DRIKITP115VAC 1CO LD/PB
Product image
Similar to illustration
DRIKITP115VAC 1CO LD/PB
Wiring diagram
DRIKITP115VAC 1CO LD/PB
Graph
DC load limit curve
Resistive load
DRIKITP115VAC 1CO LD/PB
Graph
Electrical service life
DRIKITP115VAC 1CO LD/PB
Graph
AC operational voltage range
DRIKITP115VAC 1CO LD/PB
Dimensional drawing
Relay in combination with base
DRIKITP115VAC 1CO LD/PB
Miscellaneous
Type codes

DRIKITP115VAC 1CO LD/PB

D-SERIES DRI, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 115 V AC, Continuous current: 10 A, PUSH IN, Test button available: Yes

Tuotteen tunnus 2576180000
Avaa konfiguraattorissa
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 9 Yksittäiset osat 3 Samankaltaiset tuotteet 8
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
D-SERIES DRI, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 115 V AC, Continuous current: 10 A, PUSH IN, Test button available: Yes 
Order No.
2576180000 
Type
DRIKITP115VAC 1CO LD/PB 
GTIN (EAN)
4050118585940 
Qty.
10 items

Dimensions and weights

Depth
63 mm
Depth (inches)
2,48 inch
Height
102,1 mm
Height (inches)
4,02 inch
Width
15,9 mm
Width (inches)
0,626 inch
Net weight
56,338 g

Temperatures

Storage temperature
-40 °C...85 °C 
Ambient temperature
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Control side

Rated control voltage
115 V AC 
Rated current AC
9.3 mA 
Power rating
1.1 VA 
Coil resistance
6200 Ω ± 10 % 
Status indicator
red LED 

Load side

Névleges kapcsolási feszültség
250 V AC 
연속 전류
10 A 
Frecuencia de conex. máx. con carga nom.
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
10 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
AC switching capacity (resistive), max.
2500 VA 
DC switching capacity (resistive), max.
240 W @ 24 V 
Switch-on delay
≤ 15 ms 
Switch-off delay
≤ 10 ms 
Contact type
1 CO contact (AgSnO) 
Mechanical service life
10 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
Yes 
Version of test button
Lockable test button 
Momentary test button 
Mechanical switch position indicator
No 
Colour
black 
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Pusher
  • UL94 flammability rating:
    HB
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB

Insulation coordination

Rated voltage
300 V
Pollution severity
2 
Surge voltage category
III 
Insulating material group
IIIb 
Clearance and creepage distances for control side - load side
≥ 3 mm 
Dielectric strength for control side - load side
5 kVeff / 1min 
Spänningstålighet för öppna kontakter
1 kVeff / 1 min 
Impulse withstand voltage
5 kV (1.2/50 µs) 
Impulse withstand voltage at neighbouring contacts
4.8 kV (1.2/50 µs) 
Stupeň krytí
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Номер сертификата (cURus), основание
E312083 

Connection data

Wire connection method
PUSH IN 
Stripping length, rated connection
10 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,14 mm²
1,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 16 
Wire cross-section, solid, min.
0,14 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire connection cross section, finely stranded, min.
0,14 mm²
Wire connection cross section, finely stranded, max.
1,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,14 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,14 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5 mm²
Blade size
0.4 x 2.5 mm 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01