ACT20D-LED-FI-AO-2RC-AC-DC
Product image
ACT20D-LED-FI-AO-2RC-AC-DC
ACT20D-LED-FI-AO-2RC-AC-DC
Dimensioned drawing
ACT20D-LED-FI-AO-2RC-AC-DC
Wiring diagram
ACT20D-LED-FI-AO-2RC-AC-DC
Wiring diagram
ACT20D-LED-FI-AO-2RC-AC-DC
ACT20D-LED-FI-AO-2RC-AC-DC

ACT20D-LED-FI-AO-2RC-AC-DC

Display, Input : Frequency, Output : Display, analogue V / mA

Product ID 2920070000
Gegevensblad downloaden Engineeringondersteuning Productdownloads
Toebehoren 1 Verwante producten 4
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Display General data Input Output Output (digital) Output (analogue) Insulation coordination Connection data Classifications

Approvals

인증
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/cbf09862-97e9-475d-b71a-c6db1e3e9933/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Versione
Display, Input : Frequency, Output : Display, analogue V / mA 
Rendelési szám
2920070000 
유형
ACT20D-LED-FI-AO-2RC-AC-DC 
GTIN (EAN)
4099986580367 
Qty.
1 items

Dimensions and weights

깊이
120 mm
Depth (inches)
4,724 inch
높이
48,8 mm
Height (inches)
1,921 inch
너비
96,6 mm
Width (inches)
3,803 inch
Net weight
295 g

Temperatures

보관 온도
-40 °C...80 °C 
작동 온도
-20 °C...60 °C 

Environmental Product Compliance

RoHS 준수 상태
Compliant with exemption 
RoHS 면제(해당되거나 알려진 경우)
6c, 7a, 7cI 
REACH SVHC
Lead 7439-92-1 
Potassium perfluorobutane sulfonate 29420-49-3 
SCIP
f4905d12-f516-4eb5-90a8-8c87685bc956 

Display

Cycle time
2.2 times / s 
Decimal point
configurable 
9.999 
99.99 
999.9 
9999 
Dimmable
Yes 
Display range
-1999...9999 
Display value
current measured value 
Percentage or real value display 
Switching status 
Format
14 segment (numbers + letters) 
Scrolling text in 8 languages in case of error (e.g. sensor wire breakage, input overrange…) 
Scaling
Variable 
Type
red LED 
4-character display 
Digit size: 13.8 mm 

General data

Tension clamp connection with actuator 
Accuracy
absolute accuracy: <±0.1 % of the measurement range 
Configuration
Front push-button 
DIN Rail compatibility
No 
Power consumption
≤ 3.5 W 
Protection degree
IP65 
Supply voltage
21.6...253 VAC, (50...60 Hz) or 19.2...300 VDC 
Temperature coefficient
≤0,01% of measurement range⁄°C 
Type of mounting
Frontpanel mounting 
Front mounting 

Input

Input frequency
0.001…50 kHz 
Min. pulse duration (reset input)
20 μs...999,9 s 
Number inputs
1 
Response time
≤ 1 Period + 100 ms 
Sensor
S0 (trig-level low: ≤2.2 mA high: ≥9.0 mA ) 
Special current (trig-level: user-defined) 
Special voltage (trig-level: user-defined) 
TTL (trig-level low: ≤0.8 V high: ≥2.0 V) 
Tacho (trig-level low: ≤-50 mV high: ≥+50 mV) 
NAMUR sensor, according to EN60947-5-6 
NPN / PNP transistor (trig-level low: ≤4 V high: ≥7 V ) 
Trigger level adjustable 
Switch 
Sensor supply
5…17 V 
Type
Adjustable frequencies 

Output

Type
active 

Output (digital)

Alarm function
Over / under frequency 
Overspeed / underspeed 
Holding function can be activated 
Hysteresis
0...100 % 
Max. switching voltage, AC
250 V
Max. switching voltage, DC
30 V
Number of digital outputs
2 
Rated switching current
2 A 
Rated switching voltage
24 V AC ... 250 V AC 
Switch-off delay
0...3600 s 
Switch-on delay
0...3600 s 
Switching capacity
500 VA 
Switching thresholds
All values in display range are configurable 
Type
2 x 1 CO contact (hard gold-plated) 
Type of switch function
direct or inverted 

Output (analogue)

Load resistance current
≤ 800 Ω 
Number analogue outputs
1 
Output behaviour on failure downscale
3,5 mA
Output behaviour on failure upscale
23 mA
Signal output
direct or inverted 
Type (analogue output)
'active','connected control must be passive' 

Insulation coordination

Galvanic isolation
between input ⁄ output ⁄ supply ⁄ relay 
Insulation voltage
2.3 kVAC (Test) / 250 VAC (operating state) 
Nedsmutsningsgrad
2 
Категория перенапряжения
II 
Нормы по ЭМС
EN 61326-1 

Connection data

Vezetékcsatlakozás-technika
Clamping yoke 
pluggable 
Tension clamp connection with actuator 
Wire connection cross section AWG, min.
AWG 30 
Wire connection cross section AWG, max.
AWG 16 
Wire connection cross section, finely stranded, min.
0,13 mm²
Wire connection cross section, finely stranded, max.
2,8 mm²

Classifications

ETIM 8.0
EC000677 
ETIM 9.0
EC000677 
ETIM 10.0
EC000677 
ECLASS 14.0
27-14-31-10 
ECLASS 15.0
27-14-31-10