DRMKIT 220VDC 4CO LD
Product image
Similar to illustration
DRMKIT 220VDC 4CO LD
Wiring diagram
DRMKIT 220VDC 4CO LD
Graph
DC load limit curve
Resistive load
DRMKIT 220VDC 4CO LD
Graph
Electrical service life
DRMKIT 220VDC 4CO LD
Graph
Derating curve
DRMKIT 220VDC 4CO LD
Graph
DC operational voltage range
DRMKIT 220VDC 4CO LD
Dimensional drawing
DRMKIT 220VDC 4CO LD
Miscellaneous
Type codes

DRMKIT 220VDC 4CO LD

D-SERIES DRM, Relay module, Number of contacts: 4, CO contact AgNi flash gold-plated, Rated control voltage: 220 V DC, Continuous current: 5 A, Screw connection, Test button available: No

Tuotteen tunnus 1542420000
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 14 Yksittäiset osat 4 Samankaltaiset tuotteet 8
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80)  
ROHS
Conform  

General ordering data

Version
D-SERIES DRM, Relay module, Number of contacts: 4, CO contact AgNi flash gold-plated, Rated control voltage: 220 V DC, Continuous current: 5 A, Screw connection, Test button available: No  
Order No.
1542420000  
Type
DRMKIT 220VDC 4CO LD  
GTIN (EAN)
4050118347296  
Qty.
10  items

Dimensions and weights

Depth
66,8  mm
Depth (inches)
2,63  inch
Height
79,9  mm
Height (inches)
3,146  inch
Width
27,2  mm
Width (inches)
1,071  inch
Net weight
93,35  g

Temperatures

Storage temperature
-40 °C...70 °C  
Ambient temperature
-40 °C…60 °C  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7a  
REACH SVHC
Lead 7439-92-1  
SCIP
611f3393-31e7-4ef5-8360-95619a629f27  

Control side

Rated control voltage
220 V DC  
Rated current DC
5.2 mA  
Power rating
1.2 W  
Coil resistance
42000 Ω ± 10 %  
Status indicator
Green LED  
Protective circuit
Free-wheeling diode  

Load side

Rated switching voltage
250 V AC  
Continuous current
5 A  
Max. switching frequency at rated load
0,1  Hz
Max. switching voltage, AC
250  V
Min. switching power
10 mA @ 12 V  
100 mA @ 5 V  
Inrush current
10 A / 50 ms  
AC switching capacity (resistive), max.
1250 VA  
DC switching capacity (resistive), max.
120 W @ 24 V  
Switch-on delay
<20 ms  
Switch-off delay
<20 ms  
Contact type
4 CO contact (AgNi flash gold-plated)  
Mechanical service life
20 x 106 switching cycles  

General data

Mounting rail
TS 35  
Test button available
No  
Mechanical switch position indicator
Yes  
Colour
black  
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay status indicator
  • UL94 flammability rating:
    HB
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB

Insulation coordination

Rated voltage
250  V
Pollution severity
2  
Surge voltage category
III  
Insulating material group
C  
Clearance and creepage distances for control side - load side
≥ 5.5 mm  
Dielectric strength for control side - load side
1.8 kVeff /1 min.  
Dielectric strength of neighbouring contacts
1 kVeff / 1 min  
Dielectric strength of open contact
1 kVeff / 1 min  
Impulse withstand voltage
4.8 kV (1.2/50 µs)  
Protection degree
IP20  

Further details of approvals / standards

Certificate no. (cURus) relay
E312083  
Certificate no. (cURus) base
E312083  

Connection data

Wire connection method
Screw connection  
Stripping length, rated connection
7  mm
Tightening torque, min.
0,5  Nm
Tightening torque, max.
0,7  Nm
Clamping range, min.
0,5  mm²
Clamping range, max.
2,5  mm²
Wire cross-section, solid, min.
0,5  mm²
Wire cross-section, solid, max.
2,5  mm²
Wire connection cross section, finely stranded, min.
0,5  mm²
Wire connection cross section, finely stranded, max.
2,5  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,5  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2,5  mm²
Wire connection cross section, finely stranded, two clampable wires, min.
0,5  mm²
Wire cross-section, finely stranded, two clampable wires, max.
1  mm²
Blade size
size PH1  

Classifications

ETIM 6.0
EC001437  
ETIM 7.0
EC001437  
ETIM 8.0
EC001437  
ETIM 9.0
EC001437  
ETIM 10.0
EC001437  
ECLASS 9.0
27-37-16-01  
ECLASS 9.1
27-37-16-01  
ECLASS 10.0
27-37-16-01  
ECLASS 11.0
27-37-16-01  
ECLASS 12.0
27-37-16-01  
ECLASS 13.0
27-37-16-01  
ECLASS 14.0
27-37-16-01  
ECLASS 15.0
27-37-16-01