KLIPPON BDX M20 S
Similar to illustration

KLIPPON BDX M20 S

Klippon BDX (compensating elements), Compensating element, M 20, 10 mm, IP66, Stainless steel 1.4404 (316L)

Produkt ID 2519550000
Download datablad Engineering Support Product Downloads
Anvendte produkter 5
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Certificate numbers cable gland General information Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Klippon BDX (compensating elements), Compensating element, M 20, 10 mm, IP66, Stainless steel 1.4404 (316L) 
주문 번호
2519550000 
種別
KLIPPON BDX M20 S 
GTIN(EAN)
4050118532043 
Qty.
1 Styk

Dimensions and weights

높이
12 mm
Height (inches)
0,472 inch
Szélesség
27 mm
Width (inches)
1,063 inch
길이
22 mm
Length (inches)
0,866 inch
Net weight
60 g

Temperatures

작동 온도
-60 °C...200 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Certificate numbers cable gland

Approval conditions
ATEX 
IECEX 
UL AEx Class Div. 
UL AEx Class Zone 
Certificate no. cable gland (CSA)
E340660 
Identification
Ex e IIC Gb 
Ex ta IIIC Da 
Núm. de certificación de prensaestopas (IECEx)
IECEx CML 19.0105X 
Číslo certifikátu, kabelová průchodka (ATEX)
CML 19ATEX3347X 

General information

AF size 1
27 mm
Air flow
0.25 l / 1 h 
Basic material
Stainless steel 1.4404 (316L) 
Cable gland
M 20 
Explosion protection type
Ex e 
External thread
M 20 
Filter
Bronze insert (90% copper, 10% tin) 
Halogen
halogen-free 
Head diameter
26,2 mm
Impact resistance
7 J ATEX version 
Length of thread
10 mm
Note: protection class
- The venting element should be fitted on the bottom side of the enclosure, aligned vertically with the thread upwards, and at the lowest point to permit proper drainage. - The supplied assembly instructions must be read prior to installation and strictly adhered to. - The water flow rate was tested using a water-filled, empty enclosure (no pressure or heat-producing internal components). The water flow rate may vary due to operational parameters and environmental conditions. 
O-Ring
Silicone 
Operating temperature range, max.
200 °C
Operating temperature range, min.
-60 °C
Pitch of thread
1,5 mm
Protection class (UL)
Type 4 
Protection degree
IP66 
Protection degree with GWDR
IP66 
Sealing
Silicone 
Silicone
Yes 
Standards
IEC 60079-0 
IEC 60079-7 
IEC 60079-31 
Tightening torque
5 Nm
Torque for connecting adapter, max.
5 Nm
Torque for connecting adapter, min.
5 Nm
Torque for lock nut, max.
5 Nm
Torque for lock nut, min.
5 Nm

Classifications

ETIM 8.0
EC000814 
ETIM 9.0
EC000814 
ETIM 10.0
EC000814 
ECLASS 14.0
27-18-28-17 
ECLASS 15.0
27-18-28-17