Engineering Support Product Downloads
Aksesuarlar 4 Yedek parçalar 2 İlgili ürünler 4
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Rated data UL Connection data, remote alert General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Guarantee Important note Product images Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319230/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319263/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate No. (cURus)
E354261 

General ordering data

Utförande
Surge voltage arrester, Low voltage, Surge protection, TN-C-S, TN-S 
Order No.
2591710000 
Type
VPU AC II 4 150/50 
GTIN (EAN)
4050118599237 
Qty.
1 adet

Dimensions and weights

Глубина
68 mm
Depth (inches)
2,677 inch
Depth including DIN rail
76 mm
Height
90 mm
Height (inches)
3,543 inch
Width
72 mm
Width (inches)
2,835 inch
Net weight
448 g

Temperatures

Storage temperature
-40 °C...85 °C 
Ambient temperature
-40 °C…85 °C 
Operating temperature
-40 °C...85 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Rated data UL

Ambient temperature (operational), max.
85 °C
Rated Voltage UN
120 V
VPR (N-PE)
600 V
MCOV (L-PE)
150 V
MCOV (L/N-PE)
150 V
MCOV (N-PE)
150 V
SCCR
200 kA
In
20 kA
Category
SPD TYPE 1CA 
Ambient temperature (operational), min.
-40 °C
Certificate No. (cURus)
E354261 
MODE
all modes 
VPR (L-L)
1.000 V
VPR (L-N)
1.000 V
VPR (L-PE)
600 V
Voltage type
AC 
UL Energy Networks
3-phase WYE 

Connection data, remote alert

Connection type
PUSH IN 

General data

Colour
orange 
black 
Design
Installation housing; 4TE 
Insta IP 20 
Mounting rail
TS 35 
Operating altitude
≤ 4000 m 
Optical function display
green = OK; red = arrester is defective - replace 
Protection degree
IP20 in installed state 
Segment
Power distribution 
UL 94 flammability rating
V-0 
Version
Surge protection 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
III 

Rated data IEC / EN

Capacità di estinzione della corrente residua Ifi
Follow current need not be taken into account 
Combined pulse UOC
6 kV
Corriente de descarga Imáx. (8/20µs) conductor PE
50 kA 
Discharge current In (8/20µs) wire-PE
20 kA 
Energy coordination (≤10 m)
Type II 
Type III 
Frequency range, max.
60 Hz
Frequency range, min.
50 Hz
Fuse protection
No Fuse neccessary ≤315 A gG 
250 A gG @50 kA Isccr 
315 A gG @25 kA Isccr 
Integrated back-up fuse
No 
Leakage current at Un
0,7 mA
Levezetőáram (III. típus)
3 kA
Low voltage network
TN-C-S 
TN-S 
Mains voltage
120 V / 240 V 
Max. continuous voltage, Uc (AC)
150 V 
Nivel de protección Up at IN (L/N-PE)
≤ 1.25 kV 
Number of poles
4 
Rated voltage (AC)
120 V
Requirements category acc. to IEC 61643-11
Type II 
Type III 
Requirements class, acc. to EN 61643-11
T2 
T3 
Response time / fallback time
≤ 25 ns 
Short-circuit current rating ISCCR
50 kA
Signalling contact
No 
Standards
IEC 61643-11 
EN 61643-11 
UL 1449 
Temporary surge voltage (over-voltage) - TOV
229 V
tipo SPD
T2 
Voltage type
AC 

Connection data

Stripping length
18 mm
Wire connection method
Screw connection 
Type of connection
Screw connection 
Stripping length, rated connection
18 mm
Tightening torque, min.
3 Nm
Tightening torque, max.
4,5 Nm
Clamping range, rated connection
16 mm²
Clamping range, min.
1,5 mm²
35 mm²
Wire connection cross section AWG, min.
AWG 16 
Wire connection cross section AWG, max.
AWG 2 
Wire cross-section, solid, min.
1,5 mm²
Wire cross-section, solid, max.
35 mm²
Wire connection cross section, finely stranded, min.
1,5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Connection cross-section, stranded, min.
1,5 mm²
Connection cross-section, stranded, max.
35 mm²

Electrical data

Voltage type
AC 

General data

Number of poles
4 
Protection degree
IP20 in installed state 
Colour
orange 
black 

Guarantee

Time interval
5 years 

Important note

Product information
For use in DC applications, please use the fuse of SIBA Type NH2XL aR/aSF DC 1500 V 

Product images

Classifications

ETIM 8.0
EC000941 
ETIM 9.0
EC000941 
ETIM 10.0
EC000941 
ECLASS 14.0
27-17-12-02 
ECLASS 15.0
27-17-12-02